Tag: <span>installation</span>

[ad_1]

You might just be at that point, where the small, wired home network you created a few months ago just is not doing it for you anymore and you want to extend it with a wireless network. Of course, you might as well be at that point, where you want to build a completely new network. Whichever the reason may be, the problem is the same – you need to know exactly how to do a wireless network installation.

Most of the time, you will find it necessary to install a wireless router. Now, you will only need to install one of these if you either are building your first home network or simply want to keep the wireless network installation at the simplest level as possible. Remember to install the router in a somewhat central location in your home so this way all receivers will be almost in the same line of sight. You see, with wireless internet, the speed depends on the distance from the router to the receiver. All you have to do now is connect your router to a power source, and of course an Internet source. Nowadays many routers support broadband modems and even dial-up connections. Still, when you buy a router make sure that it has an RS-232 serial port if you need the dial-up connection, because otherwise you will find yourself having a useless router. Last, but not least, you can also connect a wired router (called a switch or a hub) because wireless routers generally do contain built-in access points.

Now choose the name of your network. Often with Wi-Fi the network names are generically called SSID. Of course, this SSID has to be identical with all computers that are sharing the same wireless router. For your own protection, it is recommended that no matter what name your router manufacturer set to change it to something else. In order to find a network name for your router all you have to do is consult the product documentation. Finally, read the documentation to find out how to handle WEP security and also how to turn on firewall features and how to set other options.

Wireless Access Points

One wireless type network connection is supported by only one access point. It is very important to remember this further on. It is recommended to use this type of access point only if you indeed need the features that only a wireless router can provide and also you want to have more than three or four computers around the house that will be connected to the internet. You can read more at http://www.howtosetupwirelessnetwork.com

The positioning rule is the same as with wireless routers – access points have to be placed in a central location so that all receivers will be in the same line of sight. Plug in the power cord and if necessary the dial-up internet connection as well. Now cable the access points to your hub or switch. In this case, you will not have to configure any firewalls at all, yet you will still have to set a network name and enable the WEP function.

Giving these two options of installing a wireless network in your house, from this point on, all you have to do is install them in your own operating system and you’re good to go.

[ad_2]

Source by Dean Forster

[ad_1]

There are many ways for you to install a television antenna, there are many techniques and ways to get the job done too, but also keep in mind that not every single method may work for your benefit. Installing an antenna can be a simple matter for people who are in the know and at the same time, it can be also very difficult for the people who have no experience whatsoever. Before the aerial installation can take place, the first thing that needs to be considered is the antenna itself. Many people are so excited to buy an antenna that they choose whatever they want at first and then end up wasting money because that type would never work on his or her location. This is the reason why you need to play safe whenever you want to get an aerial installation.

Not just any method or way works for installing an antenna, as mentioned earlier, the antenna can be quite hard to install if you do not know what you are doing. The antenna is also very delicate and you might end up breaking it or damaging it if you will not handle it properly. You cannot just simply put it on the side of your house or even tie it up on a tree and then expect that it will work beautifully. A good reason to play it safe when you want to get an antenna installed is that it may cost you a lot of money when you do it carelessly. Picking the wrong antenna will cost you, damaging your roof during the installation will cost you as well.

Installing an antenna requires finesse and care, you will have to be very careful that during the installation, you will not damage the roofing and create holes or puddles that will require you to spend more money for repairs afterwards. Installing the antenna requires a big amount of expertise and if you are not careful or if you totally do not know anything about it, you will definitely end up doing the same simple job over and over again and this can be quite tiresome and at the same time it can also be quite a chore. Trial and errors may lead to more damage and when you are up to your neck with trying to get the signal, you may end up giving up and scrapping the project.

Another reason why you need to play it safe is because installing an aerial installation may cost you your life and your health. There have been tons of reports about accidents such as falls and electrocutions when people carelessly do the job on their own. As you can see, always think things thoroughly before you decide on what action to take, safety must always be a priority and always keep in mind, some things are worth paying for because some things are not worth risking your life.

[ad_2]

Source by Mica G

[ad_1]

CCTV Installation

You need CCTV installation and assistance with installing security! Having an on site security guard is the traditional way of protecting property. With the advent of affordable CCTV systems, the number of security guards on the property was reduced. In today’s security world, CCTV provides modern property protection and effectively eliminates the need for an on site security staff.

Motion detector circuitry has been installed in CCTV cameras for years. Multiplexers and Digital Video Recorders have motion detector circuits installed in them. These motion detector circuit fields can be individualized for each cameras view. These fields, have in the past, brought up the camera view onto a main monitor for the on site security staff. The alarm in the motion detector also signaled the VCR or DVR to start recording in real time.

In today’s security world, the motion detector alarm state opens a link through the Internet to a central station that monitors multiple sites or facilities. This capability enables one central station operator to monitor multiple sites. This ability eliminates the need for a security person to be staffed at each site to monitor the cameras on site (so it is vital when installing security you install CCTV installation). The central station operator upon receiving an alarm can either notify the local law enforcement or if it is a false alarm can dismiss the alarm and reset the system.

Advances in technology have enabled the property owner to install CCTV systems on their property and eliminate the need for a security staff. The combination of cameras, Internet and motion detection allow for 24/7 surveillance of the property. The cost of installing the CCTV system and the monthly charge for the central station services provide a return on investment that is recovered in 12 months in most cases.

People, including security staff are human and make mistakes. That is why it’s important to have CCTV installation when installing security systems. CCTV systems always see what is within their field of view and will do what they are programmed to do. In this case, the motion detector circuits will transmit an alarm signal to the central station and provide the image of the alarmed state to the central station. This pre-programmed reliability and dependability will provide 24/7 security to the property.

Did you learn something about CCTV Installation? I think you’ll find this article helpful too, if you did, I reckon you’ll want to read the article mentioned below!

[ad_2]

Source by Jonathon Sparks

[ad_1]

Without wasting any time, let’s just get down to business.

Mistake #1: Not Setting the Side Braces Correctly

There are so many different styles of oval pools it is hard to be specific here, but in most cases, following the instructions every step of the way will give good results.

Your most important objectives are to lay out all the braces and square them before you start digging. Dig out what you need to, without a lot of over digging. The less back fill the better.

Your oval pool side braces should be perfectly level, front and back. They should all be square side to side and on one side they should all be touching a string line. Only then should the dirt be packed back in around them.

An oval pool starts to look real funny when the braces on one side are not square with the braces on the opposite side. It starts looking even funnier when one side is not straight, as in resting flush with a string line. That would mean the other side is not straight either. If they go up and down a little, and in and out a little, things start getting really weird looking.

The proper use of a laser level, a string line and a tape measure will take care of this common mistake.

Mistake #2: Not Properly Covering the Pressure Plates and Straps

I’ve been answering pool questions online for many years and it always amazes me how often I get asked about indentations in the liner around the brace assemblies just inside the pool. This can be a major problem, meaning the pool is not safe and needs to be drained so repairs can be made. The liner cannot sit on the bare metal of anything, there must be a cushion.

The problem is usually ground settling around the brace channels or pressure plates. The weight of the water when the pool is full is tremendous, what you put under it needs to be solid. This means not just back filling around the brace assemblies, but packing it solid. If needed, water, wait and pack some more.

The other mistake is not covering the pressure plates with enough sand. Some of these things are big, and all of them have sharp edges. They are very important to the integrity of a pool, and cannot be left out, but they must be well covered. Remember, the weight of the water increases as the pool fills, whatever is over those plates will compress. Not only will sand compress it will also shift into large openings, like those created at the ends of pressure plates.

Be sure your side brace assemblies are well packed and well covered.

Mistake #3: Not Properly Blocking the Side Braces

Have I already mentioned the weight of the water? Yes I have, and it pushes out on the pool walls just like it pushes down on the floor. That’s why using a concrete block under the back of each brace is important. Just as important, these blocks need to be set perfectly level and on firm ground.

I also mentioned the side braces going in and out as you look down the side of the pool. While the braces may look OK before adding water, if the blocks are not solid and level, the braces will push out as the pool fills, and they never push out the same. This leaves the side of your pool going in and out. This is not a good professional look.

If you are attempting an oval above ground pool installation on your own, be sure to spend the time required to properly set the side braces. The posts that line the sides of your pool will make or break the final results.

[ad_2]

Source by Dennis Gourley

[ad_1]

Roof valleys are a frequent source of leaks in older houses. Installation procedures differ depending on the roof type and materials used. We will look here at the basic installation of an open lead lined roof valley.

A roof valley is basically a gutter set between two meeting pitched roofs. Depending on the roof area it serves, the valley is the exit point for a large volume of water so extreme care should be taken with installation. If the roof has been leaking for a while or if there are any signs of rot, you will need to start by replacing the valley boards. Lead sheet is not self supporting and should be placed on treated roofing boards of sufficient strength to hold a large person. (Most roofing contractors are big guys!) Fit boards of sufficient width to accommodate the lead plus 100mm either side. This will give you something to nail the roofing batons to.

The top of the valley boards should be at the same level as the top of the roof rafters. If you lay the boards directly on top of the rafters it may cause the roofing tiles to kick up and restrict water run off. You will need to cut the valley boards to fit in between the rafters. Support the valley boards with studs or noggins. The valley should finish on an even plane at the eaves. It should not kick up higher than the bottom rafters. If it does, you will need to cut the fascia board or adjust the gutter to suit. It is a good idea to fit a tilting fillet each side of the valley. This angled strip of wood runs along the valley length and should be a minimum of 150mm from the centre of the valley. It should sit no higher than the roofing batons with the thinnest end closest to the centre of the valley.

It is common practice to fit a single sheet of roofing underlay the entire length of the valley. The adjacent roofing underlay will rest on top of this sheet. I recommend you use one of the new advanced synthetic underlay materials. The older bitumen based felts are fine for normal roofing situations but are not suitable for valleys. Over time the bitumen will bond the lead to the boards and restrict thermal movement. You should ensure you buy lead of a sufficient grade/code for valley applications. This should be between 1.80mm and 2.24mm thickness. If you are unsure ask your roofing merchant of the correct grade. The lead should be cut into sections no larger than 1.5 meters in length to allow sufficient thermal movement. Bend a welt into the lead 25mm each side. This acts as a last line of defence for water penetration. It also has the added benefit of stiffening the lead, which makes carrying it up the roof a lot easier.

Starting at the bottom of the valley, dress the lead neatly onto the valley boards and over the tilting fillets. The bottom of the lead should allow correct drainage into the gutter. Fix two rows of nails at the very top of the flashing. Use copper or stainless steel nails. Never use galvanised or aluminum nails which will just react with the lead and corrode. I recommend you use the minimum amount of fixing possible to hold the lead in place. If you over fix lead sheeting it will eventually split due to thermal movement. So don’t nail the sides. When you have successfully dressed the first sheet you can move up the roof laying subsequent sheets. Overlap each sheet a minimum of 150mm. On lower pitched roof valleys you will need to increase the lap. Where the valley ends at the ridge, you will need to dress the lead so it can sit neatly under the ridge tiles. You are now ready to start fixing the batons and laying the roofing tiles. The key points to remember are to keep the sheet lengths down to 1.5 meters and don’t over fix. If you follow the procedure outlined and take care with the dressing you will produce a durable maintenance free valley.

[ad_2]

Source by Simon Cowham

[ad_1]

In order to trust a contractor with your home-one of your most valuable assets-the decision-making process to hire the best company is critical. Many companies are out there, but how do you choose the best one? Well, there are many highlights of a roofing company to make sure that you choose the best one for roof and repair installation services.

The following qualities should be evident to make sure that you are choosing a contractor to fit you and your family’s needs:

• The roof and gutter installers should believe in getting the job done right the first time. Be aware that some companies out there might slack off and not produce quality results in a timely manner.
• It is best to choose a company who offers a wide array of products and materials to choose from. Be sure that they offer exactly what you are looking for! They should use quality products made from durable materials so you can be rest-assured that you and your family will be kept safe and protected.
• An added bonus of choosing a contractor is if their products are backed by warranties. This would allow you and your family to enjoy the home services for many years to come, and not be worried by product failures!
• The company’s roofing services and its customer service should not only meet your expectations, but exceed them as well!
• If you are concerned about your budget, which most of us are nowadays, you should choose a contractor who delivers the best roofing repair and installation services for your home at affordable prices. You can see if they offer specials on their services or discounts, too.
• Of utmost importance for some people is how long it takes for the contractor to typically complete the projects. If you can find a contractor who completes most projects within 1-2 days, you should choose them!
• When it’s all been said and done and the projects are completed, it is important to choose a contractor who will do a thorough cleanup so your home and property are as clean and beautiful as when they started.
• It is important to find a roofing company who offers a warranty on their labor.
• For your benefit, make sure their team members are well knowledgeable, and that they can answer any questions you have regarding the services and products they offer.

By keeping these qualities at the forefront of your mind, you can feel comfortable to choose a roofing company who is the best for you and your family’s needs.

[ad_2]

Source by Jeff Hopeck

[ad_1]

Error 1316 – it’s a big issue caused by the way in which your computer will be unable to process a file / setting that it requires to complete an installation procedure for your PC. Despite this error continually preventing 100’s of computers from being able to install applications each day, it’s fortunately a very simple issue to resolve. This tutorial is going to explain how to cure the error you’re seeing for good.

This error will typically show in this format:

• Error 1316. A network error occurred while attempting to read from the file F:data1.msi

The problem you’re seeing is basically that Windows is unable to correctly process a file / setting which it requires to complete an installation. The problem is that when your computer needs to install documents / settings that it needs to run, it will have to place a large number of files / settings into various folders that you will specify for your system. The issue is that a “Microsoft Installation File” (MSI file) that your isnstallation program requires cannot be used – leading your computer to run highly unreliably as a result.

The way to fix this error is to first ensure that the installation files / settings are working correctly. This can be done by first using the “Windows Installer Cleanup Utility” (a free download from Microsoft) to ensure that your computer’s files are working correctly, as well as then changing various registry settings which may be preventing the installation from occurring.

After that, it’s recommended you clean out the registry database of your computer by using a “registry cleaner” program. The registry is a central database which stores all the settings of Windows, and is used a lot whenever you try and install a program. Unfortunately, it may be the case that your system will have some sort of problem preventing it from being able to inset the settings required to complete the installation on your system, leading the 1316 error to appear. To fix this, you can resolve the problem by downloading & running a “registry cleaner” program to fix any of the errors your system may have inside the registry.

[ad_2]

Source by Greg Kahn

[ad_1]

Electrical installation courses provide you with the knowledge and information that you need to carry out your duties in an effective manner on a daily basis. Whether you are already an electrician looking to refresh your knowledge and update your skills or you have never worked in the electrical industry before, choosing the right training centre is what will determine whether you walk away with the knowledge you need along with certification, or whether you learn what you already know.

There are a number of benefits to completing an electrical installation course from on the job training to enjoying working in a respected professional. In addition to this, working within the electrical industry, you will enjoy career growth moving forward.

With the right training centre, you will be able to take the course, pass the test and then go to work and immediately start using the skills you learned, you will be able to fast track your own career and improve your own career prospects now and in the future.

The first step to taking any electrical installation course is to ensure that you are choosing a reputable and reliable training centre which is going to offer you the best training, knowledge and insider advice that you can use immediately in your chosen career. Remember that not all training centres are the same in terms of what they teach, the quality of their courses and their pricing structures.

You want to choose a centre with experienced instructors who only take smaller classes, so that they are able to focus on each learner to ensure you understand the course materials and that you pass your examination to receive your certification at the end. That certification can boost your career in the electrical industry and is your ticket to enjoying a successful career moving forward.

Ensure when it comes to something as important as electrical installation courses that you choose a learning centre which can provide you with the authentic City and Guilds course combined with accredited certification. These are industry recognised training courses and certifications, which ensures your course is respected by the industry.

Take a look at the courses offered by the training centre to identify that once you complete this course, what others do they have that you can take advantage of. Knowledge is key and if you keep improving your knowledge and skill set, you can boost your career, take advantage of promotional opportunities and enjoy a very successful career in the future.

The cost is often a big deciding factor, especially if you are paying for yourself to attend. If the company is paying, they will probably send a number of employees for a discounted rate. Investing in training is a worthwhile cause, you are investing in your future, but at the same time you do not have to break the bank.

Speak to the training centre you want to use to complete your electrical installation course to identify if they can provide you with the chance to pay off the training or if they offer discounted rates that you can afford. You may want to compare a few of the training centres you feel comfortable with, though always remember you want to get the best learning experience, even if you do have to pay slightly more in the long run.

The final step of taking any electrical installation course is to identify how long the course is and book time off to attend. These are not distance courses, you will have to complete the course in a learning centre, but when completed, you will have a new set of skills you can start using without delay.

[ad_2]

Source by Abby Fermont

[ad_1]

A television aerial installation is not an easy task and not everybody is qualified to do it. You cannot just climb up your roof and do your television installation. If you do so without any proper training or knowledge then you are putting yourself in a lot of risk. For your own safety, it is best to contact a professional for your television installation.

If you do not install television aerials for a living then it is best to contact a professional to install the aerial in your home. If you do it yourself then there is no assurance that you will be able to install it in a proper, fast and safe way. If you hire a professional for your aerial installation then you can be assured that your aerial will be installed in a quick, efficient and safe manner. A professional aerial installer has done installations so many times that it will take almost no time at all for him to do your television installation. If your aerial is installed efficiently then you will not be experiencing any problems later on such as blurred pictures or poor reception.

Television aerial installation companies may be experts when it comes to this task but it does not necessarily mean that they are expensive. Of course you have to pay for their services but it is not necessary for you to spend a lot of money for it. You can also be sure that you are getting the most out of your money. Their service is of the highest quality so you can be sure that your aerial is installed the right way. If you install your television yourself and you do it wrongly then you will end up having to hire a professional aerial installation service. If you hire a professional then they will install your aerial properly the first time so you no longer have to encounter any problems with your television reception. Television aerial installation companies only hire trained experts to do the installation so you can be assured that you get the best service. You are in fact paying a small price for their expert service.

If you hire a television service then you can have your aerial installed at the soonest possible time. They can send a crew for the television installation on the same day that you called or the next day at the latest. The installation is done very quickly so you do not have to wait long to enjoy your television. If you do it yourself then it may take hours before you get the job done that is if you get it right.

[ad_2]

Source by Aden Bragg

[ad_1]

The 25002 error is a typical problem that rears its head when you attempt to install / uninstall Norton or Alcohol on your computer. This error mostly occurs when your PC does not have the adequate permissions, or drivers to carry out the operations you are asking of it.

This error is mainly driven by the way in which Windows cannot process files and settings needed to run the system properly. The usual format of this error will show itself as:

• “Error 25002: Failed to load navinst.dll.”

The causes of this problem can be attributed to the way in which your computer cannot read the files or settings required for the installation/un-installation to take place. Typical examples of this problem will be when your user account does not have the correct permissions to run the file, or when you are experiencing file corruption issues with the “registry” of your system.

How To Fix The 25002 Error

Fixing the 25002 error is simple. The first step is to ensure you have the correct permissions on your system. Most software can only be installed and uninstalled by the user account that has the required rights to do so, e.g. the administrator. If you’re not logged in as the administrative user, log out and then log in again with the correct user account that has permission to install in your system.

The next step is to check if your Navinst95.dll or Navinstnt.dll file is damaged or corrupted in any way. If so, you have to repair any of the problems which are causing the errors by clicking “Start” and then selecting “Search”. After this you have to locate Navins95.dll and Navinst.dll and rename them both as “navinst.dll”. The third step is to fix any corrupted and unreliable settings inside your computer that are stored within the “registry” data house. These stored settings can establish how your computer is capable of installing a program correctly onto the hard drive. These registry errors can be resolved by clicking “Start” and then selecting “Run”. When a box shows up, type “regedit” and then press OK. Now, locate the following registry key when the Registry Editor window appears:

HKEY_LOCAL_MACHINESystem CurrentControlSetControlFileSystem.

The next thing to do is to double-click NtfsDisable8Dot3NameCreation in the right pane and then change the data in the Value data field from 1 to0. After, exit RegEdit and restart your PC. After that, install Symantec AntiVirus Corporate Edition client on your hard drive. When installation process is finished, change the value of NtfsDisable8Dot3NameCreation file back to 1.

The final step for resolving 25002 errors is to use a registry cleaner device. The registry is a major reasons for the 25002 error appearing, as it is the central database which stores all the vital settings and options that is required by Windows each time you use a program like Norton or Alcohol. It is responsible for storing your recent emails and files, including desktop wallpapers and the like. If you want to completely fix the errors appearing in your computer, you should clean through the registry by using a registry cleaner. There are quite a few programs available, but not all are equally effective. Therefore, only download one that has been recommended by professionals.

[ad_2]

Source by Greg Toddles James