What You Need to Know About Your Furnace Air Filters

[ad_1]

Replacing or cleaning furnace filters is a simple enough task, but do you know how your air system’s filter really works to benefit you?

Furnace air filters are used in both heating and air conditioning units to maintain proper air flow and to collect and deposit any unwanted air particles that you do not in the air you breathe. Air filters help to control not only the airflow filtration, but also play a part in controlling temperature within and without the system itself, allowing for cost saving, efficient and safe use.

Now that you know what your furnace filtration system does, you need to also understand the importance of cleaning your furnace filters on a regular basis.

Furnace air filters are one of the simplest necessary household appliance maintenance jobs that you can undertake. Not only is it easy to do, but very important to the health and comfort in your family home. Your filters must be changed (or cleaned if not disposable) at least once a month. This is not optional, but mandatory for the proper performance of your heating or cooling system. Neglecting to do so, can cause several severe problems. One of these problems is that your furnace system may completely quit working due to filter blockage.

If a complete breakdown is not in order, a severely clogged furnace filter will at the very least discontinue its air filtering service and pass through all of the fumes, dirt, and irritants that it was supposed to filter out, possibly posing a health risk to yourself or even those you love.

Taking the 10 minutes it requires to replace dirty filters with clean ones monthly, has several benefits. It is not all doom and gloom. You can save anywhere from 5-10% on your monthly utility bills through proper maintenance. If you live where winter and cold are seasonal (or even year-round) regularities, then the amount of money you save increases considerably. Using an electrostatic furnace filter will save you even more money. This is because these filters use electrostatic technology, in other words static electricity, to attract dust particles in the air. This technology results in less stress on your furnace and thus lower utility bills. In addition this type of filter is washable which will save you money on disposable filters.

I cannot impress enough that maintaining a clean and clog free heater air filtration system is one of the best ways to lower your monthly utility bills, ensure fresh air in the home, and avoid respiratory health related issues.

Make sure that your furnace filters are free of any kinds of microscopic bugs, viruses, pollen, dust, mites, etc., which could get lodged within the net of the filters. This is especially important if you live in a crowded, polluted city. You should always check your filters at least once a month. If pollution, pollen, or urban dust are a big problems in your surrounding area, then a more frequent service schedule might be needed. If you are unsure, check. You can never clean your filtration system too often, and the dangers of neglect can be costly.

[ad_2]

Source by Howard W. Kingsbridge

Inexpensive Rubber Stamp Storage Ideas

[ad_1]

Rubber stamping is a fun and engrossing past-time, and like many hobbies, benefits from organizing your tools and supplies. Many organizational tools can be low-cost, as well as effective. Here are some handy tips to keep your rubber stamps stored safely and organized carefully.

One of the most important things with rubber stamps is keeping them out of direct sunlight. The rubber will degrade over time, and the stamp image will become less clear and crisp. The sun’s rays will cause the rubber to crack and dry out. You also want to avoid excessive humidity. Ideally, you should keep your stamps in a cool, dry place, without excessive temperature changes.

Mounted and unmounted rubber stamps should be stored separately, which will help you find what you are looking for easier. Unmounted stamps can be stored in flat, thin containers, like CD cases. To store in a CD case, just use EZ mount to stick your stamps to the inside of the case. You can then label the spine and the front of the case for easy filing. Another storage idea for unmounted stamps is to store them in a photo box on card stock. Attach Velcro to the card stock and place your stamps on the Velcro on one side of the card stock, and have the image on the front of the card stock, making it easy to flip through and find the appropriate stamp.

With wood mounted stamps, you may want to store them on a rack, which makes for space-saving and convenient storage. While there is a variety of ready made storage racks and cabinets, you can easily make your own. A cassette tape rack can be an effective stamp holder and organizer. You may need to create more space for each stamp by breaking off every other rung so your stamps will fit properly. Another inexpensive rack idea is using the side of an old baby’s crib, the kind that has wooden slats. If you turn the crib on its end and remove any hardware, you will have shelves that can easily hold your stamps that are wood mounted, just install it to the wall.

If your short on time, you may want to consider purchasing pre-made stamp holders and racks, but, with a little creativity, you can easily make your own inexpensive racks and displays for your stamps and your stamping materials. As long as you can easily find what you are looking for, and have protected your stamps from the extremes of heat and humidity, then your organizational system works!

[ad_2]

Source by Amy Wells

What Are the Features of an Advanced Carpet Cleaner?

[ad_1]

Advanced carpet cleaners are in high demand. More and more people are interested in replacing their old cleaners with advanced ones endowed with special features and modern technology. Traditional cleaning was limited to removing dirt and dust but the new age cleaning carpet machines are programmed to beautify and brighten the carpets making them as new as possible. Traditional carpet cleaning was aimed at mere cleaning but at present carpet cleaners focus on cleaning as well as improving the durability and age of our exotic carpets.

Hot water extraction or steam cleaning is the most popular technology employed by advanced cleaning carpet systems. Nevertheless, other systems are also upgraded with futuristic changes and they possess their own merits. Besides the technology, the fundamentals of cleansing have also undergone modernization. Cleaning carpet chemicals produced in our contemporary hygiene industry are more reactive than ever. Some of the best formulas featured by these advanced cleaners include green carpet cleaning solutions and encapsulated dry-cleaning technique.

Usually steam based carpet cleaners require 15 minutes to heat up. However, advanced cleaners incorporate dual heating elements that speed up the entire process reducing the heating time by 2/3rd of the conventional standards. Now, you don’t have to postpone your cleaning carpet task just because you are in a hurry. You can adjust the pressure levels to intensify and accelerate the cleaning process. With pressure limits as high as 500 psi, you can enjoy swift removal of all sorts of stubborn stains within a matter of minutes.

Traditional carpet cleaning systems required 15 to 20 hours for the carpets to dry up. This caused lot of inconveniences to the users. Modern manufacturers have adequately identified and eliminated this issue. New cleaners employ low-flow technology that allows the carpets to dry in less than 6 hours. The technology is a combination of three features that includes high temperatures, powerful extraction, and minimal water usage. The cleaning is done after considering the above three factors that allows thorough cleansing and quick drying.

Most of the manufactures are building cleaners equipped with eco friendly cleaning techniques and tools. The concept of green cleaning carpet was developed in the same lines. The solutions used for scrubbing the dirt off the carpet are made of organic raw materials that are plant based.

In the earlier days, carpet cleaning was considered as a chore and it took lot of time to haul the heavy machine from one room to another. At present you won’t find such bulky cleaners anymore. Modern cleaning machines are more compact and more transportable. Different companies compete with each other on the basis of such features that increase utility and comfort. With the introduction of portable cleaners, demand for these machines increased considerably. These handy and compact devices can be transported from one place to another without any apparent discomfort. This has also facilitated easy handling of the entire cleaning session.

[ad_2]

Source by Mary Y Thomas

Dry Penis Skin: Connected to Liver Health?

[ad_1]

Some doctors believe that the penis is a barometer of a man’s overall health and that issues that affect the penis – such as chronically dry penis skin – should be looked at to see if they indicate any larger problems. With this in mind, is it possible that something like dry penis skin could give a clue as to how healthy another body part is – such as perhaps the liver? It’s interesting to think, and important to note, that paying attention to penis health could have benefits beyond the pleasure one derives from the penis at play.

Why should there be a connection between the state of one’s penis skin and the state of one’s liver? It’s hard to imagine that these two organs – one internal, one external, with functions that are so different from one another – could be connected in some way. Yet there is a basis for this.

What does the liver do?

Everyone knows the liver is vitally important, yet most people don’t know what it does. In fact, the liver plays a huge role in the metabolic processes that keep the body functioning at a healthy level.

Among its most important functions are taking the nutrients that one gets from food and drink and converting them into substances that are in the right form for the body to make efficient use of. It then stores these substances until there is a need for them, at which time it sends them on their way to the cells in need.

Another crucial role it plays: taking toxins – substances that are not useful to and are potentially harmful to the body – and either de-toxifying them (so they are basically harmless) or making sure they get sent out of the body.

Poor liver function

If the liver doesn’t function properly, it means the body doesn’t get the good substances it needs and/or it gets bad substances (toxins) that can harm it. The body then needs to find another way to rid itself of the toxins that the liver isn’t handling. And often it does that by secreting the toxins through the skin.

And that’s where dry skin comes in. Often when the body is called upon to get rid of these toxins through sweat, the toxins then create a skin reaction. Dermatitis, eczema, wrinkling, acne and red, itchy rashes are just a few of the ways that inappropriate toxin release manifests.

Penis sweating

Many men can testify that sweating is common around the penis. There’s a reason for this. The penis and testicles tend to be among the warmest parts of the body. Part of this is biological. The thick mane of hair surrounding the penis creates natural insulation. In addition, the penis skin is very thin, in order to allow proper growth during the erect phase, and the rate of blood flow is high in the penis. These also contribute to the generation of heat.

Location adds to the sweatiness. The fact that the organ is nestled between the thighs and usually hidden between two layers of clothes creates extra heat. All of this means that the penis tends to create a great deal of sweat – and therefore to release toxins if the liver is not functioning at its full capacity.

Does that mean that a man with dry penis skin automatically has a liver issue? Absolutely not – but if it is chronic, he may want to bring his concerns to the attention of his physician, in order to determine if there is any connection in his particular case.

Most often there is not a connection with a serious liver condition – but that still leaves a man with a dry penis to deal with. Fortunately, using a first-rate penis health creme (health professionals recommend Man1 Man Oil) can help. A crème that includes both a high-end emollient (like Shea butter) and a natural hydrator (such as vitamin E) offers double-barreled moisturizing that can soothe and repair dry, damaged skin. Add extra protection by selecting a crème with a potent antioxidant, such as alpha lipoic acid, which offsets harmful oxidative processes and smooths wrinkled appearances. Paying attention to penis health has multiple benefits for a man, including better look and feel.

[ad_2]

Source by John Dugan

The Myth of Human Evolution

[ad_1]

Our solar system hurtles through the universe, spinning and turning with the precision and timing of a fine watch. The biosphere of our planet is perfect, able to forever sustain all life in perfect balance and harmony while requiring the addition of nothing other than sunlight. The ‘simplest’ form of life is represented by a one-celled bacteria, acknowledged to be many times more complex than the most complex thing ever created by man. However, the living cell also possesses the miraculous capability of self-reproduction! The human body is comprised of at least twenty trillion cells (20,000,000,000,000), each of which is more complex than a bacterium. Shortly after the human female egg is fertilized it begins producing cells. Somehow, each one of those cells immediately knows where to go and how to begin functioning in combination with other cells in the formation of a greater sub-system, and each sub-system understands how to interact with and begin coordinating with many other systems. Hundreds of millions of cells begin forming into what will eventually become the optic nerve, which is actually an optics and electrical communications bus of fantastic complexity and refinement that allows the brain to process optical data and interpret and regulate functions of vision. In fact, the human eye with its complementary systems is infinitely more complex and refined than the most advanced video camera, and just the lens of the eye represents a level of achievement in optical science that far surpasses the multi-tiered optical systems of the most advanced telescopes. Other processes begin that somehow lead the direction of calcium and mineral carrier cells in the construction of thousands of different, complex designs of bone and tooth formations of varying densities and consistencies. Some have enamel layering depending on function, and others mobile connecting joints with built-in permanent lubrication systems along with blood producing factories located within bone cores that represent nothing less than wonders of technological design. All the while this intelligently guided planning is being organized and inter-coordinated with other processes resulting in the creation of nerve, hormonal, glandular, digestive, lymphatic, pulmonary, muscular, auditory, cardio-circulatory and olfactory systems, sub-systems and organs that reflect a truly incomprehensible degree of complexity, intricacy and engineering mastery. The human brain is by far the most complex thing in the universe. With the tremendous advancements in knowledge gained in recent years as to how the brain functions and what it does, scientists will affirm that using presently available computer technology they could not duplicate the human brain’s processing power or data storage capacity even if they could construct a computer the size of the planet earth! (The fastest, most powerful super-computing arrays yet developed by IBM and NEC have processing speeds equivalent to at most one-third of the brain-of a common housefly.) In fact, it has been estimated that the power and capacity of the human brain to process and store information is infinite! Most of what our brains do is performed without our conscious realization as hundreds of thousands of complex, elaborate systems are constantly monitored, regulated, controlled and communicated with via untold trillions of instruction sets per millisecond, 24 hours a day, over a nervous and chemical network that makes the entire world’s satellite and fiber optics telecommunications systems combined seem like a crude, simple and primitive toy. However, the most amazing thing done by the brain is something that no computer can begin to do, which is to enable the generation of original conscious thought, reason and emotion.

During the 19th Century it was thought by scientists that the universe consisted of two basic entities-matter and energy. Due to the great scientific advancements that have occurred in the 20th Century coupled with a deeper awareness and level of thought, it is now seen that there is a third, vastly more important entity at work in the universe and that is required for life to exist-information. Information is a mass-less quantity that is not reducible to energy. This awareness is forcing another realization that is taking root among many contemporary scientists and thoughtful people-the acknowledgement that information is only generated by intelligence, and intelligence is meaningless, impotent and even impossible apart from an original, driving purpose-in other words a will and a desire-a personality.

Of this kind of science [evolution] it might truly be said that it was `knowledge falsely so called.’ ” Dr. David C.C. Watson, The Great Brain Robbery (1976).

Almost 150 years after the publication of Darwin’s “The Origin of Species”, the postulated law of biogenesis remains unchallenged-life can only come from previously existing life. In Darwin’s time biologic and organic systems were thought to be many, many times simpler than they are known to be today. Just the likelihood of all of the tremendously complex organic components being formed and then coming together by any imaginary scenario of chance to create the nucleus of cellular life, DNA, can be shown to be an impossibility “of the highest order”. Yet even then the DNA could not have survived without the equally complex, highly structured systems of support needed and that are present in the simplest living. The double strand helix of DNA is called by scientists: “The most densely packed and elaborately detailed assembly of information in the universe.” Far from being able to create life in a laboratory, scientists today will readily say that they have only scratched the surface in uncovering the seemingly imponderable mysteries and complexities of organic life. Note: Evolutionists admit that the possibility of the right combination of atoms and molecules falling into place to form just one simple protein molecule is at least 1 in 10 raised to 113- a number that exceeds the estimated total number of atoms contained in all of the billions of stars within each of all the billions of galaxies in the known universe combined! Mathematicians dismiss as having never taken place, even regardless of an infinite time frame, anything that has a probability of occurrence of less than 1 in 10 raised to 50. But far more than one simple protein molecule is needed for life. Some 2000 complex protein molecules are needed just for a cell to maintain its activity, and the chance that all of them could occur at random is greater than 1 in 10 raised to 40,000! However, many scientists feel that this calculation does not represent the most difficult challenge to the spontaneous generation of cellular life, since it doesn’t take into consideration the issue of structure, in the same way that a huge pile of steel, aluminum, plastic and glass is not automatically structured into a Boeing 777.

“Scientists who go about teaching that evolution is a fact of life are great con men, and the story they are telling may be the greatest hoax ever. In explaining evolution we do not have one iota of fact, it is a tangled mishmash of guessing games and figure juggling.” – T.N. Tahmisian, physiologist for the U.S. Atomic Energy Commission.

Within the genetic code of any living thing there is allowance for variation. For example, all members of the feline or cat family could have sprung from just two original cats, a male and a female. But variation and speciation (formation of a new ‘species’), among felines does not represent evolution since there is no vertical or upward increase in genetic complexity that has occurred. It is an example of horizontal change with no increase in complexity, as when dog or horse breeders selectively breed those animals to bring out certain characteristics. A dog can be bred to a certain size, either smaller or larger, but there is a point at which there is no further change possible since that limit allowed for in the genetic material (DNA), has been reached, and it is impossible for a dog to be inter-fertile with any other family of animal. A dog can never become anything other than a dog, and there is no evidence to indicate or even suggest that it has ever been anything other than a dog. Almost all of the so-called ‘evidence’ of evolution that is cited in textbooks represents this type of horizontal adaptation that occurs continually in all living things, however it would be a complete mistake to think of it as evolution as this is not what is taking place. The evolutionary idea that change occurs gradually in living organisms due to the passing on of inherited mutations has been completely discredited, yet this impossibility is still taught as fact in most school systems world-wide! True genetic mutations are extremely rare in nature and of those, 99% are demonstrably harmful to their recipients and render them no beneficial advantage. The extremely small percentages of mutations that are not harmful are seen as being neutral. Finally, almost all mutations are repaired and blocked from genetic transference within 3 generations due to the self-rejuvenating nature of DNA. Just as was the case with the peppered moth in 19th Century England, living organisms are constantly giving birth to a wide variety of non-exact duplications of themselves that are allowed for within the limits imposed by their genetic sphere, and one particular variation can become dominant in any population due to the very real process of natural selection through ‘survival of the fittest’ (but this never results in vertical, upward change representing increased genetic complexity). Dr. Jay Y. Chien, an internationally respected scientist with the Nanjing Institute of Paleontology and Geology in China is best noted for his extensive, groundbreaking research into the best-preserved fossil fields in the world representative of the ‘Cambrian’ geologic era, located in China’s Yunnan Province. Dr. Chien has stated that his research convincingly reveals Darwin’s hypothesized ‘Tree of Life’ to be in reality almost exactly the opposite of what Darwin proposed, (Darwin’s ‘Tree’ is always displayed in high-school and college biology texts as accurately representing the history of all evolutionary descent on earth, and is the most famous icon of evolutionary dogma). However, long-standing research by scientists into the Cambrian era, evolution’s so-called ‘Big-Bang’, has always shown that almost all now existing animal phyla (types) had suddenly appeared in that one geologic time-span. In the words of scientists: “almost overnight”, geologically speaking.

“The creation account in Genesis [Bible] and the theory of evolution could not be reconciled. One must be right and the other wrong. The story of the fossils agreed with the account of Genesis. In the oldest rocks we did not find a series of fossils covering the gradual changes from the most primitive creatures to developed forms, but rather in the oldest rocks developed species suddenly appeared. Between every species there was a complete absence of intermediate fossils.” D.B. Gower, “Scientist Rejects Evolution,” Kentish Times, England, December 11, 1975 [biochemist].

Evolutionary explanations have no means of accounting for instinct in living things, which is the pre-programmed ability of some animals, birds and insects to perform feats that sometimes reflect what almost seems to be a superhuman wisdom. Certain ant colonies in sub-Saharan Africa build large above ground communities that incorporate a very ingenious method of natural air-conditioning that can maintain the interior temperature of the hill at a level 15 degrees cooler than the outside air. The delicate ant larvae within the community need to be maintained at this lower temperature or they will not survive. The exact way in which this impressive feat of engineering was accomplished was studied for many years before it was fully understood, and now the same principle of design is incorporated in civil engineering allowing for the building of much more energy-efficient structures. Evolution has no way of rationally explaining how co-dependency in biologic or ecological systems, also called ‘irreducible complexity’, came about. A very simple example of this can be illustrated by the clotting of blood in all warm-blooded creatures. It has been discovered that the clotting of blood is a very complicated chain of processes involving 8 separate chemical reactions. If one reaction does not occur, or if a specific enzyme or other organic factor is not present, blood will not clot. An evolutionary explanation would require us to believe that the first warm-blooded creature had possessed this extremely complex ability, or it would not have survived, and it would then have needed to pass this ability on as an inherited mutation to its offspring.

“Evolution is baseless and quite incredible.” John Ambrose Fleming, President, British Association for the Advancement of Science, in ‘The Unleashing of Evolutionary Thought’

Oftentimes, highly touted bone-fragment finds are disingenuously portrayed through the media and in textbooks as representing the ‘part animal, part man’ ancestors of humans. However, when the fragmented skeletal remains of these purported ‘ape-men’ are examined by experts in blind studies (when they have no prior knowledge of what they are examining), scientific consensus consistently and virtually always identifies them as representing either the remains of extinct apes, or as in the case of so-called ‘Neanderthal Man’, of a human with an advanced bone disease. When impressive artistic and digital renderings of these peculiar looking creatures as well as the evolutionary stages they supposedly transitioned through are graphically depicted in textbooks, TV programs and magazines, it is on the basis of pure speculation, imagination and wishful thinking. The strongest ‘evidence’ that evolutionists have in attempting to prove that there was once an ape that walked on two feet is a very short span of the imbedded hind prints of an ape without accompanying fore prints located at the site of an ancient volcanic lava flow in Tanzania, Africa; so that this site is world famous among evolutionists. Insofar as several animals including apes can be witnessed running on their hind legs for short distances today, and given the fact of the lava being extremely hot at the time the ape was there producing the prints, does this constitute proof? Note – evolutionists will admit it is the strongest proof they have!

“What is it [evolution] based upon? Upon nothing whatever but faith, upon belief in the reality of the unseen, belief in the fossils that cannot be produced, belief in the embryological experiments that refuse to come off. It is faith unjustified by works.” Dr. Arthur N. Field.

Why would an ‘ape-man’ that represented an improvement over a mere ape go extinct, while its inferior predecessor would not? How is it that flowering plants evolved the necessity of being pollinated by honeybees, therefore requiring a flower, when the atmospheric dispersion method used by most non-flowering plants is much more efficient, and why so many different types and colors of flowers when pollinating insects are for the most part attracted to one flower just as well as any other, and are insensitive to color? Should we expect an ape to possess the highest level of intelligence and reasoning ability in the animal world, as an evolutionary model would suggest? However in many specific aspects this is definitely not the case, and an ape is no more intelligent overall than many other animals. In its evolutionary progression toward becoming a reptile, did a fish undergo the thousands of changes necessary in order to evolve the ability to breath without gills (no small feat), concurrently with evolving the thousands of changes that would have been necessary before its fins became reptilian legs? Did the changes that occurred before the fins became usable as legs or the gills became usable as lungs render the fish a survivability advantage, or were many thousands of useless mutations retained and passed on?

“The theory of evolution suffers from grave defects, which are more and more apparent as time advances. It can no longer square with practical scientific knowledge…The Darwinian theory of descent has not a single fact to confirm it in the realm of nature. It is not the result of scientific research, but purely the product of imagination.” Dr. Albert Fleischman [Erlangen zoologist].

Evolutionists once tried to say that humans possessed hundreds of useless organs that were carry-overs from previous evolutionary stages, what they called ‘vestigial organs’. This was prominently cited as a proof of evolution in the past and it was taught as such in school textbooks, but now it is medically recognized that there are no vestigial organs in humans, none at all. It was once thought by many evolutionists (and taught in some textbooks), that the human embryo mimicked many stages of its evolutionary past while developing in the womb, including one stage where an attempt was made by the fetus to develop fish gills. This is now acknowledged by medical science to be complete, ridiculous nonsense. Evolutionists like to flaunt the fact that there are species of plants and animals living on the Galapagos Chain of islands that exist nowhere else (located off the coast of Ecuador, the Galapagos is where Darwin formulated many of his ideas on evolution). However this is insignificant in terms of even suggesting evolution, as those referred to species are closely related to and inter-fertile with their parent families that do exist on the mainland of Ecuador, so that this represents nothing more than another example of horizontal adaptation. In the book “The Blind Watchmaker”, Richard Dawkins reveals great imaginary talents in illustrating a purely conjectural explanation of the evolutionary process, while offering absolutely no proof of it (and by his own admission the simplest living organism contains at least enough structured information to completely fill all 30 volumes of the Encyclopedia Britannica!)

“I have always been slightly suspicious of the theory of evolution because of its ability to account for any property of living beings… I have therefore tried to see whether biological discoveries over the last thirty years or so fit in with Darwin’s theory. I do not think that they do. To my mind, the theory does not stand up at all.” Dr. H. Lipson, “A Physicist Looks at Evolution,” Physics Bulletin (1980).

While it’s true that the ages of some organic specimens are often erroneously reported as being millions or billions of years old, these ages are arrived at 1) through the use of radiometric dating techniques that are admittedly highly suspect, and acknowledged to be unreliable due to many factors and variables especially as one goes further back in time, but primarily 2) through forcing the age of the specimen to fit into an estimate that ‘seems’ reasonable according to an arbitrary evolutionary time-frame. The practice of arriving at age estimates in this latter way is widely criticized as an example of what is referred to as the ‘*circular reasoning’ of so much of what constitutes evolutionary logic; the presumption that since evolution is true, therefore this is how old it is, this is how it must have happened, etc-a way of thinking that is becoming increasingly ostracized for its lack of scientific soundness. Variables that call into question the validity of radiometric dating methods include ozone layer consistency over time, magnetic field disruption, the very imprecise science of accurately measuring rates of decay (resulting in great disparity of age estimates produced by different laboratories taken from the same sample, or even from the same sample at the same lab), and most fundamentally the extremely flawed assumption that isotopic samples represented a state of zero radioactive decay when first formed. In fact, the trend in science today is to dismiss the validity of ages arrived at through radiometric dating for ages over a few thousand years.

“Therefore, a grotesque account of a period some thousands of years ago is taken seriously though it be built by piling special assumptions on special assumptions, ad hoc hypothesis [invented for a purpose] on ad hoc hypothesis, and tearing apart the fabric of science whenever it appears convenient. The result [evolution] is a fantasia which is neither history nor science.” James Conant [chemist and former president, Harvard University], quoted in Origins Research, 1982.

For many people, objections against considering the possibility of creation are based on a very narrow, artificial definition of science, which states that only observable physical phenomenon belong within the appropriate realm of science to consider. Since creation would require acknowledging the existence of an unseen creator, it is a concept they say exists outside of the proper boundaries of science to evaluate. Yet this violates the true spirit of science which is after all a pursuit of uncovering that which is true, and is tantamount to saying that truth cannot be acknowledged. It is true that an intelligent creator cannot be seen, but many of the most noted scientists of world history-Copernicus, Confucius, Galileo, Kepler, Newton, Einstein, Pasteur, Darwin, Von Braun and many, many more did not doubt the reality of a higher intelligence behind the existence of the universe.

“Unfortunately, in the field of evolution most explanations are not good. As a matter of fact, they hardly qualify as explanations at all; they are suggestions, hunches, pipe dreams, hardly worthy of being called hypotheses.” Dr. Norman Macbeth, Darwin Retried (1971).

[ad_2]

Source by Rockland Zeiler

DIY Wind Energy – A Beginner’s Guide to Home Windmills

[ad_1]

Are you interested in wind energy as an alternative energy source for your home? Many people all over the world are discovering that DIY wind energy is a very doable and worthwhile project that may not be as difficult as some would think.

First let’s get a basic overview of a home wind generator and exactly what you will need to begin. We’ll examine the parts and materials needed to get a basic understanding of generating electricity from the wind.

1. A DC (direct current) motor

2. Sheet metal to build the tail and body sections

3. PVC or ABS pipe to build the turbine blades (fiberglass or wood can also be used)

4. A hub to attach the blades to

5. Deep cycle battery to store excess power

6. AC inverter to convert the power produce from DC to AC current for household use

7. Charge controller-this works like a voltage regulator on an automobile to control the amount of current

8. Dump load-this is an appliance in your home such as a water heater to dump excess current produced.

9. Tower-this can be one of any number of things such as a pole, or a piece of pipe

All of the materials needed can be purchased either online or at a hardware store. The blades will have to be cut

and will need to be balanced to eliminate excessive vibration. Three blades will produce a more constant power production

than a two blade design. A three blade design also will encounter less turbulence and stress during high winds.

DIY wind energy from a home turbine doesn’t have to cost a small fortune to implement, and building an efficient and working wind generator isn’t as complicated as some may think. Resourceful homeowners have discovered that with a little knowledge and the right resources, harnessing the free energy from the wind is well within reach.

[ad_2]

Source by Guy Williams

How to Choose the Best Solar Panels

[ad_1]

Homeowners are increasingly curious about the best option for heating, cooling, and lighting their homes. While the energy grid is a reliable source of electricity, many folks may not be happy with the high bills they are having to pay each month.

Solar panels for Devonport homes represent a way for Tasmanians to break free from that spending, as they take control of the way their home is powered.

Below is a guide to residential solar, which should help you pick the best solar panels for your home.

Solar Panel Costs

The specific price of a solar panel can vary based on many factors, such as size, model, time of buying, and various price promotions. On average, systems of 3kW cost between $3,000 to $5,000, while a 5kW system can run from $4,500 to $8,000.

If you have a large home, you may be interested in a 6.6kW or even a 10kW system. Those cost $5,000 to $9,000 and $8,000 to $12,000 respectively. Families who are unsure about the best sized solar panels in Devonport should ask a residential solar for their input.

Will The System Pay For Itself?

Many homeowners hear the line about how solar systems can pay for themselves. That can be true, depending on the cost of the system and how much money you save.

To start, Australians should not expect to pay upfront for such a system, as most solar system sellers offer payment plans with generous interest rates. That means you are not paying several thousand dollars at once, but spreading the cost over two to three years.

The average homeowner in Tasmania can expect a solar system to pay for itself over four to six years. Most of those savings are realised after you pay off the system, but most families should expect to experience some savings as soon as the system is set up.

What if I Use Energy in the Evening?

A solar system does not mean you can only use energy in the daytime, or that your home will be low on power during a week when it is very cloudy.

Modern solar panels work in conjunction with the energy grid, which means that you can always receive electricity as normal. Even if you have unused solar power from the daytime, you can sell it back to the grid for a specific rate.

Property Values

The final factor that should push a homeowner in the direction of installing a solar system is the increase in property value they will experience. If you compare two homes of similar characteristics and locations, the house with solar panels will have a higher asking price.

If you care about lowering your carbon footprint, hope to lower your reliance on the electricity grid, and wish to save money in the long-term, installing a quality solar panel system at your home is essential. These systems are lower in price than ever, and they will stay in place for many decades to come.

[ad_2]

Source by Edmund Brunetti

Our Life Is Controlled By What We Eat And What We Think

[ad_1]

1. A WHOLESOME DIET

Most people who go on a diet do it because they want to lose weight, or get rid of an annoying skin problem or a disease. But a special diet adopted for these reasons may neither be very beneficial nor procure lasting benefits. Unconsciously you may have linked this diet, however good it may be, with something you fear. Every time you eat, your brain and digestive system produce ‘chemicals of fear’ that act as suppressants of digestion, assimilation and elimination. You are actually afraid of the diet and your body will treat the food you eat as if it were an antigen (a foreign agent that needs to be destroyed). This may lead to food intolerance and even to allergic reactions.

Nevertheless, you can change the reasons why you want to lose weight or help a physical problem. One of the most important steps in this regard is to make improved well-being your Number One motivation for introducing a healthy diet and regimen. What your body is really after is happiness. Happiness can be created by any activity, including eating food. Learn to make the eating process a means to increase happiness in your life and begin to introduce those foods in your diet that are particularly pure and able to enhance your impulse to evolve; Ayurveda calls them sattvic foods.

Sattva, Rajas and Tamas – Three Principal Forces of Life

Sattva is one of the three principal forces or gunas behind every phenomenon and activity in life. With regard to human life, Sattva motivates us to grow, expand, progress and evolve spiritually, mentally and physically, and to find our higher purpose. Like everything in the universe, Sattva has its exact opposite, Tamas, which forces us to stay where we are. Tamas is the force that retards progress, causes stagnation and tempts us to hold on to past events and outdated beliefs. The third force, called Rajas, serves as a neutral link between Sattva and Tamas. Rajas urges us to act, take initiative, move and change, regardless of the direction, outcome or purpose.

All these three qualities are present in everyone and, depending on one’s diet, lifestyle, thoughts, emotions and behavior, expressed in various degrees and intensities. The following are some characteristic descriptions of each guna.

A Sattvic person favors progress above everything else. He derives great pleasure from being creative and innovative. He has a deep respect for life and nature and he always seeks a healthy and life-supportive environment. Sattvic people naturally have healthy habits and prefer pure and energizing foods.

A Rajasic person favors action for action’s sake, regardless of whether it is good for him or not. He has an inner urge to move, overwork his mind and body, be impulsive and impatient and look for an outlet for his nervous creativity. Rajasic people seem to have endless energy and are very extrovert. They prefer stimulating foods and drinks.

A Tamasic person does not want to change and prefers everything to stay as it is. His inactive mind finds comfort in set routines and accustomed environments. Tamasic people tend to dwell on the past and try to avoid the present and future. They rarely develop new ideas or habits in life.

The three gunas, Rajas, Sattva, and Tamas, are mental qualities that correspond to the three physical doshas, Vata, Pitta and Kapha. Ayurveda had a clear understanding about mind/body medicine when it linked basic mental impulses to specific physical conditions, tendencies and disorders. It also categorized foods according to their effects on the mind.

Sattvic food is wholesome whereas rajasic and tamasic foods are unwholesome. Charaka, one of the founders of Ayurvedic Medicine, said thousands of years ago: “The body is constituted of food. Wholesome food is one of the causes for the growth of living beings and unwholesome food is one of the causes for the growth of diseases.” In other words, if we want to progress in life, become vital and healthy and live in harmony with the laws of nature, we need to adopt a sattvic diet. Particularly those who would like to enhance their spiritual growth can benefit greatly from a sattvic diet. The following lists give you an idea about the different effects that food can have on body and mind. The quotations, which explain the three types of diet, are taken from the Bhagavad Gita, a 5,000-year-old scripture that narrates in detail the interplay of the three gunas in a person who treads the spiritual path and reaches spiritual enlightenment.

The Sattvic Diet

“Sattvic diet is that which is unctuous, pleasing to the heart and mind, which stabilizes the body and gives long life, strength and health to the mind and body. A sattvic diet promotes happiness and love for all creatures.” (Bhagavad Gita)

Sattvic diet is sweet in taste, light, unctuous (liquid containing), and cooling (versus heating like in chilli, alcohol etc.). Sattvic foods include:

  • Breast milk (for babies)
  • Ghee(clarified butter)
  • Butter
  • Wheat
  • Basmati rice
  • Yellow mung beans
  • Freshly cooked vegetables
  • Ripened fruits
  • Sesame seeds
  • Rock salt or real sea salt
  • Sesame oil
  • Ginger
  • Dates
  • Almonds
  • Honey
  • Fresh spring water

Any food that has a soothing effect and is digested easily is sattvic by nature, provided we eat it in moderation. Please note: If any of the above foods do not pass the Kinesiology muscle test, they are not fresh, harvested too early, too old, contain harmful chemicals from fertilization, are gassed to preserve them for longer periods, or have been combined with unwholesome foods or ingredients. You may also check with the list of foods for specific body types, which will help you find out what kinds of fruits, vegetables etc. are sattvic for you. Ayurveda considers the sattvic diet to be the most suitable for promoting strength, vitality, a strong mind and lasting good moods, youthfulness and longevity. By beginning to include sattvic foods in your diet, unwholesome habits, addictions and ill health will gradually disappear.

The Rajasic Diet

“A Rajasic diet is that which brings unhappiness, sorrow and disease. It contains mostly the pungent, sour and salty tastes, and it is too hot, sharp and dry, and causes burning sensation” (Bhagavad Gita).

The Rajasic diet is too spicy, strong tasting (like cheese) and includes foods that have a heating effect such as chilli, garlic, onions, pepper, tomatoes, cheese (aged, salted), ripe eggplants, some pulses, meat, fish, sea food, eggs, alcohol, tea, coffee, cigarettes, sugary foods, soft drinks, crisps and similar junk foods. If you are continuously attracted to these or similar foods, it indicates that there may already be a physical or emotional imbalance.

The Tamasic Diet

“Tamasic diet is that which is stored and spoiled, which is without taste and has a bad smell; also leftovers, and food which does not look appealing” (Bhagavad Gita).

Tamasic food is heavy, cold, dry, tasteless, decayed, spoiled, frozen or cooked in the microwave oven. People who do not mind eating tamasic foods are already controlled by the dulling influence of tamas, thus they are insensitive to purity and refined values. Poisoned by tamas and unable to appreciate pure foods and drinks such as water,tamasic people seem to be able to eat almost anything without a problem. Such people are likely to develop life-threatening diseases at some point in their lives.

2. THE POWER OF THOUGHT

A Change of Thoughts

Since every thought manifests as a powerful messenger molecule in the brain, by changing your way of thinking you not only improve your body but also your relationships and your destiny. If the pilot of an airplane decides to change its course by even half a degree the plane may arrive at a completely different destination.

A change of thought can have a similar effect. Remember how good you felt when someone close to you told you how much he or she loved you or cared about you. By contrast, try to imagine how you would feel if your best friend turned around and told you how much they despised you. A little piece of information can be enough to change your entire life. If you don’t like the way you live your life at this moment you can change its course by taking a new decision right now. Take a few minutes to become clear about what you want out of life and then decide to achieve it.

If you face a major problem in life for which there doesn’t seem to be a solution, you may feel that your whole world is collapsing. But if you could see yourself ten years from now and looked back in time, you would realize that life didn’t stop after all. By simply moving your attention away from what is not possible to what is possible, you will be back on track. It’s as easy as that. Whenever you are facing a serious problem in life, go through the following simple steps which are designed to take you into a more positive and constructive space than you are in right now:

  • Think of any one thing or person that makes you feel good. Begin to realize how important this one thing or person is for you and how fortunate you are to have it or them in your life.
  • Think of all the people who are not as fortunate as you are, like the homeless, sick and starving.
  • Imagine how you would feel if you fulfilled your heart’s desire(s).
  • What would you do as a first step towards achieving your goal?

One of the main reasons we attract problems into our lives is because we don’t do what makes us happy. We send out negative messages by saying: “I wish I didn’t have to work so hard”, “How in the world did I deserve this?” or “Life is a struggle!” Your life, and that includes the current condition of your body and mind, is the product of your thoughts and feelings. Thoughts influence everything far or near, material or non-material. If you want to examine what kind of thoughts you had yesterday, then look at your body today. If you want to know what your body is going to be like tomorrow, look at the thoughts you are having today. Every movement and activity in your body and mind is controlled or matched by the corresponding neurotransmitters. Not a single idea, desire, feeling, like, dislike understanding or misunderstanding can go through your mind without creating corresponding physical counterparts.

Happiness – Your Key to Nature’s Drug Store

Your brain is capable of manufacturing any drug that could possibly be made anywhere in the world, provided it receives the ‘go ahead’ signal from you, its master. The brain requires neither a sophisticated chemical laboratory nor much time to develop the most exquisite drugs for any type of physical or mental problem. With the few types of natural food ingredients mentioned above, it makes neuropeptides and related chemicals for every condition you could possibly develop.

For example, if you suffer from pain, your brain makes endorphins and enkephalines, morphine type compounds that are at least 40,000 times more powerful than the strongest heroin. If you injured yourself and your brain didn’t instantly produce these drugs, you would not be able to endure the pain and would faint or go insane quickly. Since endorphins are also related to the experience of pleasure, you will make more of these drugs when you find joy in what you are doing. People who suffer from emotional pain soon begin to have physical pain, too; their brains are inhibited from making adequate amounts of painkillers.

If your body signals ‘cancer’, your brain synthesizes anti-cancer drugs or immune-stimulants that boost your immune system to take care of the problem before you even know it. Each day, millions of our body cells mutate and become cancerous but our immune system deals with them instantly and without the help of chemotherapy, radiation, or surgery. We do not have to concern ourselves with the millions of new cancer cells each day unless, of course, our body fails to destroy them. Cancer is the physical counterpart of an unbalanced emotion that contains a clear message: “There is an antagonistic element in your life which is wasting away your body.” This foreign element can be low self-worth, repressed emotions, a negative outlook on one’s life, an unexpressed or unfulfilled desire, defensive responses to a hostile partner or environment, or an unbalanced diet. Usually, there is a combination of factors. Instead of trying to cut out this foreign element, you can learn from it and transform it for your own good.

We generally tend to blame heart attacks, cancer, osteoporosis, AIDS, etc. for causing most deaths in the world as if these diseases were powerful monsters that are out to destroy life indiscriminately. Only a few of the people afflicted with a serious illness question why they manifested it in the first place. Instead of deciding to put all your energy and effort into a particular problem, which tends to escalate it, you can direct your attention towards what you feel could contribute to your happiness. Make happiness your motivation and goal. Always seek happiness as the reward for your actions and the rest follows automatically. Wherever there is happiness, there are solutions and wherever there is unhappiness, there are problems.

Energy Follows Thought

Energy follows thought is an excellent phrase to remember. Do not waste your energy on a disease, on a difficult partnership, on your financial troubles or on an annoying neighbor. You are practically feeding these problems with your energy and thus will maintain or even worsen them. This may give you the illusion that they are real. When you analyze all the solution to problems worldwide, they have never been found by dwelling on the problem. Conflicts, wars, economic struggles, disasters, etc. ended when the involved groups or people began to focus their attention on what was possible rather than what was impossible. We always have the choice and freedom either to argue over who or what is responsible for our problems or to look for real solutions. There is no need to know what causes the darkness of the night when we know that there will be a dawn of a new day.

You may remember how downcast you were when your life was in a state of crisis and how remote and insignificant that problem became a while later. A problem begins to dissipate when we take our attention away from it. For example, if you suffer from a sleeping problem, instead of worrying over the fact that you cannot sleep, you could bring your attention to your breathing or think of things or people who bring you happiness. Suddenly you will find that insomnia isn’t so bad after all, and then you will drift off naturally. Should the problem persist, use it as an opportunity to take a closer look at your life. If you are not happy at night times, it indicates that you have not been happy during the day either. Use the insomnia to find out what doesn’t make you happy in life and then think about how you can change it.

You may decide that you want a better job that inspires and fulfills you more. Be daring when it comes to fulfilling your sire but do not admit defeat before even trying. The argument that you may not be competent or clever enough for a better job is illusory. You will always be good enough for a job you feel attracted to as long as you focus on it. If you keep telling yourself that you are not good enough, you have created the exact limitations that will keep you there until you come up with the courage to say that you deserve much better.

We let ourselves be so easily persuaded to believe that it is another person, society, the government or even destiny that holds us back from achieving our dreams. But it is only our limited thinking that keeps us confined to failure or lack of success. The old saying “where there is a will, there is a way” is a law that holds true for everyone under any circumstance. The three P’s, Patience, Persistence and Perseverance, have been the dominating qualities that have helped transform common people into the most successful and pioneering personalities the world has ever seen. It was Mahatma Gandhi’s vision of a better society that propelled him to endure the difficulties of his life. Stephen Hawking became one the most brilliant physicists in the world despite his total speech deficiency and paralysis. Instead of dwelling on his incapacitating disease or feeling sorry for himself, he made an enormous contribution towards understanding and utilizing the most fundamental laws of nature.

The greatest athletes of the world have had their fair share of major difficulties before they managed to rise to the op. Most famous artists and musicians had to go through periods of failure and rejection before they were acknowledged to be among the best. Many of the truly successful people share one common principle of living: they want to be more and more creative because they know that being creative is the only source of happiness. We all share the same infinite potential that creates and maintains the entire universe. What makes the biggest difference between people is that some have decided to use their potential and apply the three P’s in their life, whereas others have not. You, too, can make that decision. You can make it right now! All it needs is a shift of attention.

[ad_2]

Source by Andreas Moritz

Benefits of Plastic Injection Molding

[ad_1]

Background on Plastic Injection Molding

It is the technique of producing parts of thermoplastic and thermosetting plastic by blending and binding into molds and cooling them to mold into an intended object. This injection process that we are going to talk about in this article is not a fresh concept its existence can be witnessed since 1872. Only after the discovery of the molding, the plastics industry experienced huge earnings in billions and hence this is now considered to be one of the best molding methods available.

Benefits of Plastic Injection Molding

As said above it is the most adopted technique for manufacturing a large volume of parts. To give a precise shape and size to the desired object this process focuses on using a heated barrel and a special molding cavity. A bulk of the products available in the market has proven to be the beneficiary from plastic injection molding. The different industries listed below are the ones that have been benefited the most:

1) Electronic Industries: Electronics are being manufactured through the process of plastic injection molding reason being that plastic does not ingest humidity and does not enlarge when exposed through heat.

2) Toys: All kinds of toys available in the market, whether they are feature action figures or detailed collector’s toys are produced through plastic injection molding.

3) Medical: Some of the equipment and tools that surgeons use such as cups, vials and, jars required for sample collection and throw away forceps are made of plastic injection molding.

4) Shoes: Plastic injection molding helps in developing the desired shaped soles that in turn provides support and comfort to the shoes.

5) Food and Beverages: Millions of restaurant and food outlets spread across the world are using plastic spoons, plates and, forks which are the ultimate products of plastic injection molding.

Requirements and Skills for Injection Molding Operators

Before the production of a molded product, the first sample needs to be submitted to an inspector for inspection. After the inspector notifies it as qualified, it is then processed further for mass production. After getting the product as notified and producing in bulk, each carton must have the details on the production card.

When it comes to giving a precise shape and size there is a need for using proper tools such as blades and diagonal pliers. The right use of clamp and fixture and need to operate strictly as per the clear instructions of each fixture is important. All the process is dependent on how the machine works and which machine to use that promise to provide safety. Any abnormal production or abnormal product quality needs a technician on an immediate basis to deal with it.

JasonMould founded in 2010 is a prominent plastic injection molding manufacturer in China. JasonMould specializes in mold production for electronic equipment, household appliances, medical equipment, surgical equipment as well as monitoring systems. This company that possesses different machinery and expertise offer tools from small and precise mobile phone parts to the big automotive parts. The diversion strategies adopted by JasonMould have been winning compliments from customers all over the world.

[ad_2]

Source by Arthur Huang

Protect Hygiene Standards in Large Kitchens by Using Professional Cleaning Companies

[ad_1]

Many business premises, as well as schools, hospitals and residential homes, include large scale catering facilities for employees and all need to make sure that hygiene standards are high enough for the safety of workers and diners.

If kitchens are in heavy daily use it can be difficult to find a time for routine maintenance or for a thorough deep clean and both are needed at regular intervals regardless of how rigorous the daily cleaning and hygiene regimes may be.

Ensuring through regular maintenance and cleaning that a large kitchen complies with Health and Safety, environmental protection and food hygiene requirements can be a good investment. It can also help to keep insurance and energy costs under control.

Pristine cleanliness in a kitchen means that not only all surfaces and equipment need to be kept hygienic. There is a significant risk of fire if extraction systems and ductwork are not kept free of greasy deposits and dust building up and the efficient functioning of an extraction system is also important to controlling moisture deposits from steam that can make floors slippery for people working in the kitchen.

The most efficient way of establishing a regular maintenance and deep cleaning regime is to use commercial kitchen cleaning services.

Reputable commercial kitchen cleaners will be able to supply fully-trained staff who understand health and safety and hygiene regulations as well as the guidelines for ensuring heating and ventilation systems, including filters, are working at peak efficiency. hey will be supplied with all the appropriate cleaning tools and materials available to give the kitchen a thorough top to bottom deep clean.

When considering a company it is worth asking whether they follow HVCA (Heating and Ventilation Contractors’ Association) best practice guidelines. The HVCA is the industry body for ventilation systems and was established in 1904. It is involved in the design, installation, commissioning and maintenance of heating, ventilating, air conditioning and refrigeration products and equipment and its members are all subject to regular third party inspection to ensure that contractors are technically and commercially competent.

It should also be asked whether the cleaning company can provide certification of maintenance and cleaning that can be supplied to the insurers and kept on record to demonstrate that the company is complying with all the regulations.

A walk round of the kitchen with the contractor is advisable so that they can accurately assess what will be involved in the job and organise the cleaning programme to cause minimum inconvenience in the daily routine of the kitchen.

An experienced and reputable company will also provide a report of the work carried out and identify any problems or issues it may have discovered that may need attention.

Copyright (c) 2011 Alison Withers

[ad_2]

Source by Ali Withers