/ By edd / spiral-freezers/ / 0 Comments

Excessive Sweating Causes & Treatments

[ad_1]

Sweating is the main mechanism for cooling the body. Evaporation of sweat cools the body and maintains body temperature that may not exceed 37 degrees, so that they could be different vital processes occurring in our body proteins that regulate them. Sweat, which is composed of water, salts and debris, passes under conditions of increased quantity of hot weather or during strenuous physical activity.

Excessive sweating

In contrast, hyperhidrosis is not related to physical activity or outdoor temperature. There are two sub-groups of hyperhidrosis:

• General Hyperhidrosis: Perspiration felt by the whole body. Other reason could be due to various skin diseases, neurological diseases, hormonal disorders and even overweight. General sweating treatment is felt throughout the body which is by addressing the source of the problem.

• Focused Hyperhidrosis: often appears in context to some organ or number of organs in the body. Sweating occurs mostly in the armpits, hands and feet and face. Other common cases are when you sweat in the buttocks, groin, between the breasts in women and along the back.

Focused hyperhidrosis, is more common in general, and it is estimated that about 5% to 10% of the population are suffering, women and men alike. Other causes of excessive sweating is hereditary in 40% of cases pertains to over-active sweat glands in the body and the sympathetic nervous system, that responsible for operating and controlling the sweat glands, sweating amount and timing. Increased sweating in hands and feet usually appears the second decade of life and in early childhood. In the armpits it starts towards the end of teenage years, facial hyperhidrosis usually begins somewhere about the age of 40 and older.

Stress & shame

Hyperhidrosis severe at moments of stress and excitement in the summer, is caused by excessive activation of sweat glands in particular parts of the body by the nervous system. Then the nervous system increases it’s activity in the states of stress and sufferer from the phenomenon sweats much more in these situations. Unfortunately, the early concern with the phenomenon of hyperhidrosis stresses the mechanism and causing increased sweat.

Hyperhidrosis causes damage to the quality of life of suffering from it. Injury manifested by social problems, discomfort, and avoidance of certain activities. Limbs of sufferers and their clothes are wet all the time, they are embarrassed to shake hands and objects slipping from their hands. Feet hyperhidrosis makes it difficult to walk with shoes because of the slipperiness that it causes. Excessive sweating may cause those who suffer from it to avoid social activities and occupational damage (lack of desire to work in representative professions).

In addition, functional problems might occur at work, such as destruction of a computer keyboard or wetting pages when you write. We recommend that you remove all food from the triggers stimulating the nervous system and contain caffeine, including coffee, tea and chocolate. It is also advised to avoid foods that are considered as increasing body heat, such as cinnamon, pepper and cloves, and the food which secrete smell in sweat (garlic, fenugreek and curry). Instead, recommended for cooling foods (lettuce, cucumber, etc.) And soothing foods, like oatmeal.

Surgery or paste?

According to experts and specialists there are several treatment options:

1. Sympactomy surgery is the oldest treatment with the sympathetic nerve severed the chest cavity. This treatment is especially effective for palms hyperhidrosis.

2. Injection of Botulinum toxin type A (Botox, Dysport) – A toxin that has been exploited for several years when he distilled in small doses as a safe remedy by injection, among other things, for excessive sweating. This treatment ensures complete elimination of sweat glands in the organ. Treatment need to be repeated every 6-12 months.

3. Treatment with an electric current – induced organs during the sweating process in aqueous solution containing ions, to dry the sweat (especially for hands and feet). In most cases the treatment is abandoned by patients because of its inconvenience and side effects.

4. Surgery of sweat glands extraction- a relatively new treatment performed only in the armpits.

5. Local therapy using ointments or deodorant – aluminum salts concentration neutralizes the sweat, but usually not enough to eradicate the phenomenon (unless you sweat normal level) and the aluminum may cause irritation, burning a blockage of the glands.

[ad_2]

Source by Ilus Vinos

/ By edd / spiral-freezers/ / 0 Comments

Why Tractor Engines Can Overheat and How to Correct It

[ad_1]

Its farming time whether its tillage, plowing, or just normal farm work. It’s a hot day, and there are lots of things to get done around the farm. However, suddenly you notice that the temperature gauge is showing higher than normal temperature reading. At this time, it’s wise to stop operating the tractor, and if the temperature level is not at its peak level on the gauge, make a quick check of the engine area to detect any leaks or other obvious problems, and then return quickly to turn the engine off.

The older tractors will not have safety shut off devices. The newer computerized controlled tractors will have audible alarms and in many cases, these controls will automatically shut the engine down when excessive temperature readings are present.

A tractor’s cooling system comprises of several components. There is a radiator, a radiator fan, water pump, lower radiator hose, upper radiator hose, a thermostat, and a liquid that flows through the engine, to the radiator where it is cooled, and then re-circulated back into the engine to continue the cooling process.

The first step in diagnosing an overheating problem is to ensure that there is enough fluid in the radiator. This can be checked by looking in the overflow container. If that is filled, and there is no blockage from the radiator to the overflow container, then the engine must be allowed to cool. Once cooled, the radiator cap should be removed and the radiator checked for fluid.

If there is a fluid shortage, then the cause of the shortage needs to be identified. A damaged lower and upper radiator hose can be changed. The clamps on the system can be tightened or changed.

For fluid shortage, there should be visible leaks around the failed component, either the hoses, a leaking radiator, or broken water pump. Should there be no visible leaks and missing cooling fluid, then this can indicate a damaged cylinder head gasket that is allowing the fluid to either leak into the engine, or be pulled into the combustion chamber, burnt, and then exhausted.

The thermostat, a simple device, is located directly in the path of the flowing liquid. It contains a bi-metallic disc, that opens when immersed in fluid of a high temperature, and closes when the temperature of the fluid reduced below a predetermined level. Typically, most thermostats will fail in an open manner, thereby allowing over cooling rather that the opposite, overheating.

A simple way to test the thermostat is to put it into a container of water and bring that container to a boil on a stove, or hotplate. As the water temperature reaches boiling, the thermostat should begin to open. If it doesn’t, then it needs to be changed.

Other sections of the cooling system not discussed here are the water pump, and the radiator, gauges and radiator cooling fan systems.

[ad_2]

Source by Marlon Khan

/ By edd / spiral-freezers/ / 0 Comments

5 Key Advantages of Natural Ventilation Systems in Buildings

[ad_1]

All buildings, whether residential or commercial,require adequate ventilation in order to protect the health of occupants in regular circumstances as well as in emergency situations such as fires or other contaminations of the air.

There are several types of ventilation systems, with the two main ones currently in use being natural ventilation and mechanical ventilation. Each of these is distinctly different in its way of working as well as the advantages and disadvantages it brings to the structure it is integrated into or installed in.

The presence of either of these systems is critical for a number of reasons, including the removal of stale air and toxic gases, the replenishing of fresh and clean air in an environment, the removal of moisture, and the elimination of odours, bacteria and excess heat.

Natural ventilation basically refers to any system that does not require the use of mechanical devices to displace air in the structure, instead using organic airflow and openings to draw stale air and pollutants through and out of the building.

In this lies the first of five major benefits that this type of system offers – potentially reduced installation costs compared to its mechanical counterpart. This only applies in certain circumstances however – if an effective system is designed as part of the structure before construction, then the costs are absorbed into the build.

It should be noted that mechanical systems can still offer better value for money where having the maximum surface area available is important for getting the largest commercial return, for example in car parks, some retail environments and other similar venues.

The second advantage to natural ventilation is also budget-related; mechanical installations can be very costly to operate, not only due to the need for fans, but also because of air conditioning units which can increase energy consumption costs by up to 30% per building according to reports.

On the other hand, more organic ways of optimising air circulation in structures can mean that this cost is practically eliminated, making it a financially-sound long term solution for companies that are looking to economise in all the areas that they can.

It is should also be noted that this type of ventilation is also a great deal greener than mechanical ventilation systems, as it uses significantly less energy to operate efficiently. For this reason, the third advantage of natural ventilation is the fact that it is the far more environmentally-friendly solution out of the two main choices, and is therefore also possibly a real solution for the future.

A fourth benefit that comes with using a more organic and already-integrated ventilation solution in a building is that fact that its rival – the mechanically driven system – requires regular maintenance to make sure that it is doing its job properly and that it meets the relevant healthy and safety requirements.

This is not so true for natural ventilation systems, which do not have as many essential parts that need regular upkeep and replacement on a frequent basis. Although all systems should be regularly inspected to ensure that they are working optimally, costly and lengthy maintenance work is virtually eliminated with this option.

The fifth and final advantage of natural ventilation is that it has been shown to be a popular choice of system with building occupants compared to the mechanical variety. The reason for this is thought to be due to the level of thermal comfort that each choice provides, with many finding that mechanically operated solutions often make a room too cold or too warm.

Conversely, the other option is often able to effectively maintain an ideal temperature, despite the fact that there are no controls apart from simply opening or closing a window.

All types of ventilation systems have their good points and bad points, and the natural solution is no exception. That said, it is an option that brings considerable cost savings, not to mention improvements in occupant comfort and less of a negative impact on the environment, making it a potentially ideal solution for a greener future and a thriving global economy.

[ad_2]

Source by Lorenzo Jones

/ By edd / spiral-freezers/ / 0 Comments

5 Tips to Increase The Life of Your Split Air Conditioner

[ad_1]

We often call professionals that provide industrial electronic repair to get our appliances repaired and our split air conditioner is one of them. Every year thousands of people call to inquire about the electronic parts and services regarding their split AC. Global warming is on a new high and long gone are those days when winters actually used to be long. This has ultimately made us more dependent on our beloved split ACs and the pressure on these sophisticated electronic appliances has all the more increased.

Split Air Conditioner Tips

To ensure the smooth functioning of your split AC you need to take care of its proper maintenance. By following the points given below one can easily add a few more years to their split AC.

1. The filter is a quintessential part of an AC and must be changed every month or after every two months depending upon the use. As the name implies, the air filter filters out the air and separates dirt and pollutants from it. Changing the air filter periodically will ensure that the air you are breathing when the AC is switched on is void of any pollutants. Moreover, it lowers maintenance cost significantly.

2. Just like the filter, AC’s compressor is another important part. It helps to compress low pressure and low volume gas into a high pressure and high temperature gas that’s needed by the AC for its functioning. It also helps to remove vapour from the evaporator so as to maintain a low boiling point. Cleaning the compressor on a regular basis will give you cool and refreshing air for a long period of time.

3. While passing through the air conditioning system the air also passes through the evaporator coil. This coil absorbs all the heat from the air so as to provide cold, fresh air in the space. If you are getting warm air from your AC, there is a high probability that your AC’s evaporator coil might not be functioning properly. Replacing this coil with a new one can certainly improve air flow and its circulation in the home.

4. All air conditioning systems use some sort of refrigerant as a part of their machinery so as to absorb excess heat and contribute in the supply of cold air in the house. However, at some point of time in its life your AC might experience a refrigerant leak. Hence, a reliable company that provides industrial electronic repair solutions regarding air conditioners should be called-in immediately to repair that part.

5. Proper air conditioning maintenance must include regular cleaning of all those air ducts from which the AC is able to provide fresh, cold air. In an air conditioning system, air ducts are generally spread throughout the house so as to keep the entire area cool and pleasant. Hence, the ductwork present in the AC must be cleaned on a regular basis so as to remove all sorts of dust and dirt present on air ducts.

Maintenance cost of both – window and split air conditioner is generally the same, hence it does not matter which AC you use as maintenance is vital for both of them.

[ad_2]

Source by Geoff Child

/ By edd / spiral-freezers/ / 0 Comments

Portable Evaporative Coolers – Champion Gadabout Models

[ad_1]

If you are going to be shopping for a new Portable Evaporative Cooler, or Swamp Cooler as some call them, I would like to make a few suggestions. Champion Cooler Corporation makes five models in the Gadabout Series that you will find are excellent choices. Each model fits a particular need from the smallest model, the Champion M150, to the largest model, the Champion M500. I will mention a few features about each of the five models. There are dozens of businesses that sell Champion Portable Coolers online and will ship them to your home or business. I recommend checking prices and shipping costs at several of these businesses as prices can vary greatly. Go to Google or Yahoo and type in Champion Gadabout Coolers and you will find quite a few businesses listed. They will also list the features as well as pictures of each model. I will mention a few features that I like.

The Champion M150 is the smallest Gadabout model. It is shaped similar to a box fan but is about 17 inches thick. This model has a handle and is on casters for easy mobility. The fan has a 1/8 HP motor with 3 speeds. Even though this motor uses very little power it delivers 1100 CFM on high speed.

The Champion M201 is a larger model, and as with the rest of the Gadabout models, is more of a square shape. This model, as well as the next three I will describe, is generally used in garages and work shops. It is also on casters like the rest of the Gadabout units. This cooler should be used for cooling areas up to 700 square feet. The Champion M301 is the next Gadabout model and is a little larger. This model weighs about 100 pounds and may be too large for a home Portable Cooler. It has a 2 speed motor and cools up to 1000 square feet. Once again the Champion M401 is larger yet. The M401 can cool up to 1400 square feet and comes with a 4 way directional grille with easy move vanes.

The largest of the Gadabout models is the Champion M500. Even though this model weighs 195 pounds, as with the other Gadabouts, it is on casters and is easily moved around in your shop. With the Champion M500 Cooler you can cool a large area. It delivers 5000 CFM with it’s 3/4 HP, 2 speed motor. This model also has a 4 way directional grille with easy move vanes. There are two other features that make the Champion M500 superior to other Portable Evaporative Coolers. It has a 47 gallon reservoir to give more cooling time between refills. It also comes with a 20 foot cord with a GFCI safety plug.

As you can see the Champion Gadabout Coolers are made for every situation and need. I have not only used Champion Evaporative Cooler products, but I have also visited the Champion factory to watch them build their products. I recommend that you consider Champion Coolers.

[ad_2]

Source by Aaron Washburn

/ By edd / spiral-freezers/ / 0 Comments

Feeding Otocinclus Catfish – 3 Easy Tips on What to Feed an Oto

[ad_1]

Otocinclus catfish can be very handy fish to have in your aquarium. They will gladly graze on any soft brown or green algae that grows in your tank. However, what happens when your Oto eats all the algae and it doesn’t grow fast enough to sustain your catfish? Well, there are several other types of food that you can add to supplement your Oto’s diet.

1. Otos love to eat fresh vegetables. Veggies such as spinach, romaine lettuce, parsley, cucumber, zucchini, green beans, and peas are all great options. Cut them into small pieces and then blanch them, as these catfish need the veggies to be soft in order to eat them. If there are any vegetables left in the tank around 24 hours later, make sure to take them out before they dirty the water.

2. Another food that you can feed your Otocinclus that they love is frozen bloodworms and brine shrimp. These are a good source of protein that your catfish might not otherwise get, as they are mostly vegetarian. If you have other fish in your tank, be aware that your Oto might not get to the frozen food before any other fish do, as nearly all tropical fish go crazy for these frozen foods.

3. A third great option is algae pellets and flakes. These are convenient to feed and are fairly nutritious. Make sure that the ingredient list has spirulina (algae) near the top, as that is what attracts the catfish and may be the difference between your Oto ignoring the food and eating it.

As you can see, there are many different foods that you can feed your Otocinclus if your tank doesn’t have enough algae for the fish to eat.

[ad_2]

Source by Angela Marie

/ By edd / spiral-freezers/ / 0 Comments

Principles of Ancient Egyptian Food Storage

[ad_1]

The process of food preservation is a system used to conserves a quantity of food for some future time and date. There has always been some sort of food preservation employed in just about every culture and nation of the world since early times. In generally, we find various methods used such as canning, cold storage, drying, fermenting, freezing, pickling, salting or smoking according to the location where the culture resides. Some areas blend in with certain types of preservation while others are better suited for alternative methods.

The early ideas pertaining to preservation centered on preserving the food in a manner that likely imitated the exact method used by nature and duplicated how it was naturally accomplice. Original practices made maximum use of cold storage, drying, freezing, fermenting or drying. These were natural processes which occurred often in common fruit. Ancient Egyptian records have reveal their use of salt curing, smoking, pickling, drying, or fermenting as the popular methods used in those days. Drying food methods have been claimed to be one of the oldest means on earth to preserve food with tomb dating instructions discovered in China over 2000 years ago. These Chinese instructions described the various processes involved in salting, drying as well as pickling bamboo shoots. Many 16th century records indicate that the European conquerors in Maya used a method of smoking foods in order to preserve peppers. Methods such as sun drying, smoking, or salting have been used on most perishables including many species of fish.

Salt has traditionally been employed for preservation of meats and fish since ancient times. Various cultures would obtain their supply of salt either directly from the earth deposits or from seawater which had been dried out. The salt has traditionally been employed to create various brines or used in the drying processes for fish in particular.

The ancient Egyptians often used a method known as “banking” in order to preserve much of their perishable foods. The process consisted of digging a hole in the ground and then lining it with wood, leaves or possibly straw so as to make a sort of barrier between the food and the soil. Caves represented the more natural form of “banking” and were used whenever they were available to preserve foods. Foods would be successfully stored in containers made from skins, reed baskets or in various pottery vessels and then placed either in caves or in the holes dug in the ground. Liquids naturally required a much more diverse approach and their types of containers were entirely different.

Pests such as insects, damage as a result of moisture or weather, mold or fungus would often lower the quality of the saved foods and these hindrances had to be taken into account when planning for future food storage. If you stop for a moment and think carefully at how these early civilizations stored their food perhaps we too as survivalists could create a similar storage to serve the same ends.

Copyright @2010 Joseph Parish

http://www.survival-training.info

[ad_2]

Source by Joseph Parish

/ By edd / spiral-freezers/ / 0 Comments

How to Choose Between Refrigerated Vans, Trucks and Reefer Trailers

[ad_1]

Refrigerated vans are not only a very helpful way to transport products, but also a nice method to start a profitable business. Either way, you should find out more about these vans. It will assist you better to recognize how they can help people.

You should know for the very start that buying refrigerated vans will charge you a lot, and the prices vary between $38,000 and $78,000. These values are for new vans, but it’s pretty much the only choice you’ve got, if you want to make sure you get a quality product. By purchasing a second-hand van, you risk a lot and on the long run, the money saved here will be lost on repairs and other nuisances.

Refrigerated trucks are huge trucks, and if you’re just starting out and you don’t know how well your business is going to do, it would be better to invest in a small trailer, such as a reefer trailer. Much cheaper than a regular truck, this trailer also has the advantage of being cheaper to insure. This will keep you initial venture to a minimum, while you see how things go.

Reefer trailers are not hard to find if you want to buy one, but choosing one is a bit of a challenge. Positive testimonials and low energy consumption are two of the things you should be looking for, when buying or renting such a van. If you are pointed into the right direction, you’ll have no problem in finding the right prices to either rent or buy such vehicles.

One more advantage that reefer trailers have is the fact that they can be easily detached from the main vehicle and that vehicle will be able to perform other tasks. So simply tow the trailer to its destination, leave it there, do your business, and then come back to get it! When your business is just starting out, and you need your vehicles in different places during the day, there’s nothing better than being able to do so!

A refrigerated van on the other hand offers much more space. However, do you really need all that space? You may not need all of it, and you may not use it, but you’re certainly paying for it. If you know that you won’t have items to take up all the space, and you think this won’t change in the near future, then there’s no point in investing in a large van.

Choosing between a refrigerated truck and a reefer trailer is a very vital decision and once it is made it will have a major impact on your business. If you need the additional space than a truck is the best choice, while if you need the resources for something else, go for the latter with no hesitations.

[ad_2]

Source by JC Tena Tolentino

/ By edd / spiral-freezers/ / 0 Comments

The Benefits of the Typical Whirlpool Fridge Freezer

[ad_1]

If you are in the market for a new fridge, you should consider purchasing a Whirlpool fridge freezer. There are plenty of brands that you could go with when it comes to buying a new refrigerator, but there are a few reasons that you should give this company a chance. Consider the main benefits of the standard Whirlpool fridge freezer before you buy.

One of the most obvious reasons for buying this kind of appliance is that the brand is quite well-known. This not only means that you have likely experienced its quality through other appliances or even past refrigerators, but it is also easy to find. If you go to any appliance store or website that sells fridges, you will probably immediately see at least one Whirlpool fridge freezer available. This can make the shopping experience easier than if you were to consider a brand that no one has heard of.

Since this company is well-known and has a reputation to keep up, you can rest assured that if you have any issues with your Whirlpool fridge freezer, you will probably be easily helped. There are several ways to contact this company with questions or concerns, which means that you will likely not be left with a fridge that does not work and no one to help you. Additionally, if it does need repairs, it should be easy to find replacement parts for a Whirlpool fridge freezer, as well as repairmen who have worked with this appliance before.

Of course, as one of the largest manufacturers of appliances, this company has a wide range of products. You can usually find the size, style, and color of Whirlpool fridge freezer that you want quite easily. This is another way that the shopping experience is made easy when you decide to browse these products. This company usually has the latest style of fridge available, along with both the standard features and those that you cannot find anywhere else.

Shopping for a new fridge can be tiring since you have to decide on the style, size, and color you want while comparing features and prices. The good news is that you can usually find exactly what you want in a Whirlpool fridge freezer just by checking out the company’s website. Of course, if you do not end up finding what you seek, rest assured that there are plenty of other appliance companies out there to start researching.

[ad_2]

Source by Amy Smart

/ By edd / spiral-freezers/ / 0 Comments

How to Plan Your Relocation to New York

[ad_1]

New York City redefines one’s life and turns it around by 180 degrees. At times it might look like a concrete and steel wilderness, and at times the same city offers your Central Park- which feels like a free-pass one has earned surviving in this tough city. New York can be merciful and tough on you- but I guess one would agree, it changes you as a person for the better. Relocating to NYC can turn out to be one of the best chapters in life. With thousands of communities, ethnicities, races, all genders, faiths and their numerous languages- New York City shelters you like no other city does. One of the biggest financial capitals of the world, it is the most populous city in America. Proud of its status of being a ‘Global Power City’- New York majorly influences global trends pertaining to Fashion, Finance, Art, Literature, Education, Commerce, Technology, Entertainment and much more. New York has one of the largest harbours in the world and it is divided into 5 Boroughs, namely: Brooklyn, Queens, Manhattan, Staten Island and the Bronx. We have come up with the perfect relocation guide for you. Let’s take a look: –

Accommodation and Neighbourhoods:-

Though there are numerous upscale and decent neighbourhoods in New York City, there are some localities which are all-encompassing and cater to everything that one would need in terms of ease of access to transport options, quality schools and healthcare centres, utility and departmental stores, general safety of the neighbourhood etc. Some of the best neighbourhoods, which score high on these parameters are Manhattan, Chelsea, Midtown East and Gramercy.

Midtown East is one of the most upscale and chic localities of NYC with iconic city landmarks like Times Square, Rockefeller Center, Broadway. You can find incredible one, two, three bedroom and Studio apartments in Midtown East here.

Manhattan: Known to be one of the economically high-end neighbourhoods of NYC, Manhattan is pure ‘city-living’. Towering skyscrapers, gourmet restaurants, popular attractions like Central Park, New York State Library etc. Accommodation in Manhattan can range from one, two bedrooms to Studio apartments for a single person. Value-for-money, a range of exclusive amenities, minutes away from the tube station- these apartments will be the most practical choice for you in Manhattan.

Chelsea is the neighbourhood to be in if you like a more vibrant, artsy and lively neighbourhood that feels closer to home. From exquisite art galleries to the best of fashion and amazing restaurants- Chelsea has ‘unadulterated life’ to offer to you. Mostly red or brown sandstone or brick buildings amidst new age contemporary architecture- Chelsea has the best Service Apartments that will make you instantly feel at home. With fully-furnished apartments, stocked kitchens, best of furnishings in bedrooms- we strive to make you feel like you never left ‘home’.

Gramercy: This neighbourhood bestows ‘exclusivity’ like none other. From private parks for residents, high-scale living spaces, greenery all around, luxurious apartments- Gramercy will provide you everything you need, so you won’t have to move out of the neighbourhood for literally anything. Luxury apparel outlets, bookstores, libraries, good schools- Gramercy defines good living standards. Check out amazing serviced apartments in Gramercy that shall grant you with worry-free living with prompt maintenance, state-of-the-art amenities, modern furnishings and unparalleled ease of access to Public transport.

Education:-

In terms of Education, New York City has some of the best elementary and high schools and also institutes for advanced learning. The New York Education system is actually the largest in the whole of America with more than 1600 elementary and high schools. It also has several specialised high schools for gifted students. The city also has 120 Institutes for Higher Education and some of the most renowned institutions which receive the highest number of students from across the world are Columbia University, Barnard College, New York University and The Juilliard School.

Healthcare:-

In terms of Public Health Care, New York City has the largest municipal Healthcare system in the world. It includes 11 Acute or Intensive care hospitals, 5 Nursing homes,6 major Diagnostic and Treatment centres, and more 70 community-based health care centres for the working class and the economically unprivileged sections of the society. The most reputed hospital under this municipality is Bellevue Hospital where one can go for specialised and general diagnosis and subsequent treatment and emergencies as well.

Transport:-

New York also has one of the best and extensive Transport systems in the world with multiple modes of Public Transport. Some of the major modes of Public Transport are: New York City Subway- which is the world’s largest rapid transit system, City Buses which is the largest in North America, Staten Island Ferry which also boasts of being the busiest ferry system in the world, and the Yellow Taxicabs in which more than 12000 cars are functioning in the city.

[ad_2]

Source by Mayuri Ghosh