Seamless Cellular Coverage With Repeaters
[ad_1]
Have you ever walked into your home or office while talking on the phone and had your call drop suddenly? Mobile “dead zones” are one of the most frustrating things that face today’s cellular users. Our phones have become a lifeline of sorts. We depend on our phone for emails, text message, internet, and most importantly voice service.
Dropped calls have plagued consumers for a number of years, starting from the very first brick phone installed in our cars. While the number of drop calls has fallen it still seems to happen more than anyone would like. Companies like Verizon, and AT&T have spent billions to upgrade their system of networks to prevent this single problem from happening.
Today, most calls are dropped not due to poor towers but poor signal penetrating building materials. Any building that has thick concrete walls or a significant amount of metal pan will completely block most cellular signals. Even some insulation can inhibit the transmission of these signals. Churches, large offices, and most warehouses will suffer from signal lost due to this reason. There are numerous other reasons you may have weak or poor signals but this is the most common in today’s world.
Cell phone repeaters were introduced to the market as a way for the consumer to take charge of poor signal strengths. Sometimes called cell phone amplifiers, these repeaters bring in the strong cellular signal outside and distribute that same strong signal inside via a series of antennas.
Some advantages, besides perfect signal, are an increase in your phone’s battery life. Cell phones use 300% more battery life searching for a signal than if it no longer had to. Less searching for signal also means less radiation is emitted by the phone itself.
When searching for a Cell Phone Repeater system be sure to verify that your product is approved by the Federal Communications Commission (FCC). Most products in the US already have this or are currently pending. Signal amplification is marketed as dB gain. Cheaper solutions will advertise a gain of 20dB – 50dB. While more expensive solutions over 50dB are a lot more likely to provide you a solution for your whole home or office. Solutions over 100dB are designed for large commercial facilities. Sadly the most common mistake that people make when buying a repeater system is not checking the load level and dB gain. Ordering a system that only provides a low level gain may only provide a boost in signal to 1 or 2 phones. Most larger gain systems will provide signal for strength for over 10 users at a time. Small offices should pay particular attention to this as it may be a large reason why you go with one solution over another.
While the market for cellular repeaters is booming in the US, it is important for you to choose a company that can design a custom system to fit your building’s needs. Most professional companies offer a money back guarantee and sell products built to last.
For more information please visit: http://www.SeamlessCellular.com
[ad_2]
Source by Walter Reynolds