/ By edd / spiral-freezers/ / 0 Comments

US Army FAQs – What Should I Take With Me To Basic Training?

[ad_1]

A common question that future soldiers ask is “What should I take with me to basic training”? It’s a topic that worries those who are shipping out to basic training and fear they will be in trouble for bringing contraband to base. To ease your doubts and frustration, I’ll explain what items you can take with you to boot camp.

Clothing

If you have read the official packing list on goarmy.com site, you would see that they require you to bring an extra set of clothes. To be honest, you will be issued new uniforms upon arriving to reception on the very first day and wear it till graduation day. However, it is advised that you take the clothes on your back and a comfortable pair of tennis shoes.

Documents

All you need is the certified original documents that you have given your recruiter. Those documents would be your birth certificate, social security card, certificates, identification card, marriage license, divorce decree, spouse and children documents and also have your direct deposit form. Either you or your recruiter will prepare your personal information into a manila folder so that you can give it to the reception battalion at BCT.

Technology

You can bring your electronic devices to boot camp such as an iPod, iPad, laptop, mp3 player and digital camera but expect those items to be locked away in storage. Only your cell phone is the authorized item to have and your drill sergeants will give them back from time to time when you earn privileges.

Miscellaneous

  • Small backpack that has neutral colors.
  • An inexpensive black wristwatch
  • A calling card to place calls using the phone booth. Only if you decide to not bring you cell phone.
  • An address book.
  • Stationary supplies such as a notebook, pen, envelopes and also postal stamps.

Personal Hygiene

If you believe that you can easily get dirty or smelly during your trip. It is advised that you carry a miniature hygiene kit that is acceptable within airline policies. You’ll find that it would have the most basic commodities such as a deodorant, a toothbrush, toothpaste, a comb, a razor and also shaving cream.

Cash

Nothing is free in basic training except the food, uniforms, and laundry and also housing. Otherwise, you have to pay for hygiene supplies and also haircuts which cost $7 dollars. To access your funds, you will need to take your debit card to withdraw money from your account. They have ATM machines located near the Post Exchange (PX) store so that you can be able to withdraw bills of twenties.

[ad_2]

Source by Gregory Warren

/ By edd / spiral-freezers/ / 0 Comments

How To Start A Realtor Sign Installation Business – Tips And Strategies

[ad_1]

When you start a Realtor sign installation business, you have access to a wide variety of potential business sources from residential to commercial to vacant land. You will also need to establish the geographical area that you can cover reliably.

In considering how to start a Realtor sign installation business, the first consideration has to be arranging for the production of signage materials. To print custom logos and colors you will need to set up arrangements with a silk screen printing company. This is a specialized process where the pattern is created on fabric with a resist material, then ink is pressed through in multiple color passes. You are also going to want to arrange for storage of the completed signs in a covered dry area with separators to protect their surface when not in use.

The signs themselves are almost universally mounted on four by four standard construction grade Douglas Fir posts, apart from larger commercial real estate signs which occasionally may require four by six posts. The plywood for lettering should be plywood with exterior grade glue and a smooth PTS “plugged and touch sanded” surface on both sides. Half inch thickness should suffice for most applications.

You will need a good knowledge of the area to accurately locate the sign placements. A GPS device is useful here, and you will also want to be able to read County Assessor plat maps if you are going to place signs on vacant land. You will also need to check local sign ordinances in developed areas. Know the restrictions on sign placement in gated communities, within homeowner association controlled developments, and in all areas with covenants, conditions and restrictions (CCRs) such as planned unit developments or town homes.

You also need to have reliable transportation consisting of a full size pickup truck with wood separator fixtures fashioned to secure the standard yard signs during transport.

Once your production capacity and storage arrangements are in place but not yet activated, you need to secure your accounts. In addition to marketing to conventional real estate offices, you will also want to pursue the bank REO (real estate owned) departments that need to liquidate foreclosed holdings and the independent agencies that are selling foreclosed properties in bulk.

Establish your pricing and service by comparison with sign companies in areas adjacent to your service area. Much of your marketing will be establishing contacts in person with the real estate office managers in your area. Be presentable, be persistent, be cordial, and be businesslike. These people need to know they can trust you to promptly and reliably place and remove their signs.

Almost every business today can benefit from an online marketing presence. A digital camera can provide you with promotional photographs for your web site, and templates are available online to simplify the process of setting up your site. Be sure to include a call to action on every page to encourage your visitors to request an estimate by e-mail. Also obtain their name and telephone in your online form to follow up with them consistently. The forms can be found by searching online for reply forms.

[ad_2]

Source by Daniel Dreifus

/ By edd / spiral-freezers/ / 0 Comments

Understanding Your Rights Under Florida’s Relocation Statute

[ad_1]

Relocating in the Midst of a Divorce?

When a husband and wife decide to divorce, but plan to reside in the same geographic area, it is fairly easy for a court to address the issue of custody by awarding equal, or substantial, timesharing.

However, this issue can become quite complex (and contentious) when one of the spouses wants to move a long distance away to a different part of Florida, or a different state entirely, and desire to take their child, or children, with them. When this situation arises, there is a specific statutory provision that governs how to award custody when one of the parents wants to relocate elsewhere.

Overview

When you or your soon-to-be-ex-spouse wants to move 50 or more miles away for 60 days or longer, the Florida relocation statute is triggered. The Florida relocation statute (i.e. Section 61.13001 of the Florida Statutes) governs parental relocation with a child. According to Section 61.13001 of the Florida Statutes, “relocation” is considered to be a change in the residence of a parent or other person from their principle place of residence (I) at the time the last order was entered establishing or modifying timesharing, or (ii) at the time the last pending action that established or modified timesharing.

Relocation Statute

The relocation statute was enacted by the Florida legislature in order prevent a party to a divorce making the unilateral decision to relocate. The party seeking to relocate to a different area with their child needs to file a Notice of Intent to Relocate with the court. The other party in the divorce proceeding has the right to file an objection.

If you or your soon-to-be-ex-spouse want to relocate to a different area, you need to present evidence to the court that proves, by a preponderance of the evidence, that relocating to another part of the state or to a different state is in the best interest of the child. If you, or your soon-to-be-ex-wife, can meet this burden of proof, the burden will then shift to the parent who is staying put. They will need to show, by a preponderance of the evidence, that the potential relocation is not in the best interest of their child. Once this argument is conveyed to the court, the judge will analyze the facts and enter a decision.

Relocating to a different part of Florida, or a different state, with your child without complying with the requirements of the relocation statute can result in the court levying harsh penalties. For example, the relocating party could be:

• Held in contempt of court

• Ordered to compel the return of the child

• Subject to significant modifications to the court’s time-sharing schedule

Have Questions about Relocation Rights? Contact an Experienced Custody Lawyer in Miami

If you or your soon-to-be-ex-spouse want to move to a different part of Florida or a different state, it is imperative to adhere to the specific protocols and requirements set forth in the relocation statute. One mistake or oversight could significantly impact your ability to relocate. Hence, it is in your best interest to consult with an experienced and reputable custody lawyer in Miami for the best outcome for all parties involved.

[ad_2]

Source by George N Anderson

/ By edd / spiral-freezers/ / 0 Comments

Important Questions To Ask Before Buying a Telehandler For Sale

[ad_1]

There are many industries that use telescopic handlers, or telehandlers, and when a manager is considering purchasing a telehandler, there are a variety of very important decisions that need to be made. For example, these telehandlers come in assorted sizes, and one of the most important decisions that needs to be made is in selecting one that is neither too large nor too small for the jobs to be done – the wrong size could result in a disaster for any job. The challenge is in purchasing the right telehandler that will efficiently and effectively perform to expectations.

Items to Consider

Certainly the manager has to consider the budget in purchasing a telehandler, but purchasing the least expensive model is rarely the best option; neither is buying the most expensive model. Therefore, there are a number of points to consider, such as:

· Identifying the assorted types of jobs that the telehandler needs to perform. This is important because the right attachments must be selected to do the job – securing the wrong attachment can also result in disaster. Have a list of the jobs to be done and the seller can help identify the attachments which are needed and are most efficient for the job at hand.

· Determining if the materials are to be transported from the ground to an upper floor or upper shelf, or just moved from one end of the location to another.

· Identifying the maximum weight that the telehandler would have to transport.

· Determining the height that the telehandler must be able to support – this identifies the length and height that the boom can reach.

· The size of the area where the telehandler will be utilized must be considered – purchasing one that is too large can result in a disaster and a waste of money. One that is too small will be inefficient and will be unable to perform the jobs at hand.

Trained Operators are Essential

The telescopic handler is an exceptional tool that requires specialized training. There are a variety of training courses that provide licenses and certification to ensure that the operators are fully capable of operating the telehandler with a variety of attachments – and most importantly understand the safety precautions that must be taken. Allowing just anyone to operate one of these machines can risk serious injuries or death to other workers and untold damage to property. Improper use of this large piece of equipment wastes a huge amount of money each year because of accidents by untrained operators.

A good telehandler operator has the following:

· Certification and license from an approved training company.

· Practice and experience in using an assortment of telehandlers and attachments.

· Solid understanding of the right telehandler and attachment to perform the job.

· Understanding the ramifications of structural damage or mechanical failures in the telehandler, and how to identify these flaws to prevent accidents.

· Understanding of limitations for reach, height, and weight capacities of the various telehandlers, their booms, and attachments.

Successful Purchase

When the exact telehandler and accessories are purchased to perform the job, and a licensed, experienced operator is hired, the telehandler will perform perfectly and be the ideal solution for the task.

[ad_2]

Source by Manisha Kumar

/ By edd / spiral-freezers/ / 0 Comments

The Role of Robotics In Metal Fabrication

[ad_1]

Robotics is a branch of engineering science that deals with robots and computer systems. Extensive research on the functionality and possible uses of robots was commenced in the 20th Century. One of the objectives of developing industrial robots was to improve the quality of manufacturing processes. The fact that robots can work in any environment makes them immensely useful in the manufacturing industry. Hazardous and complicated jobs such as metal fabrication, bomb defusal, exploring shipwrecks and mines can conveniently be performed by bots.

Robotic metal fabrication is a highly sophisticated and complicated technology that automates several manufacturing processes like welding, cladding, machining, and assembling. Working with metal fabrication equipment can be a dangerous task. An automated metal fabrication system minimizes the risk associated with human error and fatigue. Bots automate a series of production repetitive tasks including line configuration, loading, and unloading parts. Automating these tasks help manufacturers achieve a higher level of productivity and safety.

Robotic Machining

Industrial automation technology resolves many issues associated with machining applications. Industrial robots are considered ideal to carry out tasks where accuracy and consistency are of immense importance. They are contributing largely to the improvement of efficiency in machining processes. They have completely outsmarted the conventional machine tools.

Robotic Welding

Robotic welding, in simple words, is an automated process of welding two or more than two metal parts with the help of robots. Articulating and rectilinear are two common types of industrial welding robots. Articulating robot has an arm with rotating joints that work like a human arm. With rotational movements, a rectilinear robot moves in regular lines along X, Y, and Z axis. The best thing about these intelligent industrial devices is that they perform flawless welding in a range of sensitive applications such as automotive and aircraft components. Some of the advantages of automated welding are:

  • Reduction in capital and operating cost
  • Improved consistency and weld quality
  • Reduction in over welding, distortion, and gas consumption
  • Improvements in workplace safety
  • A bot can work for days continuously without showing physical fatigue and drawbacks.
  • Less space is required to install and operate automated industrial production units.

Robotic arc welding is another growing aspect of automated welding. Manufacturers use welding bots to fabricate a wide range of products from cars to airplanes in a fast and cost-effective manner.

Computers have improved the functionality, accuracy, and reliability of industrial automation devices and enable them to be the intelligent controllers of automation. The reason why industries are increasingly deploying automated manufacturing systems, in form of AI bots, is that bots can dramatically improve the productivity and product quality.

[ad_2]

Source by Basharat Khadim

/ By edd / spiral-freezers/ / 0 Comments

10 Services That Banks Offer

[ad_1]

Whenever we are looking for a particular bank product, we of course always want the best for ourselves. There are numerous services that banks offer. The following article intends to outline 10 of the principal services that banks offer and the reasons why we would want the best in each one… for ourselves!

Wanting the best for ourselves is especially true when we are looking for a means to entrust the safe keeping of our money. So where is the best place for your money? Give it to a friend? Put it in a piggy bank? Hide it in a particular place where only you know? Put it into a bank? Well these are some of the possible places and means wherein you can keep your money. But there is one thing that these ways have in common: they are all actually risky. They are all risky in the sense that the money you have entrusted to them are in danger of being spent, destroyed or will be worth less to you when you take the money back.

Of course, entrusting your money to a reliable and trusted bank is one of the most trusted ways to keep your money safe. Of course to do this, you have to open a savings account first before you are allowed to deposit your money with a bank.

Before opening a bank account, it is best practice to carry out thorough research about any prospective bank. If you think you are satisfied with your research and think that the bank you have chosen can meet all your business and personal needs, then this will be the time for you to enroll yourself and begin to make your deposits.

I Now Have A Bank Account!

Now, you and your money are already relatively safe and secure. I have to congratulate you for finding the best bank for you. However, I would like to reiterate here that all banks vary in the services they provide. A good example of the common services offered is the savings account. This is basically the initial service one can ever have when joining a bank. With regards to services, there are also some cases where some banks offer one type of service and others do not.

10 Services Offered By Banks

For you to have a clearer view of a bank’s services, I have included 10 of the services that most banks offer to consumer banking customers.

  1. Savings and other Accounts
  2. Online Banking
  3. Wire Services (includes customer care service)
  4. Payroll
  5. CDs
  6. Payments
  7. Collection
  8. Transfer of Funds
  9. Bill Payments
  10. Loans

[ad_2]

Source by Dave Cheeseman

/ By edd / spiral-freezers/ / 0 Comments

Food Processing Industry How Do They Make – Fish Sticks?

[ad_1]

This article is part of a series that will uncover the secrets of the Food Processing Industry and share with you the secrets of how your favorite food is made.

The first article in this series starts with the humble fish stick or fish finger. A childhood treat, and a adult favorite either on a plate with peas and chips or between to slices of white bread. BUT always served with Tomato Ketchup.

The Fish

The first component is the Fish, this is a frozen block about 2 ft by 1 ft by 3 inches. It is made from fish mince (cheaper end of the market) this tends to be all the left over pieces of fish. Or it can be made from whole fillets that are layered on top of each other(the expensive end of the market).

To be honest nutritionally there is not that much difference between the two. The type of fish can be COD for the expensive end or pollack for the cheaper sticks. These blocks are made within hours of the boat landing, which means the fish is about 6 hours old when it is frozen.

Making The Stick

Using a food processing band saw, skilled operators cut the block into slabs, then cut it again into fingers. The more expensive the thicker the finger the cheaper the thinner. Typical a good fish finger will be about 1cm thick, whereas the cheaper one can be 0.5 cm. These sticks are then separated and passed to the coating stage.

Adding the Breadcrumb

Similar to what you see in restaurants or TV shows, the fish is coated in a batter then breadcrumbs. BUT this is truly where the cheapness is added. If your buying cheap fish sticks they will add a layer of water, a layer of flour, a layer of batter, a layer of crumb. In the trade this is called a 4 pass and can add upto 70% bread crumb to the stick. This type can often be identified as it is extra crunchy and has almost no fish. The high end fish sticks will have a 3 pass system and often have fish contents around 60%.

So in your 300g packet of fish sticks you could have 90g fish (cheap) or 210g (expensive)

This whole process is carried out through a food processing production line of automatic coating machines. Typically a line can produce 100-200 fish fingers a minute.

Fry Time

Up to this point the fish stick is quite healthy with almost no fat….. However the stick passes through a industrial fryer that has hot oil . This makes the coating extra crunchy, this is due to the water in the coating being replaced with very hot oil. Typically all the water in the coating is replaced with Fat.

This means the more coating the more fat, now typically food processors use vegetable oil or rape oil. Neither of which has saturated fats

Frozen and sent to the freezer

Within 30 minutes of frying the product has been frozen, and grouped together to then be put into the food processing packaging machine before sending to the shops.

Considering the speed of the Fish freezing process and the Packaging process, you cant make a fish stick fresher if you tried.

Final Verdict

Fish Sticks or fish fingers, when compared to other coated products like chicken strips, are healthier, fresher and have fewer additives. So I would definitely put Fish sticks first before other coated products.

If I’m picking a Fish stick try to get ones which have a high fish content, this is typically shown as a % in the ingredient Declaration. This often means it is made with whole fish not mince and has a lower fat content.

The type of fish really doesn’t matter, some will argue that a cod fish finger is the best but be honest, you’re going to dip it in Ketchup. Once you have done that I doubt you can tell the difference, except that your wallet is a little less full.

Each week I plan to reveal how everyday food products are made.

[ad_2]

Source by Dan S Jensen

/ By edd / spiral-freezers/ / 0 Comments

Today’s Dremel Tools, Which One Is Right for Me?

[ad_1]

Dremel tools are made in America and have been a household name for generations. They have a reputation for being high-quality, versatile tools and have been popular with homeowners and hobbyists ever since the first Dremel rotary tool was introduced over 75 years ago.

The Dremel company has continually refined and perfected their products and now offers a line of rotary tools designed to serve a wide range of hobbies and around-the-house projects. Many businesses also find Dremel tools a great asset to complement to their standard-size saws, routers and sanders.

Choosing The Right Dremel Tool

The Dremel tool that is right for you will depend on the types of projects you want to do. So, to begin the process of choosing, think about what you want to do with the tool. Then try to imagine yourself completing one of your projects using the tool that you are considering. Does it feel right? Then you need to evaluate the accessories that come with the tool. Are all the bits that you’ll need included? You should also check to see if there is a kit that will save you money. Kits usually contain more bits and accessories than you think you will need. But, believe me, no matter which of Dremel’s tools you decide on, you’ll soon discover that your Dremel tool is even more useful than you imagined. There are over 200 attachments and accessories available making every Dremel tool extremely versatile.

While not all of Dremel’s attachments and accessories can be added to or used with every Dremel tool, there are always a variety of bits available for every tool. Bits for cutting woods, metals and plastics and for grinding, sanding, polishing, and routing. There are attachments for cutting circles, for cutting straight edges, for sharpening chain saws, for filing your dog’s nails and even for carving pumpkins. Then there is a whole raft of accessories such as a flexible shaft attachment, a multi-use vise, a project table, and multifunction work station to name a few. What you can do with a Dremel tool? The possibilities are endless.

The Dremel MultiTool System

This new multi-tool system evolved from the original Dremel rotary tool, the MultiPro. Today, you can choose from many different models, both battery driven and with cords, and all of these rotary tools are great for crafts and for your hobby projects. Most of these rotary tools are also well suited for many of the DIY jobs around the house. The MultiTool models include: The 200 Series, The 300 Series, The 4000, The 7700, The 8000, and the 8200. There are also other Dremel rotary tools designed especially for specific arts, crafts and hobbies.

The Dremel Trio

The Trio features 360 degree spiral cutting technology and plunge-cut ability and is a great tool for everyone involved in general hands on projects in and around the house. It is versatile, compact and lightweight. It makes quick and freehand cuts in wood, plastic, drywall, metal, and wall tile very easy to do. It’s great for craft and hobby projects too. Read all about the Trio and what you can do with it on my website, The Dremel Trio, and find out where to get the best online price.

The Dremel Multi-Max

The Multi-Max is an oscillating tool rather than a rotary tool. It’s the ideal tool to use for repairing, remodeling and or restoring around the house. Its quick change system allows you to adapt quickly to any situation using the wide variety of accessories available. It’s two batteries guarantee that it has more than enough endurance to tackle any light DIY job or hobby project. You’ll be able to read all about this versatile tool on my new website The Dremel Multi-Max – to be published soon.

Regardless of which Dremel tool you decide is the right tool for you, be assured you will be purchasing a very reliable and powerful tool. Each Dremel product has been ergonomically designed so your hands won’t get sore or cramped. Each tool has a soft-grip handle making it more comfortable to use and giving you more control while working on your projects.

[ad_2]

Source by Floyd Taylor

/ By edd / spiral-freezers/ / 0 Comments

Explore the Historic Castles in Wales

[ad_1]

It is not surprising to see majestic castles standing tall in many areas of Wales. These castles have stood as silent witnesses to the passage of time and the rich history of Wales. When you visit Wales and stay at the luxurious Wales holiday cottages, you must not miss going to the different castles in the country. Wales holiday cottages will put you within near distance to these historic places. Here are two of the great castles in Wales.

Bodelwyddan Castle

This beautiful Victorian Castle is located in Denbigshire and is a short drive away from your Wales holiday cottages. This beautiful Victorian Castle is set in 260 acres of formal gardens, parkland and natural woodland. It was built in the 15th century but was remodeled in the 1820s in the Gothic revival style. In the 1980s, the period rooms were restored to its magnificent glory and it now houses the artworks from the National Portrait Gallery, V&A and Royal Academy. The park has an adventure play area for the kids added on in 2011. You can also see the remains of rare practice trenches that date back to World War I and will take you back to all the horrors of war. The open parkland that surrounds the castle is ideal for games as well as picnics so you must bring a picnic basket prepared at your self-catering Wales holiday cottages. There are also formal gardens and a woodland walk that goes through an orchard, a butterfly glade and a bird hide.

There is a Victorian games room that you might want to try out and a garden maze if you have the time. You can enjoy having some tea and snacks at the tea room and buy some souvenirs at the gift shop before you leave. The Castle is open on different times during the year so it would be best to call their office and inquire for the schedule on the day that you want to go there. Admission fee is £6.60 for adults, £5.50 for seniors and students and £2.75 for children up to 16 years. Group rates and family tickets are available. Children below 5 years old and disabled visitor’s carer are free.

Conwy Castle

The Conwyn Castle stands majestically on a rock above the Conwy estuary. This dark stoned fortress has an authentic medieval look to it. Rising high above the backdrop of the spectacular Snowdonia skyline, this historic site continues to draw as much attention today as it did during its time. It was built between the years 1283 to 1289 at a cost of £15,000 which was the largest single sum that King Edward spent in building a castle. It was designed by King Edward’s popular military architect, James of St George and was a replacement for Deganwy Castle which was destroyed by Llywelyn the Last. Today, the Castle is a Scheduled Ancient Monument managed by Cadw and part of the World Heritage Site.

The castle is open daily from 9:30 a.m. to 5 p.m. on the 1st April to 31st June and 1st September to 31st October. From 1st July to 31st August, it is open 9:30 to 6 p.m. Monday to Saturday and 11 a.m. to 6 p.m. on Sunday. Admission fee is £4.80 for adults, £4.30 for seniors, students and children from 5 to 16 years while family tickets cost £13.90. Children below 5 years are free of charge.

[ad_2]

Source by Mary Godago

/ By edd / spiral-freezers/ / 0 Comments

Ireland Medical Device Registration

[ad_1]

The famous North Atlantic island is Ireland.Ireland is third largest island in Europe, North Atlantic. As compared it’s European neighbors Ireland is economically strong and in next few year medical equipment market will humbly finished. Ireland is one of the top the medical device exporters in Europe.

The medicines, healthcare diagnosis product, prevention, other product used in healthcare by providers and patients, in-vitro diagnostic (IVD) test kits, reagents, laboratory analyzers and related software, etc. is comes under the medical devices.

For Medical Device in Saudi Arabia the national regulatory authority agencies are responsible for the regulation.

  1. Health Products Regulatory Authority (HPRA) (formerly the Irish Medicines Board).
  2. European Medicines Agency (EMA).
  3. Environmental Protection Agency (EPA).

Health Products Regulatory Authority (HPRA):

It is an European authority body responsible for regulation and authorization for Medical Device.

European Medicines Agency (EMA):

Every single medicinal products for human utilize is derived from biotechnology and other high-technology processes must be centrally approved by the EMA.

Environmental Protection Agency (EPA):

In Ireland, for the implementation of regulations on the contained use or deliberate release of genetically modified organisms (GMOs), EPA is responsible.

Registration Procedure:

  • Step 1: Organization Registration
  • Step 2: Product Registration
  • Step 3: HPRA document verification

      • Step 1: Organization Registration:

      There are two way to registration:

      1st: Online Mode

      You can register for HPRA on their website with respective fees.

      2nd: Manual Mode

      In this case you need to download the form ‘Publication and Forms ‘section of http://www.hpra.ie then filled it and also attached required attachment and submit to HPRA.

      Step 2: Product Registration:

      The Product Registration is online process for that you have to go on https://access.medicaldevices.ie and login with the help registration id and password of HPRA. After that you have to fill all product related information and take print out of it.

      (Important note: Kindly provide Global Medical Device Nomenclature system (GMDN) for medical device which is to register during the registration. You can contact to GMDN agency through their contact details present in their website if GMDN is not available for particular device for nomenclature.)

      Documents attached:

      1. If you are the authorized representative making application on behalf of a manufacturer then you need “Notarized Letter of designation from the manufacturer. “
      2. Class wise document required:
        a.For Class I EC declaration of conformity and technical documentation (Reference Directive 93/42/EEC: Article 11(5) and Annex VII part 3 S.I. No. 252 of 1994: Article 7 and Schedule 7 )
        b.Custom-made general medical device Documentation A statement and documentation allowing an understanding of the design (Reference Directive 93/42/EEC: Article 11(6) and Annex VIII S.I. No. 252 of 1994: Article 15 and Schedule 8 )
        c.System or Procedure Packs Documentation EC declaration of conformity and technical documentation (Reference Directive 93/42/EEC: Article 12 S.I. No. 252 of 1994: Article 11 )
        d.Custom-made Active Implantable Documentation A statement and documentation allowing an understanding of the design (Reference Directive 90/385/EEC: Article 9(2) and Annex 6 I. No. 254 of 1994: Article (9)1 and Schedule)

      If you want to register your medical device for the European Market you fill free to contact us on info@operonstrategist.com and +91-9325283428. Also visit us on https://www.operonstrategist.com

      [ad_2]

      Source by Neha Deshpande