How Does Cooking Affect Spice Flavor?

[ad_1]

As you know, timing is everything when preparing a meal. The same holds true for spicing, that is, when you spice has an effect on the intensity of the flavor. Depending on the spice, cooking can increase potency, as you may have discovered when adding cayenne to your simmering spaghetti sauce. Or the flavor may not be as strong as you thought it would be. This is particularly apparent when adding herbs that are cooked over a long period of time, whether in a sauce or slow cooking in a crock pot.

Flavorings can be tricky when they come into contact with heat. Heat both enhances and destroys flavors, because heat allows essential oils to escape. The beauty of a crock pot is that slow cooking allows for the best results when using spices in a meal. The covered pot keeps moisture and steaming flavors and oils from escaping, and it allows the spices to permeate the foods in the pot. Using a microwave, on the other hand, may not allow for flavor release, especially in some herbs.

Common sense tells us that the baking spices, such as allspice, anise, cardamom, cinnamon, cloves, ginger, mace, nutmeg and mint can be added at the beginning of baking. All hold up for both short term and long term baking periods, whether for a batch of cookies or a sheet cake. They also work well in sauces that need to simmer, although nutmeg is often shaken over an item after it has been served. Cinnamon, as well as rosemary, will wreak havoc for those using yeast recipes and both are considered yeast inhibitors. Caraway seed has a tendency to turn bitter with prolonged cooking and turmeric can be bitter if burned.

Most herbs tend to be a little more delicate when it comes to cooking. Their flavors seem to cook out of a sauce much more quickly. Herbs include basil, chervil, chives, cilantro, coriander, dill (the seeds can handle cooking longer than the leaves), lemon grass, parsley (flat leaf or Italian is better for cooking), sage, tarragon and marjoram. In fact, marjoram is often sprinkled over a soup after serving and isn’t cooked at all.

The exception to these herbs is the hardy bay leaf, which holds up very well in a crock pot or stew. Oregano can be added at the beginning of cooking (if cooking less than an hour) and so can thyme. Often sustainability of an herb’s flavor has as much to do with the temperature at which it is being cooked, as with the length of cooking.

Onions and their relatives can handle prolonged simmering at low temperatures, but are better added toward the end of cooking. Leeks are the exception. Garlic may become bitter if overcooked. The milder shallot can hold up well, but will become bitter if browned.

Peppercorns and hot peppers are best added at the end, as they become more potent as they cook. This includes chili powder and Szechuan peppers. Here paprika is the exception and it can be added at the beginning of cooking. Mustard is often added at the end of cooking and is best if not brought to a boil.

Sometimes not cooking has an effect on flavor. Many of the herbs mentioned above are used in salads. Cold, uncooked foods such as potato salad or cucumbers can absorb flavor, so you can be more generous with your seasonings and add them early in the preparation. Freezing foods can destroy flavors outright, so you may have to re-spice after reheating.

Once again much of the cooking process depends on how long and how hot you cook your food. It also has a lot to do with how you like your food to taste. My Midwestern relatives can’t handle the hot peppers like we Southwesterners can, and I can’t use cayenne in their presence. As you can see, spicing is not objective, nor is it an exact science. But that shouldn’t prevent you from playing the mad scientist and delving into hands-on experimentation.

[ad_2]

Source by Linda Murdock

SunQuest 16RS Tanning Bed – Product Review

[ad_1]

Wolff tanning beds are some of the best in the world. The manufacturers the company uses specialize in the strict quality controls that has made them so famous, and you can get a Wolff tanning bed from just about anywhere. Available in commercial and residential models, they are moderately priced and the company stands behind their warranty.

Why the 16RS Tanning Bed is so Popular

The SunQuest 16RS tanning bed is one the most popular in Wolff’s product line. This bed works off of a standard 120 volt household current, allowing you to plug it into the wall without having to worry about needing a special breaker, fuse, or outlet. It has an easy to use digital timer – for up to twenty minutes of tanning time – that will keep you from being in the bed for too long, and the product itself is lightweight and very easy to use. It is also delivered to you, the customer, 95% pre-assembled.

The tanning bed is made in the unique and increasingly popular Bio-tech tunnel design. It places the tanner in the centre of the wide, curved bed, allowing for a more even tan and eliminating hot and cool spots within the bed. It is made of extruded aluminium on a steel mainframe and has specially glossed aluminium reflectors for maximum bulb covers. The exterior is the DuraMax T 2000 with a protective canopy grid. An optional acrylic canopy is available if the customer prefers.

The Advanced Features of the 16RS

This tanning bed comes with a quick clip T acrylic removal system, making it easy to clean and replace burnt out bulbs. In addition to the digital timer, it also includes a redundant back up timer system in case anything happens to the main one. Each bed is equipped an internal cooling system to keep the bulbs from getting too hot and burning out. There is also an optional body cooling fan available for purchase with the SunQuest 16RD that will keep you cool as you soak up the ‘rays’. This particular bed tans with sixteen 100-watt Wolff lamps, eight on the canopy, and eight on the bench. You will need approximately eight foot by eight foot of space to place the tanning bed in any room in your home, preferably close to a plug.

SunQuest 16RS’s Warranty

Wolff offers an eighteen month ‘Bronze Medal’ warranty on each of the SunQuest 16RS tanning beds. This warranty includes but is not limited to: 18 months on parts; ninety days on acrylics, lamps, and starters; thirty days on labour; and lifetime warranty from structural defects. Always make sure that your tanning bed comes with this warranty. Or, if you should happen to buy it used, try and find out exactly how much of the warranty – if any – is left.

Currently, the Wolff SunQuest 16RS can be purchased from around $1,999.00. Always use your tanning bed responsibly, keep it clean, and wear protective eye gear. With proper care and maintenance, your Wolff SunQuest 16RS tanning bed will last you a very long time.

[ad_2]

Source by Robert Newsome

Dishing Out The Best of Korean Food in New York

[ad_1]

Korean food has always been synonymous with Kimchi, Bibimbap and barbecues at the table. Over the last few years Korean culture has been building steam all over New York City. Many Korean restaurants in New York have set up shop in a tiny slice of the city called Koreatown. This jam-packed neighborhood boasts of the best spas, delicious Korean barbecues and mouth watering Korean food in NY.

Here you will find authentic Korean food options ranging from fine dine, fast food, casual dining and the best Korean delivery in NY. Restaurants in K-town have definitely gone and put Korea on the map with their take on traditional food as well as a modern approach, showcasing their culture on the plate.

If you are into karaoke, Koreatown is the place to be. After enjoying a few drinks along with Karaoke you can enjoy a great Korean meal at the restaurants in Koreatown. Many restaurants here have been in the business for more than a quarter century and are the go-to place for many Karaoke-ers. A few restaurants are open 24 hours and serve authentic Korean comfort food to its diners.

One of the most famous dishes among the locals here is the Seolleong Tang. It is a delicious bowl of broth, which is made by boiling ox bone for more than twelve hours to extract all the flavor, and is served with noodles and rice. Another delicacy here is the Kimchi (spicy pickled cabbage), which is made using high quality ingredients imported directly from South Korea. You can choose between the cabbage and radish Kimchi. The famous Korean dish is also incorporated in other dishes like the Kimchi Jeon (Vegetarian pancakes), which are a perfect takeout or delivery option.

If you are planning to visit this compelling neighborhood anytime soon, start your meal by ordering for a glass of soju. Soju is an alcoholic beverage of Korean origin that is traditionally made from rice, wheat and barley and is consumed neat. If you are not too adventurous you can choose from a list of beers, or try a ginger ale paired with their fried or steamed Mandu Dumplings. These are homemade pork dumpling that pair perfectly with soju, beer or ginger ale. If you do not have a big appetite, you can try out the Cured Salmon Bibimbap with ikura or try a traditional Korean dish called Bulgogi.

Some of the other dishes that are a must have at these Korean restaurants are Bossam and naengmyeon (cold noodles) which are a hit during the summers. You can also choose between their pork or beef barbecue dishes. If you are having trouble understanding the names of the dishes, ask your server, they will be more than happy to help you and take you through each dish.

Apart from being open 24 hours, all year around, many restaurants here offer weekly specials like ‘Happy Hour’ and ‘Taco Tuesday’, which are a treat for most of the regulars. If you are too lazy to visit this bustling neighborhood, some restaurants here offer an order online option. You can now enjoy delicious Korean food in the comfort of your homes with a click of a button. You can browse through the menu, select the dishes you like and have it delivered to your doorstep.

[ad_2]

Source by Peter D’souza

Phase Change Material (PCM) Eutectic Solutions Used For Passive Cooling

[ad_1]

Thermal Energy Storage (TES) may be considered as a useful tool to reduce the cooling load requirement by means of spreading day time loads over 24 hour period utilising the naturally occurring ambient temperature difference.

The night-time cooler ambient can be used to charge the latent heat capacity of various Positive Temperature Eutectic also called Phase Change Material (PCM) solutions between +4°C ( 39°F) and +117 °C (243°F) without using any refrigeration machinery by simply allowing the surrounding air to freeze these solutions. Later the stored energy by the Positive Eutectic, PCM Thermal Energy Storage can be released back to the occupied space during day-time to handle the heat gains.

This technique is generally called Passive Cooling and it may enable the charging process to take place by means of free cooling, i.e. without running the chillers and as a result becomes a very economical and environmentally friendly system. Furthermore, PCM energy storage opens new opportunities to explore heat balance for the existing and new systems, which could offer significant overall system efficiency improvements.

Alternatively, the sun energy during day-time is stored and later utilised during colder night-time to heat the space for a free heating as well as storing heat in the hot water circuits.

Privatisation has created a new kind of energy market whereby the period of energy usage and the type of energy used is becoming the main criteria for price structuring rather than overall energy consumption. Hence, cooling systems must be designed to provide sufficient flexibility for load shifting and a PCM Thermal Energy Storage technique can be considered as a useful tool to achieve this aim.

Building services must be designed to provide sufficient flexibility for load shifting and energy usage control in order to achieve the most economical operation. A PCM Thermal Energy Storage technique whereby “Storing High or Low Temperature energy for later use in order to bridge the time gap between energy availability and energy use” can be considered as a useful tool to achieve this aim.

Passive Cooling PCM Thermal Energy Storage (TES) benefits can also be applied for electronic chamber, shelter, telecom shelters, remote pump and electric control cabinet cooling for remote location whereby the lack of electricity eliminated the mechanical air conditioning or alternatively mechanical cooling free applications around the World.

These Passive Shelter Cooling systems can even operate in hot countries like the Middle East due to higher space temperature (45ºC / 113°F) requirements in comparison with Office Cooling. A PCM solution of 32ºC (89.6°F) is sufficient to maintain the room temperature below 45°C (113°F) by simply using the temperature swing between day and night time.

The same concept has also been successfully applied for cold storage transport applications using Eutectic beams. The majority of the perishable food must be chilled during transport but the cost of refrigerated truck restricts the use of transport cooling in particular in the third world where the biggest waste occurs. A PCM, Eutectic filled high ceiling beams can be simply charged using standard cold storage can keep the product temperature under control at a very attractive lower cost to install and run.

These passive cooling units can be supplemented using a very small refrigeration compressor or a chilled water circuit for lower temperatures but products like chocolate, bakery products and flowers can be easily maintained under control by simply charging these beams / containers over-night and utilising the stored energy during day-time transport. Furthermore, this concept enables the owners utilise their standard Lorries to be used as refrigerated trucks during harvest / peak season at a fraction of the cost for a conventional refrigerated truck.

HVAC / Air Conditioning PCM passive cooling concept offers mechanical refrigeration free passive-cooling by simply storing the night cool energy and releasing the stored cold latent heat capacity during day-time to keep the space temperatures under control. Low ambient temperatures coupled with free cooling offer a significant reduction of energy consumption relating to the cooling operation, which is in the region of 16-46 % depending on the type of passive cooling unit and location.

Based on the applied projects, ambient profiles in many parts of the world and associated feasibility studies indicates that PCM assisted Passive Cooling concept offers economical and very environmentally friendly cooling options. In any country whereby the night ambient does not allow being sufficiently low enough to charge PCM Thermal Energy Storage (TES) cells over-night, a supplementary dry cooler and / or small chiller can be added to top up the difference between the ambient and PCM temperature for an economical solution.

Modern society’s reliance on refrigeration and air conditioning indicates that refrigeration and the associated environmental issues will be with us for a considerable time and therefore one has to utilise existing and available alternative technologies with minimum usage of energy.

A Positive Temperature Eutectic ” PETES ” Thermal Energy Storage not only provides the end user with an Environmentally Friendly design but also the following additional benefits can be obtained:

o Reduced and No Refrigeration Equipment

o Capital Cost Saving

o Reduced Maintenance.

o Energy Cost Saving

o Reduced CO2 Emission

o Environmentally Friendly Installation

o Improved System Operation / Reliability

o Flexibility for the Future Capacities Changes

The temperature ranges offered by the proposed Phase Change Materials solutions utilise free ambient cooling, conventional chilled water temperature ranges for both the charging and discharging sides of the system. Hence, they can be applied to any new or retrofit application with minimal technical and economical impacts.

Finally, the possibility of Free Cooling Cycle TES system offer new horizons for designers to control the energy balance to match the load and electricity demand / consumption of the system as a whole.

[ad_2]

Source by Zafer Ure

Best Storage Method After You Buy Melanotan 2

[ad_1]

There are a couple approaches for the storage of Melanotan 2. Both methods are recommended to give perspective to prospective users. Pre-loading doses and storing them individually in the fridge or freezer offer insight as to how much product is being drawn. Often times folks get less than expected from a vial from measurement error. Drawing from the multi-dose vial is standard practice for the seasoned tanner.

Melanocyte stimulation takes very minute amounts (micrograms) of amino acid peptide hormones. Preserving and measuring Melanotan 2 is necessary for consistent results. Current data suggests low accurate dosing offers less permeation to peripheral areas melanocortins reach, including the brain.

When buying Melanotan 2 for the intention of tanning you must be aware that the product needs to be stored in the refrigerator. If not stored cold the ingredients within it can become unstable. For the product to remain effective it needs to be stored away from light and heat. Melanotan 2 is a very resilient durable peptide able to sustain plenty of abuse, however, it is no way to ensure consistency. Expectations can be controlled and trials become more reliable through best handling and practice.

Upon receiving the Melanotan 2 in powder form place in the refrigerator. Those vials which you don’t mix with bacteriostatic water for over a year should be placed in the freezer for long term storage. The reason for this is the frozen powder lasts for years before degradation issues occur. Place the vials in an area of consistent temperature and keep things dark. Light and heat are general areas to avoid to preserve the amino acid protein peptide Melanotan 2.

Pre-loading the product can be more cost effective as when the solution is completely measured out simply by having more certainty of dosage. The actual solution does not take too long to defrost when taken out of the freezer when stored long term. I like to place in my fingertips for 20-30 seconds until product turns to liquid. Another benefit of long term storage is the opportunity for bacteria to grow in the Melanotan 2 tanning injections is reduced. Stay safe, use best practice for Melanotan II results!

[ad_2]

Source by Chris T White

Affiliate Marketing Training for Newbie Affiliates

[ad_1]

The Internet is chock full of affiliate marketing training that promises overnight success. Many claim to have the one secret method to making money online. New article marketing methods and techniques abound throughout the internet that promises your financial freedom.

Searching for Affiliate Marketing Training

Before I decided to jump into Affiliate Marketing, I searched for and participated in various ways of making money and occupying my time. I tried direct sales, Multi-Level Marketing, retail sales, owned a retail store. They all required some level of knowledge. Knowledge that I didn’t have.

The same is true of affiliate marketing. There are many training courses that claim to offer unique material; but they all teach the same stuff. There are affiliate marketing training courses for identifying niches, search engine optimization, article writing, and list building, to name a few.

It is as if you are in the middle of the ocean with no compass or sextant. You have too many directions to choose from. You know that somewhere there is land, but you don’t know in which direction to steer.

So many training courses are out there that claim to be able to teach you how to make money online by using their approach. It frustrates and confuses you to the point of indecision.

Affiliate Marketing Training Options

Of course there many options available to you the internet marketer. There are many reputable experts and some not so reputable.

Just as there is no one magic bullet to making money online there is no one method of learning affiliate marketing. The following options may seem obvious to the experienced affiliate marketer. Nevertheless, new marketers are often overwhelmed by the many marketing training options available.

  1. Free training – Article directories often offer free training videos and courses. Some professional training sites also provide access to free training. The internet is another source. It is overflowing with free content. Forums are an excellent source of free training. Ask a question on a forum and you will get a myriad of responses.
  2. Professional training – If your budget allows, scour the internet and find a multitude of training programs and courses from one time purchase courses to monthly paid pay as you go subscriptions.
  3. Experience – Nothing, I repeat nothing, replaces experience as a learning tool. Do not be afraid to try something even though it may not work. You will learn what not to do. Too often, beginners freeze into inactivity because they do not want to make a mistake. Mistakes are the best teachers. As is often said, “Just do it.”

Due Diligence

Regardless of which option or options you choose, do your due diligence. As I said earlier, there are many experts that claim to have the answer to making money online. But, remember that they too were once beginners and that what they have to offer is most likely a spin on the same basic information about list building, article writing, search engine optimization, etc.

For myself, I do and did all three options. In the beginning, with a limited budget, I started with free training and was quickly overwhelmed by the variety of subjects to choose from: how to choose a niche, how to build a list, how to attract customers, on and on and on. I focused on one topic, article writing, and learned enough to begin doing it. Then, plunged into it and started making mistakes which were my greatest teachers – experience.

Do not become overwhelmed by your choices of affiliated market training courses. Choose one topic and go for it.

[ad_2]

Source by C. A. Perez

The Beginners’ Guide to DIY Home Solar Installation

[ad_1]

You may think that DIY home solar installation is too hard for you.

Perhaps you think it’s too technical or too big of a job for a do-it-yourselfer. The truth is that a DIY solar kit installation is possible for almost anyone. Besides, the long-term financial benefits and energy independence a photovoltaic system provides is more than worth the effort.

Why Switch to Solar Energy?

Homeowners have much to consider when evaluating the potential benefits of installing a solar system.

The biggest reason to adopt PV energy is the exceptional level of cost savings. Once your system is up and running, you will save on energy costs throughout the life of the system. And you can expect your PV panels to function at or near full capacity for 30 years or more!

But the benefits don’t just stop at the savings. Adding a solar panel array also:

  • Increases property values
  • Creates energy independence
  • Protects the environment
  • Sets a good example for your friends and neighbors

So, are you ready to get started?

Where to Begin with DIY Solar

A DIY solar installation requires a bit of planning. Find out:

  • Is there enough room on your roof or elsewhere on your property for an array?
  • Where is the most convenient place for you to place the array?
  • Does your roof or property have sun for most of the daylight hours?
  • Are there any obstructions such as trees or buildings that would block the sun?
  • Is your roof structurally sound? Can it handle the added weight of panels?

Once you’ve answered these questions and decided that solar energy will work for you, you’re ready to keep going. And don’t give up if you can’t unequivocally answer yes to every question. You can find any number of ways to work around shade or even a small roof.

Look at Your Electric Bills

Now, gather up your electric bills from the last 12 months to determine how much electricity you use during your highest months of usage.

Look for the kWh (kilowatt-hours) consumption numbers, and total them up for the year. Keep this number in mind so that you can refer back to it during the rest of your planning.

The size of the system you need will be determined by your highest monthly level of power use.

Select Your DIY Solar Kit Components

To build your own system you will need, at minimum:

  • Solar panels
  • A mounting system
  • An inverter

It’s important to note that an off-grid system requires a battery backup. This adds a level of complexity to the DIY process that most experts don’t recommend you attempt, unless you have direct experience.

The DIY Solar Installation Process

Professional installation is a large portion of the cost of a solar panel system, so doing the work yourself saves you big bucks.

It is extremely important, however, that you bring in a licensed electrician for the electrical connections. This costs more than doing the wiring yourself, but it isn’t an option in most states, unless you’re an electrician.

When it’s time to mount the panels, you must first prepare the mounting and racking system. These systems, especially SnapNrack products, are plug-and-play systems and are very easy to assemple.

The panels themselves are quite easy to mount, once the racking is attached to the roof. You simply need to lay the panels in play, connect together as you go, and ratchet them into place.

Now, have the electrician wire in the panel and voila! You should be ready to go!

Be sure that you purchase your DIY solar kit from a reputable and established source. This is the only way to ensure that your components come with a full warranty. Plus, a solar kit provider can be an invaluable resource for helping you design your system and for answering any questions you have throughout the DIY home solar installation process.

[ad_2]

Source by Jen Stott

Why Belize Should Be the Choice for Relocation

[ad_1]

For those who love nature and want to move to a country full of natural assets, there are many places around the globe. However, if you are looking at a place with some of the beauty of nature combined with the latest sophistication of modern technology, then one of the best places to move would be the country of Belize. The nature of relocation changes once you are planning around on shifting with your family or after retirement. You need to plan many things. What many places have to offer is fun but what you don’t realize is that with Belize, there can be much more to it than just spending time on beaches and amusements locations.

Location

An independent country, Belize is located in Central America and borders Mexico, Guatemala, and the Caribbean Sea. It has warm waters all year around. The flight from America to Belize usually takes around 4 hours. So if your friends or family are planning on paying you a short trip, then they can easily return within a short time.

Beauty of Belize

With crystal clear blue waters, Belize offers serenity and tranquility that is difficult to find in resorts all over the world. In fact, it has a diverse range of natural features that makes you want to explore the place more and more. Filled with natural assets, Belize comes out to be a popular attraction for those who want to relax, change place or enjoy.

Recreational activities

Belize does not merely offer a relaxation spot or crystal clear blue waters, it offers much more. There are many outdoor sports and activities for people of all ages. There are sports such as surfing, kayaking, fishing, snorkeling and many more. There are thus several attrition’s for the young and old alike.

Fishing and ocean

Fishing in the deep blue ocean offers a completely new experience. Just being near the sea provides a wonderful sensation. It makes you feel more healthy, active and energetic.

Adventures in Belize

For those looking out for adventures, Belize seems to be the perfect place. The second largest barrier reef on earth is located in Belize. It helps exhilarating your experience with diving and fishing.

You also get to do many things with not just the beaches but also with the jungles. Hiking is another activity in which you can engage. One of the most popular attractions is hiking in the rainforest.

There are many Mayan ruins to explore. Established over 4000 years ago, these Mayan sites are a popular tourist destination. They offer an exciting experience which you can relish for a very long time.

You may go on a canopy tour, and take part in caving, water sport or kayaking.

Along with all these adventures, there are many relaxing activities. The beautiful beaches of Belize offer a wonderful place where you can sit and relax while enjoying the sun.

[ad_2]

Source by Stephen Roshy

The Significance of Pipe Fabrication Process in Piping Industries

[ad_1]

The existence and importance of pipe fabrication is wide spread and crucial in several industry sectors including engineering and manufacturing. Industrial pipes are basic necessities required for common engineering purposes like construction, transportation, supply and so on. The essential need of this process and creation of code-compliant, standard pipes is vast in the industry. Hence, in the following paragraphs, let us crawl into the main highlights of fabrication and read about its various applications and the ways to avail it.

Fabricated Pipes have immense significance in industry sectors

Industrial growth and better performance empowers industrialization, refinement and better connectivity. It is important to manufacture and supply sturdy and high-quality pipes in the market so that the basic requirements of every facility, sector, or domain are fulfilled thoroughly. Indeed, the process of fabrication is important in order to achieve superior performance and growth in any industrial and manufacturing sect.

Generally, fabricated tubes and pipes play an integral role in many industries and applications for fulfilling variegated purposes. Some industries require large piping systems for setting-up complex applications. Industries like cement manufacturing, chemical processing, pulp and paper processing plants, oil refineries, and many more implement piping systems for transporting materials from one place to another, store or carry out industrial specific operations as per different requirements. Besides these different industries, there are other sectors too that implement the essential use of fabricated pipes and they are namely, steel mills and paper mills, nuclear and fossil fuel plants, semiconductor, chemical processing plants, pharmaceutical sector and more.

The need for industrial sturdy pipes also arises when you need to erect a structure of build a facility that can carry out certain operations for transportation, storage, and connectivity. In all these situations, the first step is pipe fabrication. Therefore, with its immense need and requirement in every nook and corner of industrialization and development, the usage of piping is not limited throughout the world.

Nonetheless, the overall design, use and requirement of pipes depend on the nature of the applications. Fabrication is the core, rather the bases of involving various procedures that can help you in finding out the exact need of wide engineering processes. This need can be easily solved if you avail the pipes from dedicated and authorized piping firms.

Approach the right fabricator

To achieve a reliable pipe fabrication project in order to fulfill your requirements, you need to focus on specialized enterprises that dedicatedly provide piping lines, fabricating pipes, and medium-to large sized piping systems on the market. It is advisable to look out for single-point sources and firms that offer pipe and pipe-support fabrication services because they assure the highest level of precision and code-compliant products for the most demanding fabrication projects. They are trusted and reliable, and also offer products at competitive prices.

[ad_2]

Source by David Lophez

Online Incorporation and LLC Formation Services – Advantages and Disadvantages, Pros and Cons

[ad_1]

Online incorporation services tout easy, fast, and cheap online incorporation and limited liability company (LLC) formation services. Examples include LegalZoom.com, MyCorporation.com, and IncorporateTime.com. Storefront and virtual paralegal services such as We the People and those found in the legal services section of your local craigslist also offer similar services. Their web sites and radio and TV sales pitches indicate that forming a corporation or LLC is as quick, easy, and inexpensive as filling out an online questionnaire and paying a fee of $100-150 for the completion of the paperwork and the filing of the documents with the secretary of state (plus the filing fees charged by the state). This article reviews the advantages and disadvantages of these services overall – for specific reviews of a particular provider, you should look elsewhere (and preferably to those with direct experience using the service, as well as at least a year of business operations thereafter).

No legal advice

In the fine print, many document preparation services state they are not law firms, cannot provide legal advice, and recommend that you consult an attorney for legal advice. Here’s a word for word example from one web site: “This site is not a substitute for legal counsel…. You should consult legal counsel to determine applicable law for your situation.” And from another: “[Our document preparation service] is not a substitute for an attorney or law firm.” Only licensed attorneys can practice law and provide legal advice to clients, so these firms are wisely protecting themselves by making it clear that they are not in the business of providing legal advice; they are in the business of preparing whatever forms or filing you tell them to. Thus, the computer programmer’s old adage, Garbage In, Garbage Out, applies. If you tell them to form a Nevada LLC, when you really need a California S corporation, they will in all likelihood produce a technically sufficient LLC, but it won’t meet your actual business legal needs. Likewise, if you choose not to elect S-corporation status, and end up paying higher taxes as a C-corporation, this is not their fault; they are counting on you to know what you need, or to have consulted a lawyer and/or tax accountant before coming to them.

Many incorporation services would apparently seem to remedy this situation with lengthy FAQs and learning centers, but, frankly, a few minutes or even a few hours of research is not a substitute for a lawyer’s college degree, three years of law school, and additional on-the-job training and annual continuing legal education. Any paralegal or incorporation service whose employees do provide legal advice is engaged in the unethical practice of law without a license, a crime in most jurisdictions, and their legal advice, for more reasons than one, should be taken with a grain of salt. Better yet, terminate your relationship with any such person immediately.

The other ‘remedy’ is to portray incorporation as a one size fits all, cookie cutter purchase, rather than explaining the reality that can be summed up the quote sometimes heard in law school, “The general rule applies to no one in particular.” In other words, your circumstances and needs are not those of your friends, neighbors, or other online entity formation customers.

Other Legal Issues

Attorneys will focus not just on forming an entity you have ordered them to, but in taking a step back, assessing your overall business plan and goals, and making sure the legal structure takes into account your particular circumstances, rather than assuming you and your business are exactly the same as the next guy and his business. They will also at least point out, and suggest options for best addressing, legal issues that arise tangentially to forming a corporation or LLC. Such issues that the average incorporation service customer may be blissfully unaware of include securities laws compliance, promissory notes, trademark and service mark issues, and employee and independent contractor law. (Tax issues are also inherent in incorporating, so working with a CPA or accountant is something I always recommend to clients before and after incorporating.) Agreements typical of new corporations or existing business which are growing and have decided to incorporate include employment agreements, independent contractor agreements, supplier agreements, web site terms of use and privacy policies, and shareholder buy-sell agreements. All of these should be customized to your needs, not fill in the blank forms, just as corporate bylaws and LLC operating agreements should be customized, not one size fits all.

Lack of Follow-Through

A good business attorney will also assist you in following through in the formation of your corporation or LLC. By this I mean making sure the meeting minutes are appropriately customized to your needs and the corp. or LLC’s formation documents are actually completed, signed, shares are actually issued to shareholders, and appropriate federal, state, and local filings are made. After having reviewed numerous incorporation service companies, usually a year or more later after problems have arisen, but also often times in the course of transactions such as sale of the business or part of it to a new shareholder, member, or partner, I have yet to see a company that was correctly set up. I can say the same of do-it-yourself incorporations, where the owner(s) didn’t hire anyone and did it themselves. In most cases, the articles of incorporation (for LLCs, the articles of organization) have been completed and filed in an adequate, if not optimal, manner, and the bylaws or operating agreement is likewise present. However, such documents are generally never executed – they just sit on the shelf in a binder, as they have since they were mailed out by the incorporation service, and thus without any force or effect whatsoever. Frequently, they contain numerous blanks that the owner was supposed to fill in, but didn’t because they didn’t know how to, or just never got around to it.

These defects are not the fault of the incorporation service per se, but they are indicative of the different level of service provided by such companies, in comparison to an attorney. Such lack of completion can and does lead to problem later, however, because the company’s limited liability status and good standing with the state can be jeopardized by missing or incomplete corporate documents, or by failure to create annual minuets and file initial and annual state level filings. Difficulties also occur when disputes among partners or co-owners later arise, and upon review of the bylaws or operating agreement, the parties find that the documents were never signed (and thus may not control), that they lack buyout procedures, or that they are vague or silent on how to handle disputes. It goes without saying that most of these disputes are much more costly to resolve later, once the proverbial horse of improper documentation and agreements has left the barn.

Hidden fees

The main benefit of incorporation services is costs savings; they charge less than attorneys do. However, the actual fees charged by incorporation services often ends up being as much as two or three times higher as they low rates they advertise, once such “add-ons” (which in many cases are needed to achieve your legal aims) as name reservations, corporate minute books, expedited or rush service, EIN numbers, S-corp election, first meeting minutes, and initial statement of information, sales tax reseller’s permit, business license, or other state or federal filings are made. So be sure to check what a complete package costs in making comparison amongst various providers and versus law firm fees. Some services I’ve seen on craigslist.org offer rates so low, they do not even account for the minimum level of costs that must be expended to properly set up a company! (E.g., $125 including costs for a California incorporation – the government fees alone are at least this high, let alone any third party service fee.) In many but not all instances, law firms offering flat fee incorporations do not have hidden fees.

In any case, the important consideration here is that incorporation service prices cannot and do not include legal advice on the incorporation process or related legal issues, hand-holding, referrals to other professionals such as accountants and insurance agents, or follow-through to ensure that the business entity is actually implemented correctly. Upon seeing all the work that goes into an incorporation or LLC organization, the most common remark from my clients is not, ‘That was easy; I should have used an incorporation service, saved your legal fees, and done it myself.’ Rather, it is, ‘I can’t believe some people try to do all this themselves!’ You should keep in mind the difference in the level or services provided when evaluating price, be on the lookout for hidden or additional fees beyond the base rate, and realize that if you are choose to select an attorney over an incorporation service, you are paying not only for that attorney’s time and end work product, but also his education, experience, skill, and legal advice and counsel for your business.

Relationship with a lawyer

In deciding to go it alone, you should keep in mind that sooner or later, if your business grows, you will need a business attorney. It may be more prudent to establish that relationship now via an incorporation and set yourself up for future growth and success, rather than wait until a legal emergency arises, only to find you don’t know any attorneys, or that the attorney you do retain finds that there are numerous steps you could have taken in the past to avoid current fees, taxes, problems, and disputes.

The fact that these problems don’t become apparent until months or years after the company’s formation (especially if professionals such as attorneys and accountants are never hired and thereby given the opportunity to review the company and spot issues) means that many customers of incorporation services are initially well pleased with the service they have received. If you don’t know what you didn’t get, you have no reason to be unhappy about; instead focusing on the money saved now.

In my experience, rarely does money saved on legal services now pay off in long-term savings. More often, it’s the old, pay now, or pay (more) later situation. Some errors, such as choice of entity decisions that were not tax favorable, cannot be undone, they can only be changed going forward. Likewise, after a shareholder or partnership dispute has arisen, it’s usually too late for proper buy-sell provisions in the bylaws or operating agreement, a separate buy sell agreement, or an arbitration clause. If you don’t have enough money to afford an attorney at the outset, perhaps you and your partners should consider committing additional funds to the enterprise, utilizing loans or credit cards to access additional funds, or wait until more financing can be accumulated or obtained, before proceeding in a less than optimal way. Most entrepreneurs are convinced of the future growth and profit prospects of their companies; thus, it is surprising they often don’t follow in the footsteps of other successful enterprises and allocate appropriate funds for legal services. The adage, “Failing to plan is planning to fail” applies here.

A good business attorney will also be able to provide referrals to reliable accountants, insurance agents, and others services new businesses are likely to need.

Volume business

Incorporating services are sometimes called incorporation mills. By their very nature, they are in a volume business; they cannot charge low prices and provide personalized attention or service. In general, they make their profits by selling a non-customized or a minimally customized product over and over to as many customers as possible. Law firms, on the other hand, provide customized legal advice and services to each client on an individual basis. Law firms can handle unusual capital, profit, loss, or other allocation issues that fully and correctly utilize corporations and LLCs, and advise when such use is appropriate and when it is not. Incorporation mills will, for the most part, sell you whatever you ask for; it’s your responsibility to determine whether you are ordering the right product from them.

But aren’t you, as a California incorporation lawyer, biased?

That’s certainly a legitimate question, and I obviously have a strong opinion on the matters discussed. It’s up to you to take to heart or disregard the opinions and advice in this article, but I would answer it this way: Because I am a business attorney, I have seen the result of using these services in a way most lay people would not, and as a result cannot recommend that most people use an incorporation service. And although incorporation legal services is part of my business law practice, I would encourage most readers to use an attorney of their choosing, in their state – it need not be me and obviously I don’t benefit from you using another attorney any more than I benefit from you using an incorporation service. In fact, incorporation services are probably in the long run good for my practice; they provide a steady stream of repair work and dispute resolution for me, that typically cost $1000s more than my flat fee incorporation services.

Summary and Conclusion

In short, comparing incorporation services to a business lawyer is an apples to oranges comparison. One option provides more services and costs more; one provides less and costs less. Neither is a “rip-off” or the definitive solution for everyone. You are more likely to get things right by choosing either than choosing neither and going it alone. The lawyer is licensed by the state to provide legal advice, is subject to numerous ethical rules, forms an attorney-client relationship with his clients, and keeps up to date on changes in the law through mandatory continuing legal education. The incorporation service simply executes on your instructions, no advice, no hand-holding, no legal review of your situation or legal needs. If your instructions do not comport with what’s best for your situation, then your result will be less than optimal.

There may be a small group of people who know what they need, and how to do it, but just lack the time, and who are thus well served by incorporation services. (Ironically, most of these people probably realize the value of an attorney’s input and would generally hire one to take care of their legal needs, while spending their own time on what they do best, improving their business. This explains why I have business entity formation clients who are attorneys and law firms!). Or who have been advised by their accountant to form a particular type of simple entity (simple being defined as an entity to be formed in their home state jurisdiction and with only one owner). But, in my opinion, the vast majority of potential incorporation service customers would be better served by investing an additional $500 or so to have their entity selected, formed, and set up correctly, with all of their questions answered along the way, with due attention to related legal issues, and to establish a relationship with an attorney for ongoing or future legal services.

[ad_2]

Source by Jonas Grant