A Fascinating Sidebar On Debate Over "Canned Versus Fresh"

[ad_1]

Public attitudes toward the food we eat are constantly changing and evolving in unexpected ways. In an era of demanding jobs and 60-hour-a-week workweeks, we may rely more on frozen and canned foods than we wish. Canned foods also provide an extraordinary range of items that might otherwise be completely unavailable. You have probably seen expensive French paté in tins in your local supermarket, but did you know you could buy Reindeer Paté in a can? Well, you can indeed! And how zbout curried crickets? That too! As the Romans wisely said, “in matters of taste, there is no argument.”

The canning of foods long preceded freezing them. Canning was invented by a Frenchman hired by the Napoleonic Army to preserve for military cooks food for long marches and war campaigns, like Napoleon’s year-old invasion of Russia, which had a supply train miles long.

The concept was revolutionary at the time but is really quite simple: The idea is that you seal any food product that you want to preserve — whether soup, meat, vegetables, fruit — anything, really, in an airtight container made of metal or glass and then heat the contents to a sufficiently high temperature to destroy any living organisms, such as bacteria or mold spores, that may be present in the container.

Since the container is sealed airtight, once the heat treatment is completed the contents should remain “fresh” or at least edible and free of contamination, for months or years thereafter. These days, factory cans are so well made that leaks or cracks almost never occur. In the early days, welding was used to seal cans and leakage problems were more common.

In the eons since Napoleon we’ve become more sophisticated about fine-tuning the canning process. Vegetables, for example, that contain few natural acids, need to be sterilized at much higher temperatures, often with high-pressure steam, than acidic foods like fruits, tomatoes, or pickled products, which can be safely sterilized just by putting them in bath of ordinary boiling water. That’s because the natural acids present help polish off the unwanted germs.

So in today’s modern households, canned foods provide a convenient and cheap way of storing food longer-term without the expense of freezing or refrigeration. And because canning operations are large, mass-production enterprises, pound for pound canned products are often much cheaper than fresh alternatives in the supermarket. And those canned products have the added benefit that they can safely sit in your cupboard at room temperature for several years before you use them.

So much for the science of canning. But how about it’s cultural acceptance, especially by elite chefs and consumers of food? Despite the scientific progress, it would be very hard today to find a gourmet chef who would tout canned products as superior to fresh. Canned foods are almost always looked down upon, especially by elite cooks and connoisseurs of food.

Yet this was not always true. A century ago, Sarah M. Williamson, a San Francisco socialite and writer, highly regarded in California as a food expert in 1916 when she was 38 years old and at the peak influence as a popular newspaper writer, began a minor crusade in favor of using canned products for gourmet dining. Canning in those days, of course, was still relatively new, and it had taken off commercially in a major way in her native state of California, even then the agricultural market garden for the growing United States of America. Canning made it possible to double or triple the amount of produce the state could export.

Sarah Williamson wrote that she often heard her friends tell her that “I loathe canned goods — never use them, indeed I fear them.” But Sarah Williamson had a different perspective, and since she was a well-known authority on food, people listened.

“Thus I have hard many a housewife exclaim,” she wrote in 1916, referring to the quote above.

“But why ban canned products, especially in California, where the most delicious fruits, vegetables and meats come in cans? Wonderful dishes can be concocted from cans! People who have not experimented with canned goods, or who consider them unwholesome, make an enormous mistake. Most excellent meals can be gotten up from cans. With canned peas, beans (string) and asparagus, one can make a perfect salad, and the sliced canned tomatoes are also fine in salads.

“A can of oxtail soup,” Williamson added, “used for gravy stock metamorphoses a second day cut of meat into a stew or fancy roast that an epicure would enjoy. Tomato soup can also be used for gravy, either on hamburger steak or warmed over meat. The chili-tomato is nice on spaghetti or rice or ravioli. A Mexican dinner can be arranged in two seconds with canned tamales or enchiladas, the encased ones used for garnish; canned spaghetti and chili con carne. Then, with a salad of string beans and a little fresh lettuce, the dinner is a joy throughout. Canned sausages are always tasty, and can be combined in all sorts of ways with vegetables. Canned mushrooms may not be so good as fresh, but are tasty in sauces. A can of boned chicken with a can of mushrooms can be turned into a remarkable pie, with creamed gravy, and a biscuit crust.”

And so the use of canned goods in the First World War, which is about the time Williamson was writing, enjoyed something of a revival on the West Coats as a result of her widely disseminated writings about them.

In the near-century since, the argument over canning versus fresh has continued unabated, though with the introduction of high-quality, specialty food markets, especially in high-income urban areas, fresh food products continued to be prized by America’s elite foodies. But canned products aren’t going away, as a trip to any Krogers, Safeway or Albertsons will show you, and they continue to serve us well.

[ad_2]

Source by Francesca Salerno

How To Store Basil – Best Easy Ways to Freeze Fresh Basil

[ad_1]

Have you tried storing basil for the winter in a milk carton? This is just one of three good methods to store basil that are revealed below.

With the threat of frost, all garden basil must be harvested and then hopefully stored to be enjoyed during the cold months to come. Since basil has a high water content is cannot be dried like many other herbs as it will turn black and lose flavor. It will also turn black if chopped or bruised and exposed to air. Fortunately freezing basil works great.

Before describing the freezing methods, let’s digress briefly. If you are growing basil yourself, then hopefully you have been harvesting and pruning all season. Pruning makes the plants fuller and keeps them from going to seed which diminishes the leaf flavors. You can store basil keeping it fresh for up to two weeks by placing the branches in a vase and keeping them on the counter out of the sun.

So let’s get back to how to freeze basil. The first step for all three methods is to clean & dry the basil. First remove all leaves from the stems. If you are going to try out the second freezing method, then you will probably want to leave some of the buds intact. The stems should be discarded. Rinse the leaves thoroughly taking care not to bruise them. Finally you want to remove excess water from the leaves by using a salad spinner or laying them out on towels to dry.

The first and most common way to freeze basil is basically the start of a pesto sauce. You chop or puree the basil leaves with olive oil and a bit of salt in a food processor. Coating the basil pieces with oil protects them from air so they can maintain their color & flavor. Pour the puree into small air tight containers and add some extra olive oil on top. After defrosting the puree, re-process adding your favorite pesto ingredients.

The second method takes a little more time, but is still an easy way to freeze basil. This method keeps whole individual leaves or plant buds intact to use as garnish. Put prepared leaves & buds on trays in the freezer for about one to two hours. Once they are frozen, put them into air tight containers. Do not over crowd them; otherwise they will lose their shape. After defrosting for use, you can julienne the leaves or use them whole as garnish on pasta dishes or soups.

Now how about that milk carton? This third method is the easiest. Simply pack the leaves into a cleaned out milk carton with the top cut down. Seal the top closed. Use quart sized cartons & then put the sealed carton inside a Ziploc baggy to make it air tight. When you want to use the basil for cooking, cut off a slice of the carton & re-store the remainder as it was. The frozen leaves are great to use in sauces.

Hopefully you will try one (or all) of these easy ways to freeze basil. By taking time to store basil in the fall, you can enjoy the fresh basil flavors throughout the year. Happy cooking!

[ad_2]

Source by Alex Newmon

SunQuest 24RS – Product Review

[ad_1]

Tanning beds made by Wolff are the best in the business, ranging in number of bulbs, sizes, and models. They all meet the quality control standards of the company and each bed carries either an eighteen month or twenty-four month warranty. Residential tanning beds offer you the convenience of sunshine right in your own home that you can enjoy in private listening to music you like and relaxing as your turn golden brown. One of Wolff’s finest residential tanning beds is the SunQuest 24RS.

About The SunQuest 24RS

The SunQuest 24RS is one of Wolff’s finest creations. Made with 24, 100-watt Wolff lamps – 12 in the canopy and 12 in the bed – each is angled to provide you with the maximum rays possible to get a rich, golden tan. The bed comes with an optional SolarMax T IFT facial tanner if the customer wishes for it. The tanner has one 400 watt lamp. Each bed automatically comes with the protective canopy grid to allow more of the rays to reach the tanner and allow for a more level tan overall.

Like its sister 16-lamp SunQuest 16RS, the 24RS is in the unique and popular Bio-tech tunnel design. This design lays the tanner in the middle of the wide, curved bench, allowing the tanning rays to reach more skin area without hot or cool spots. The total tanning surface of this bed is seven foot, one of the biggest to be made. The lamps are staggered as well and the reflectors are made of special glossy aluminium.

Additional Features of the 24RS

Wolff’s SunQuest 24RS bed comes with the quick clip acrylic removal system on the canopy and bench, allowing for deeper cleaning of the acrylic and reflectors, and ease in changing your lamps. It has efficient choke ballasts, and it includes a redundant back-up timer in addition to the main digital timer, which is rated for twenty minutes maximum. It also comes with a super flow internal cooling system, and optional body cooling fan.

The SunQuest 24RS is best used in a room with at least eight foot by eight foot available. It requires a 220 volt dedicated circuit, twenty amp circuit breaker, and a twenty amp NEMA #6-20R rated receptacle for proper use.

SunQuest 24RS’s Warranty

The SunQuest 24RS tanning bed comes with Wolff’s eighteen month ‘Bronze Medal’ warranty. This warranty includes but is not limited to: eighteen months on parts, one year on acrylics, ninety days on lamps and starters, six months on labour and lifetime warranty from structural defects. If you are purchasing your tanning bed used, inquire about the warranty. Sometimes there is some of the warranty left on the bed and depending on where you purchase it from, an extended warranty may be available.

The SunQuest 24RS by Wolff prices at around $3,899.00. When using any tanning bed, always use the proper protective gear and recommended cleaning products to ensure safe tanning and maximum use of your residential equipment.

[ad_2]

Source by Robert Newsome

Advantages of Chest Freezers

[ad_1]

The two basic types of freezers used by most people are the upright and the chest freezer. One of the main choices for domestic needs is chest freezers because they are very practical. Although refrigerators have a freezer section that comes standard, for families with high volume needs to store frozen foods, this freezer section is not large enough. The same holds true for smaller families who like to take advantage of purchasing food in bulk to benefit from discount prices. Having the need to store additional food makes the chest freezer an excellent option. Smaller than the upright freezer, many of them can be stored in convenient locations right inside the kitchen or adjacent areas.

For many people, storing their freezer in the garage is the most convenient. In addition to convenience, they have other advantages that make them the sensible choice for storing frozen foods. Their efficiency rating ranks very high as one of the advantages. The energy efficiency for the leading models means that they are capable of staying very cold inside no matter if they are opened seldom or very often. When it comes to added storage space, they offer more space in a smaller unit because there’s no need to share shelves or with items that need to be kept at a different temperature.

Freezers can often be found at a more economical price than other types of freezers because they are more compact. A variety of compartments inside them make them perfect for storing different types of foods. In the summer, they are perfect for children who want regular access to frozen treats like ice cream and popsicles. They are also available in a variety of styles that are frost free, making them very low maintenance over their years of service.

The needs of a home play a great role in which advantages mean the most when it comes to a chest freezer. For homes where large amounts of food are consumed on a regular basis, having a chest freezer makes sense. And with great brand names like Beko, Electrolux, Whirlpool and Zanussi provide some of the best choices in energy efficient, low cost freezers that are a smart investment in having extra storage space for frozen foods of all kinds. Available in a variety of colours, chest freezers can help save food costs over the long run.

[ad_2]

Source by Jamie Francis

Role Of Food Service Consultants

[ad_1]

If you have ever received bad service in a restaurant, you know that it can be a sales killer for any restaurant business. However, if you desire to have your restaurant be among the better restaurants in town and you aspire to be the best in your niche, then, providing great service is one of the best ways to earn a strong reputation. And one person that can help you deliver great is a professional food service consultant. The professional food service consultant can advise and give you the guidance you on the proper service techniques for your concept and assist in training how to deliver great service.

Providing great service is complex and needs all departments to coordinate their training and to achieve great service. It effects each food service departments such as banqueting, catering, room service and kitchen. Good food and beverage managers learn how to organize each of these departments to achieve great service.

Providing great service in hotels is even more complicated because there are so many departments involved. Every department imaginable including housekeeping, human resources and purchasing can have an impact on service. Different types of hotels have different food service needs as well. Little wonder that providing great service is so complicated. Food service consultants are the experts who know exactly what is needed by different restaurants.

Food service consultants play an active role in recipe development. They take on a number of services like:

– Development of food products

– Compilation and preparation of recipes

– Developing new ideas for recipes

– Innovating new product range

– Product management from planning to cooking and presentation

– Analyses of the market

– Analyses of competitors

– Recipe development

– Menu development advice and planning

– Catering

– Product tasting and evaluation

– Food styling and presentation

– Food recommendations

In addition to the above, food service consultants also focus on the nutritive value of foods so that the restaurant can serve foods that appeal to a large number of customers. Food consultants can even provide food specific nutrient analysis to show the exact number of calories, protein, carbs and vitamins in particular foods. This is important as many people are becoming more health conscious. A well trained food consultant can help you modify your recipes so that they are flavorful, visually appealing and nutritious.

Along with recipe development, good food consultants also can support the training of your people.

Therefore, if your restaurant business seems to be lagging behind and you just don’t know what to do, consider contacting a professional food consultant to assist in supporting your needs. You could also depend on food and beverage consultants to produce attractive pictures and sales materials for the restaurant.

Great food and service is an integral component to your restaurant business. A restaurant with excellent food service is the foundation for popular.

[ad_2]

Source by Alice M Shown

Refrigeration Maintenance, Walk-In Coolers and Freezers

[ad_1]

Most refrigerators and walk-ins seem virtually indestructible and problem free, but you’ll get longer life out of yours by following these safety and maintenance tips. Clean the door gaskets and hinges regularly. The door gaskets, made of rubber, can rot more easily if they are caked with food or grime, which weakens their sealing properties. They can be safely cleaned with a solution of baking soda and warm water. Hinges can be rubbed with a bit of petroleum jelly to keep them working well. Dirty coils force the refrigerator to run hotter, which shortens the life of the compressor motor. They should be cleaned every 90 days, preferably with an industrial-strength vacuum cleaner.

Walk-in floors can be damp-mopped but should never be hosed out. Too much water can get into the seals between the floor panels and damage the insulation. A refrigerator only works as well as the air that’s allowed to circulate around its contents. Cramming food containers together so there’s not a spare inch of space around them doesn’t help. Also try to keep containers (especially cardboard ones) from touching the walls of the cabinet. They may freeze and stick to the walls, damaging both product and wall. Use a good rotation system: First in, first out (FIFO) is preferable. Or put colored dots on food packages, a different color for each day of the week, so everyone in your kitchen knows how long each item has been in the fridge.

WALK-IN COOLERS AND FREEZERS

A walk-in cooler is just what its name implies: a cooler big enough to walk into. It can be as small as a closet or as large as a good-size room, but its primary purpose is to provide refrigerated storage for large quantities of food in a central area. Experts suggest that your operation needs a walk-in when its refrigeration needs exceed 80 cubic feet, or if you serve more than 250 meals per day. Once again, you’ll need to determine how much you need to store, what sizes of containers the storage space must accommodate, and the maximum quantity of goods you’ll want to have on hand. The only way to use walk-in space wisely is to equip it with shelves, organized in sections. Exactly how much square footage do you need? The easiest formula is to calculate 1 to 1.5 cubic feet of walk-in storage for every meal you serve per day. Another basic calculation: Take the total number of linear feet of shelving you’ve decided you will need (A), and divide it by the number of shelves (B) you can put in each section.

This will give you the number of linear feet per section (C). To this number (C), add 40 to 50 percent (1.40 or 1.50) to cover “overflow”-volume increases, wasted space, and bulky items or loose product. This will give you an estimate of the total linear footage (D) needed. However, linear footage is not enough. Because shelves are three dimensional, you must calculate square footage. So multiply (D) by the depth of each shelf (E) to obtain the total square footage amount (F). Finally, double the (F) figure, to compensate for aisle space. Roughly half of walk-in cooler space is aisle space. Another popular formula is to calculate that, for every 28 to 30 pounds of food you’ll store, you will need 1 cubic foot of space. When you get that figure, multiply it by 2.5. (The factor 2.5 means only 40 percent of your walk-in will be used as storage space; the other 60 percent is aisles and space between products.)

The result is the size of the refrigerated storage area you will need. For a walk-in freezer, simply divide your walk-in refrigerator space by two. Larger kitchens, which serve more than 400 meals a day, may need as many as three walk-in refrigerators for different temperature needs: one for produce (41 degrees Fahrenheit), one for meats and fish (33 to 38 degrees Fahrenheit), and one for dairy products (32 to 41 degrees Fahrenheit). The walk-in is used most often to store bulk foods. Because this often means wheeling carts or dollies in and out, the floor should be level with the kitchen floor.

This leveling is achieved by the use of strips (called screeds) that are applied to the floor. Coolers don’t come as a single unit; they are constructed on-site. The walls, ceilings, and floors are made of individual panels. Wall panels should be insulated to a rating of R-30, which means a 4-inch thickness. They come in various lengths and widths, with 12-by-12-inch corner panels at 90-degree angles. They can be as short as 71?2 feet or as tall as 131?2 feet. The most common type of insulation inside the panels is polyurethane, and the outside walls of the panels can be made of stainless steel, vinyl, or aluminum. Stainless steel is the most expensive, and aluminum-because it’s the least expensive-is the most popular choice. If the walk-in is an outdoor installation, aluminum is the most weather resistant.

The installer will be sure the unit has interior lighting. The floor panels for walk-ins are similar to the wall panels. Load capacities of 600 pounds per square foot are the norm, but if you plan to store very heavy items (like beer kegs), a reinforced floor can be purchased with a load capacity of up to 1000 pounds per square foot. The refrigeration system of a walk-in is a more complex installation than a standard refrigerator, primarily because it’s so much bigger. Matching the system (and its power requirements) with the dimensions of the walk-in and its projected use is best left to professionals, but it’s important to note that a walk-in accessed frequently throughout the day will require a compressor with greater horsepower to maintain its interior temperature than one that is accessed seldom.

A 9-foot-square walk-in would need at least a 2-horsepower compressor. The condenser unit is located either on top of the walk-in (directly above the evaporator) or up to 25 feet away, with lines connecting it to the walk-in. The latter, for obvious reasons, is known as a remote system, and is necessary for larger-than-normal condensing units with capacities of up to 7.5 horsepower. In a remote system, the refrigerant must be added at the time of installation. For smaller walk-ins, there’s also a plumbing configuration called a quick-couple system, which is shipped from the factory fully charged with refrigerant. This definitely simplifies installation. However, you may need the added power of a remote system if your kitchen has any of these drains on the walk-in’s cooling ability: frequent door opening, glass display doors, multiple doors per compartment, or an ambient kitchen temperature that’s near 90 degrees Fahrenheit.

Modern walk-ins sometimes offer a frozen-food section in addition to the regular cooler space. There are pros and cons to this concept. It may ease the load on the freezer, because it’s already located inside a chilled airspace; but it also can’t help but reduce overall usable space, because it requires a separate door. You can also order your walk-in with a separate, reach-in section that has its own door and shelves. Although this may save the cost of purchasing a separate reach-in, some critics claim that a walk-in is not designed to do a reach-in job, such as storing uncovered desserts. Do you really want them in the same environment as cartons of lettuce and other bulk storage items? There may be cleanliness or food quality factors to consider.

The doors should open out, not into the cooler itself. The standard door opening is 34 by 78 inches. Several door features are important for proper walk-in operation. These include: A heavy-duty door closer. Self-closing, cam-lift door hinges. If the door can be opened past a 90-degree angle, the cam will hold it open. A heavy-duty stainless steel threshold. This is installed over the galvanized channel of the door frame. A pull-type door handle, with both a cylinder door lock and room to use a separate padlock if necessary. Pressure-sensitive vents, which prevent vacuum buildup when opening and closing the door. An interior safety release so no one can be (accidentally or otherwise) locked inside the cooler.

Other smart features that can be ordered for walk-ins are: A thermometer (designed for outdoor use, but mounted inside the cooler) with a range of 40 to 60 degrees Fahrenheit. A monitoring and recording system that keeps a printout of refrigeration temperature or downloads to a computer. Glass, full-length door panels (like those in supermarkets and convenience stores), sometimes called merchandising doors, either hinged or sliding. Heavy-duty plastic strip curtains inside the door. (One manufacturer claims a 40 percent energy savings with this feature.)

A foot treadle, which enables you to open the door by pressing on a pedal or lever with your foot when both hands are full. Three-way interior lighting, which can be turned on from outside or inside the cooler, with a light-on indicator light outside. Inside, the light itself should be a vapor-proof bulb with an unbreakable globe and shield. When space is at a premium, think about whether it is practical to install an outdoor walk-in unit. This is an economical way to add space without increasing the size of your kitchen, and you can purchase ready-to-use, stand-alone structures with electricity and refrigeration systems in place. They come in standard sizes from 8 to 12 feet wide and up to 50 feet in length, in 1-foot increments.

They range in height from 7.5 to 9.5 feet. Look for a unit with a slanted, weatherproof roof, a weather hood, and a fully insulated floor. Outdoor walk-ins cost about half of the price of installing an indoor kitchen walk-in, so this is a money-saving idea if it works in your location. If your demands for walk-in space are seasonal, consider leasing a refrigerated trailer, available in most metropolitan areas on a weekly or monthly basis. They can provide an instant 2000 cubic feet of additional storage space, which can be kept at any temperature from 40 to 80 degrees Fahrenheit. They use basic 60-amp, 230-volt, three-phase electricity. Ask if the lease agreement includes hookup at your site and service if anything goes wrong.

[ad_2]

Source by Franco Zinzi

Freezer Spells

[ad_1]

For the most part, I think that spells can be a valuable way to “act” out your anger, resentment, bitterness or jealousy. The very act of doing a spell can make a person who feels powerless or victimized, feel at least briefly, for at time that they are somehow in control of the situation again. I have found the following “freezer” spells to be quite satisfying to do, if you find yourself somehow dumped, oppressed or just plain wishing for some kind of psychological torture to stop. I am not completely sure if these spells or not, but when someone does me wrong, the first thing that pops into mind is the frosty insides of my refrigerator.

I love these spells because they fall under the category of corny spells, trailer trash wiccanary and because they originate from such an emotional, passionate and old style of witchcraft. Yet at the same time they are very modern because they make use of the fridge. Technically too, they fall under the category of black magic because they are revenge spells, and represent the desire to control another person.

Being somewhat of a collector and connoisseur of corny spells, trailer trash wiccanary and any ritual that allows you to “act out your feelings” without necessarily hurting anyone, I thought I’d share them with you because they are a few of my favourites. Some of them have been sourced from Lexa Rosean, author of the Supermarket Sorceress who is a master of Kitchen Witchery. Still I think the important thing about a freezer spell is to start with the basics and then make it your own. I know one natural witch, (a famous Canadian singer in fact) who knows nothing about freezer spells, yet every time she gets mad at someone, she writes their name on a little piece of paper, twists it up and throws it in the freezer to “make it stop!” I discovered this one day when I was groping through her freezer for some ice cream and a flutter of little pieces of paper fell out to the floor. When I asked her about it, she told me her intuition had told her to put the people “on ice.”

The essence of a freezer spell is about time. The idea is to stop something in its tracks. Freezer spells also fall into the category of binding spells, as often their purpose is to paralyse an offender. They are used for protection, but mainly for REVENGE! Here are a few of my favourites.

THE BASIC ICE CUBE TRAY SPELL: This is all-purpose and what I like about it is that you can use magical ingredients to sweeten or sour the mix before you chuck it in the freezer. Basically, you take twelve small pieces of paper and write down the names twelve people or situations who have not been very nice to you or who have irked you or done you wrong. Think of twelve people who have been hostile to you, or who have a bad attitude towards you or who have behaved as obstacles to what you want in your life or career. Now stick these twelve pieces of paper in the ice cube tray compartments and add a little sugar, or honey to sweeten up their attitude towards you.

You could also add a few other things as well if you wanted – a little dill or parsley powder for improved communication, orange water for joy or rose water to increase loving vibrations. Then you fill the rest of the tray with water and stick in the freezer. I like this spell because it is relatively innocent and is persuading others to think of you kindly and not to harm you. A more vengeful version of this spell would be to add substances like vinegar (to sour their experiences) cigarette ashes (to cause depression) or horseradish (to cause arguments.)

If your resentment is directed towards a particular individual, perhaps a male who has dumped you for some one else you might consider doing this IMPOTENCE spell. While shopping for the cucumber at your local vegetable store, try and find one that resembles your ex-partner’s actual member when it is erect. At the very least this will get you giggling. Then carve his name and his birth-date into the flesh of the cucumber and throw it into the freezer. It will start to go soft and wither after a few weeks, and while this happens, imagine him and the sweet young thing that he betrayed you having conversations like “I swear this has never happened to me before.” “It’s ok. I understand.”

The ultimate freezer spell however, in terms of sheer nastiness, is this BREAK THEM UP freezer spell in which you write the offending couple’s names on a piece of paper (if you don’t know the name of the person coming between you write “unknown rival”) You put the pieces of paper in a Tupperware container along with a piece of rotten fish, fill it with water and freeze it. Fish are symbols of fertility and happiness, so the ultimate purpose of this ritual is to have the two lovers become turned off from each other. One person, who tried this spell, told me she laughed her head off, when her boyfriend came back to her and complained that his new lover had terrible B.O. I haven’t tried this one myself, but she says it worked. Lexa Rosean also boasts success with this one.

I can’t guarantee these spells work, but if you are too chicken to enact some real revenge (like turn the person into the I.R.S.) these little rituals at least satisfy a desire for “petty revenge”.

[ad_2]

Source by Samantha Stevens

The Benefits of Procurement Training

[ad_1]

Over the past few years, the recognition of procurement training has significantly increased. Current trends in the corporate world have enlarged the status of purchasing departments at most of the institutions. In order to survive in the growing competitive market with nonstop improvement on a daily basis, it is impossible for the organizations to just focus on cutting down on costs.

Procurement training is a very popular type of course that is being taken by students and professionals these days. The term also refers to purchasing or buying. This training also helps widen career prospects but it is vital to have a few additional skills too.

The more you save money, the more you gain; this is the motto of every corporate sector. This theory in turns builds immense pressure on the procurement department. However, the pressure is of ensuring superior quality products and services at a low price in order to receive or deliver maximum return.

The basic requirement for employees with this professional training has significantly increased over the years. An organization requires an efficient individual who is not only professionally qualified but also an individual who can provide a wide range of amenities and services to curtail business costs. Plainly, it is used to represent purchasing action on behalf of a business or organization. Given below are three different stages of this management process.

  1. Basic Data Processing
  2. Procurement analysis; and
  3. Management

Basic Data Processing is an essential part of this learning process. There is an enormous majority of this learning course which is completed by utilizing computer software programs. It is available at the community and career institution level. The entire procedure is focused on a particular software program or general enough to be applied to the most commonly used products.

Procurement analysis is accessible through different prospects like professional academies, colleges and different institutions. It is used to determine where the company or institutions can save money or develop individual business procedure. Thus, the main concept used in this type of guidance ensures with data management, statistics, data cubes and many more. Most importantly, all these abilities are utilized for any other type of data management or analysis programs.

This management program incorporates both analysis and financial reporting. The program is required for a main position in a board which is typically a post graduate program or certificate. Basically, this one year program offers some extra business functions.

What Are the Useful Factors of Procurement Training?

Along with the other amenities, the course offers some particular management skills, moulding together recent and industry concepts which provide an advanced level skill set. It is a very crucial consideration for stake owners who are looking to capitalize on their investments. At the same time, they want to create a more efficient cash flow system when purchasing marketable items. There are some extra benefits of this advanced education.

  1. A possible decline in the cost of materials and services from improved efficiency.
  2. You can earn self-reliance from purchasing executives to contribute in considered objectives.
  3. Superior interpersonal skills resulting in a great team work environment.
  4. It helps increasing the potential to help other employees with self-leadership skills.
  5. Helps in improving the relationship between a contractor and a supplier which is very important.
  6. Sometimes, supervision is not the only answer for an expert as they know well how to perform their job.
  7. Specialized experts can show better performance by making the most favorable and best utilization of the materials, equipment and other resources offered to them.

Nevertheless, in big organizations, the employees who are responsible for processing purchase requisitions or purchase orders are actually required to complete this program. Certainly, the procurement training is separated into three sections like internal procurement policy, finance obligations, as well as data quality. However, the policy is rather essential to avoid cost lawsuits and disputes.

[ad_2]

Source by Peter J Desilva

Beginner’s Guide to Car Audio Installation – DIY

[ad_1]

Speaker Positioning

Speaker installation is very critical for performance. Whether you spent $1000 or $10,000 on a set of speakers, if they are not properly installed, they would not sound as they should. Even though it may seem that the best position for most speakers are in the stock housing’s that came with the car e.g. on the door panel near your feet, this is just not so. You would see why such positions are still used however along with alternative solutions such as center channels for 5.1 dolby, LCD screen, in-dash DVD players. There are many factors that need to be considered in placing the speakers in the correct position.

Distance

The first thing to consider is distance. If the left speaker is only a couple feet away from your ears, while the right speaker is several feet away from you, then the sound will arrive at different times giving you poor sound. Since the left speaker is closer, it sounds louder. The best solution is to figure out a location where the difference between the distance of the right speaker to your ears and left speaker (also known as path length difference), are minimal. This is where kick panels become the preferred location.

Multiple Speaker Placement

If you have a system with two or more speakers per side, you need to try out different locations to obtain the best possible sound in your car. If you have a 2-way system with a tweeter and sub per side. The subs are mounted in the stock location at the bottom of the door. The tweeters are mounted high up on the front corner of the door panel. From the driver’s seat, you can see that there are 4 speakers all aimed towards different orientations and all at a different distance to your ears. This interaction of sound waves at different frequencies arriving at your ears at different times seldom sounds good. The best thing to do is to position the woofer and tweeter on each side as close as possible to each other. This is also why kick panels are used so much these days. Professional installers do use some tricks such as inverting the tweeters’ polarity when mounted for example on top of the dash while the woofers are low. Achieving good sound with unconventional mounting schemes is very, very hard and is only achieved after plenty of time has been spent trying different configurations.

Aiming

Our ears can distinguish the direction of sound more easily at higher frequencies. This means that aiming the mids, and most importantly, tweeters towards your ears play a critical role in sound imaging. Midbases are not so critical, but should be also aimed towards the listener’s ears if possible. To figure out the best aiming angle involves many hours -even days- of work. To start, try to aim the speakers towards the center of the car. Play around with different angles until you obtain the best sounding position. Subwoofers should be mounted up front for best sound. Since this is not possible in most cars, mounting subs in the back is not such a bad thing, since most people can’t distinguish where bass comes from. If you have good midbases going down to 60 Hz or less and subs picking up the signal below 60 Hz, then the bass will seem to come from the front.

Enclosures

Subwoofers need a properly designed enclosure to give top performance. Midbases and mids also do sound much better if they are installed in enclosures. The best sounding and easier to build enclosure type for midbases and mids is sealed.

Mounting Speakers

If you are using speakers that fit into the stock location, make sure there are no spaces or holes. Sometimes building a wood or fiberglass baffle helps reduce holes and gives you much better sound. Always be careful when using power tools around speakers. Holes in speakers usually are not covered by the warranty. For unconventional speaker locations, sometimes metal has to be cut. If you have the resources, plasma cutters and pneumatics tools work great. For most of us that do not have these tools, a pair of metal snips (left and right cut) will do the job.

Take your time to plan your system and dont just buy brand and product for the sake of popularity. Sometimes the simplest system is the most effective.

[ad_2]

Source by Duane Boodasingh

Material Handling Equipment: Increase Efficiency and Reduce Fatalities

[ad_1]

A majority of all industrial occupations involve overexertion that invariably leads to accidents and hazards. Handling and storing materials in different industries involve diverse operations such as hoisting tons of steel with a crane; driving a truck loaded with concrete blocks; carrying bags or materials manually; and stacking palletized bricks or other materials such as drums, barrels, kegs, and lumber. A survey reveals that an estimated 30 percent of the workforce is exposed to the hazard of lifting everyday. Materials handling equipment are an essential solution for reducing the risk of physical injuries for employees at work place.

Manual material handling implies unaided moving of objects, which often leads to twisted and awkward postures resulting in musculoskeletal disorders. Moreover, with the increase in the female population at workplaces and a generally older workforce, risk of injuries due to manual material handling has certainly increased. Having the right material handling equipment has become essential for a smooth and efficient workflow and high productivity.

Material Handling Equipment can be custom built in any shape or form to suit any application. Material handling equipment is used to transport, stack, recover and feed bulk materials. The concept of material handling equipment is to provide bulk material handling solutions to industries worldwide. Rollers, belts and chains are among the items that can be incorporated into a custom-built piece of material handling equipment. A variety of hydraulic and electric drives are also available. Every piece of equipment is ruggedly constructed for many years of operation.

The perfect choice of material handling equipment and good design of the material handling system and facility layout can increase productivity and reduce investments and operations’ costs. When deciding what material handling equipment to use, it is important to take into account the general characteristics of the equipment types available in the market.

Among the major materials handling equipment are Conveyors, Stackers, Reclaimers and Hoppers. Conveyors often referred to as conveyor belts are made of two end pulleys with a continuous loop of rotating material feeding through them. Conveyors are used to transport materials such as coal, ores and grains. Stackers are another form of material handling equipment used to stack bulk material onto a stockpile. Reclaimers work closely with stackers. Reclaimers are used to recover bulk material that has been placed in a stockpile. Hoppers are also a type of material handling equipment. Hoppers help to feed bulk materials into other machines.

Material handling equipment is undoubtedly the best solution to improve productivity while reducing the potential of workplace injury. Versatility, reliability, state-of-the-art technology and superior execution are making modern material handling equipment an utmost necessity for a variety of industries. Reduce the total amount of required manual material handling and minimize the hazards associated with these activities by creating a unified material handling system making the right material handling equipment selection. Reduce costs and improve efficiency in industrial material handling by providing the perfect selection of material handling equipment.

[ad_2]

Source by Christine Macguire