Air Conditioning Installation – Hire an Expert to Ensure Safety

[ad_1]

Electronics perform essential functions in your life. Owning a television, a refrigerator and an air conditioner is considered normal in every household. Although ubiquitous equipment, very few people possess the knowledge to install and repair them.

Of all these, air conditioning installation requires the most training. That’s why most rely upon professional HVAC professionals for installation and repair. Finding a dependable HVAC company can be tricky. An air conditioner keeps your home comfortable during the warmest parts of the summer. If it is not installed properly in the first place, it can cost you almost the double amount to get it reinstalled. A lot of people hire air conditioning experts to ensure its safe and correct installation. Following these tips can help you avoid the mistakes that a lot of people make while installing.

1. If you are moving into a new house and your building contractor insists on installing your air condition for you, make sure that he brings in an expert from a qualified HVAC company to do the installation. A lot of times, people leave it to the contractors to get it done and they don’t hire HVAC experts for the installation. In such a case, you might face problems after you have moved into the house. A qualified HVAC installer adjusts and tunes your air conditioner according to the manufacturer’s specifications, thus reducing the chances of breakdowns.

2. If you are renovating your house, you may change the layout, the usage of the space or even use a different material for construction. All this will affect the size of the unit you should buy for your house. Most people avoid this detail and simply replace the old unit with a new one, possibly of the same company and the same size. That unit may not have efficient energy as you might want it to be or it may not sufficiently cool your home. It is better to take an expert’s advice before installing an air conditioner to avoid these problems.

3. If you simply reinstall the old air conditioner or get the very same model without looking around for more options, you may be missing out on some really improved versions of these units that would enhance the comfort of your space. With the innovation in technology, much more sophisticated HVAC technology units are available in the market. You would know about all of this had your hired an expert to guide you through buying and installing.

4. The biggest mistake of all is to hire a company that only installs the air conditioners but does not repair them. It is very important to choose a HVAC company that not only installs your new ac units, but can also service it when required. Once the ac unit is installed, make maintenance your priority. Otherwise your unit will break down more often.

Installing an A/C system may seem like a trivial thing, but if not done properly, it can cost you quite a bit of money to set it right. To avoid all the trouble, hire a true HVAC expert in the first place who not only installs your unit but also offers its maintenance.

[ad_2]

Source by Hara E Ford

Features And Beneficial Uses Of Radial Drilling Machines

[ad_1]

A radial drilling machine is a tool that is designed to drill holes into very strong materials which can seldom be performed by ordinary drilling machines. These tools can make holes of different sizes too. Compared to the conventional machines, these tools offer a greater precision and stability.

These devices are widely used in metal fabrication industries as it offers precision to bore holes in different sizes on tough metals. As most of the conventional drilling machines are quite unstable, it can seldom offer the required stability and strength. These machines are often used with a CNC router which further simplifies its usage and efficiency. CNC controlled devices can be operated with experience as the tool is capable of a wide variety of tasks.

Some Important Components:

Arm Clamp: It is mainly used to secure the arm and column in place.

Table: It is the place where the materials are placed and fed to the machine.

Radial Arm: The drill head assembly can be moved to any extent with the use of this arm.

Switch: It also includes a switch which turns the machine on and off.

There are many advantages of using the radial drilling machine. It is quite compact in size which enables quicker use and operation. It is also known to be one of the most versatile machines as it can easily countersink, bore holes and even grind off particles from large blocks.

The device has a long arm which can be repositioned as required by the user. It is also possible to manoeuvre large pieces of materials with the use of this machine. These devices are designed to perform most of the task efficiently so less effort is required by the user. It can also perform a wide variety of actions as the arm can extend to a considerable length.

It is also considered to be quite rugged and durable. It has the ability to perform various functions easily and quickly. The device is resistant to adverse conditions. These drilling machines are used in printing industries, automobile and engineering industries for a wide variety of applications.

Today there are a large number of online dealers and sellers who showcase a huge range of these machines. Most of these devices include distinctive features and offer flawless performance. There are both manual and automatic or electric machines which are used largely to bore holes into strong metals.

There are many online dealers who offer customized machines to the customers based on specific requirements. These machines can be used for spot facing, milling and drilling, boring, reaming, honing and counter boring. Most of these devices showcase unique performance and extreme durability as it is made with high quality components and advanced technology. As these machines are made available with different specifications, it is important to purchase devices which are suited for individual requirements. Some of these online stores offer these devices at unbelievable price rates. It is also possible to order customized machines from online stores.

[ad_2]

Source by Anamika Swami

Benefits of Tax Preparation Services

[ad_1]

The process of preparing for tax filing and clearance is very cumbersome, which is one reason a lot of business owners consider tax preparation services. There are a number of service providers accessible these days. Conventional methods are no longer being used to prepare for tax, as the protocol is now redundant and takes up a lot of time. With sophisticated software and easier methods of calculations, it is now easy to get your taxation procedures completed within a very short span of time. Earlier it was a practice to get the work done in-house itself, but now taxation work is being outsourced, which means that another company does the job of preparing documentation and verifying figures for your tax payments and rebates, instead of you.

If as a business owner, you are looking towards maximizing profits of the company and want to maintain efficiency, then the best thing to do is to outsource services for tax preparation. Operation costs can be minimized by outsourcing these services. The best software for preparing tax is used by most of the offshore companies, and they guarantee accurate calculations arrived at efficiently and quick. The methodologies deployed are the finest in the industry, with no room for miscalculation. These companies meet the deadlines specified, which is why they are banked upon heavily. They are reliable and efficient and offer the services of well experienced staff. The services are accessible 24×7, for you to scrutinize and be a part of when and as you wish.

A good taxation service company provides proper feedback and reports erroneous entries so that you get an opportunity make necessary changes and developments for the future progress of the organization. Many organizations make an effort to train their staff on the job, but a whole new department and recruits take up precious business time and money in the bargain. The employees already present may not be able to handle all the complexities of such a job hence it is best if necessary steps are taken or to hire taxation preparation services in time. Experts, who are well-trained in the field of taxation, are on the job to help the company come through the taxation process effortlessly, year after year. Though, this may cost the company some amount, every dollar is worth it, especially when you have hired the best professional services available. All it takes is scouting the market and identifying the right offshore outsourcing service provider.

[ad_2]

Source by Benjamin Friedman

Hyper-Collaborative Modern Workplace: Back to Basics

[ad_1]

Today, the modern workplace has gone through a lot of positive changes. Due to the changing demographics and dispersed workforce across the planet, the definition of workplace collaboration has also been changed. These days, face-to-face meetings have now been replaced by internet-enabled video conferencing and real-time messaging. In this article, we are going to talk about the hyper-collaborated modern workplace. Read on to find out more.

Nowadays, there is a lot of competition between organizations. Therefore, they must provide their workforce with a collaborative environment to stay ahead of the competition and keep talented employees. Aside from organizational culture, there should be necessary communication devices and collaborator software to create a hyper-collaborator workplace.

Opting for the best solutions based on your usage model

Since there is a lot of communication tools, such as cloud-based file sharing, video as a service (VaaS), and conventional telephone, it is difficult for organizations to opt for the best solution. If you are in this situation, we have some tips for you to go for the most appropriate solution. Given below are some of the tips.

For large groups, whiteboards can be an ideal solution. With these solutions, participants can edit and view content at the same time. Apart from this, they can distribute, and transcribe content to touch mobile PCs.

Small teams can use wireless solutions that allow them to connect to conference room projectors. Therefore, mobile computers can create a small network for sharing work.

One-on-one collaboration can come up with virtual meeting rooms for quality audio and video conferences. They can do so with the help of touch mobile devices. Therefore, they can edit and share documents without any problem.

Successful transformation

In the United States, many institutions have created student-teacher collaboration tools to cover the needs of online and overseas students. If there is no collaborative strategy, the heads of University departments can go for the technology gap and buy collaboration tools.

Try your desired systems before implementation

Technological tools and solutions can help you enjoy a lot of benefits. Apart from this, you need to make sure that these technologies are compatible with each other. On the other hand, if they don’t sync properly, they can create a lot of problems for it professionals. As a result, there can be a lot of organizational inefficiencies and cyber security loopholes.

In other words, organizations need to test these tools before implementing them. By trying out different solutions, we can go for the best one. Besides, they also need to compare the user-friendliness of these solutions.

The idea is to make sure that these systems make it easier for the entire team or students to collaborate with each other without any problem. This is how they can get the most out of their efforts. And this can also so make the organization more efficient in more ways than one.

Long story short, this was a brief introduction to the hyper collaborated modern workplace. If you have never tried this system, we suggest that you consider them today.

[ad_2]

Source by Shalini M

Quoting A Price – Legally Binding

[ad_1]

How often have we consumers and buyers found ourselves in negotiations for work or services at the receiving end of a quote? ‘More often than not’ would be a common response and observation. First time home buyers for example love shopping around for quotes before taking the plunge. After buying the perfect house, painters and contractors are brought in. These service providers will usually make a quote before offering their services. This has become the norm.

Receiving a quote is a comforting thought. It offers choice and security. It allows parties to make informed decisions based on their income. However a simple quote can turn into a contract in some situations. The recent judgment delivered by the Supreme Court of New South Wales in Megalift v Terminals [2009] NSWSC 324 warns parties to exercise care and diligence when negotiating a quote as an innocent conversation could turn into a contractually binding offer.

In the above case, Terminals had used the services of Megalift. The latter party was required to discharge a huge storage sphere from a barge on the former party’s premises. It was later discovered that the sphere could not be discharged without excavating some of the land. This miscalculation or oversight caused inconvenience, delay and added costs. Megalift, having provided an unexpected service, not initially quoted for, claimed the extra amount. Terminals on the other hand counter claimed for the excavation costs.

On 28 April 2006, Mega lift had sent a revised quotation to Terminals. Subsequently, both parties entered into a contract on 1 May 2006. The Supreme Court was faced with the question of whether a contractual relationship existed prior to 1 May 2006.

The facts of this case are unique in that two agreements allegedly existed. Mega lift disputed that its first letter dated 21 March 2006 was an offer capable of acceptance. According to their understanding of quotes and legally binding contracts, this was simply a ‘quotation’ or ‘budget offer’. Terminals treated this as well as the purchase order as a contract, on 4 April 2006. Based on their comprehension of legal obligations, they held Megalift responsible for breaching the first agreement.

So, which agreement was legally binding? Justice Bergin ruled in favour of the first one (4 April 2006), where an offer was made and accepted. Both parties were already in negotiation, discussing terms and details such as transportation and delivery. These conversations involved quotations and although no fixed price was agreed upon, it was nonetheless a contract which was legally binding. Moreover, her Honour disregarded the quotation for the purpose of a budget only. This did not prevent the parties from contracting.

How did the court reach this conclusion? A contract requires an offer and an acceptance. However, are price quotations offers and if they are, when do they become legally binding? Each case should be decided on the facts. The question is one of objective intention of the parties involved. “We quote you” has been held not to be an offer but “shall be happy to have an order from you to which we will give prompt attention” was held to be an offer in a Canadian case. In Canadian Dyers Association v. Burton it was further stated that – “In each case of this type, it is a question to be determined upon the language used, and in light of the circumstances in which it is used, whether what is said by the vendor is a mere quotation of price or in truth an offer to sell. “

The commercial context of such negotiations as well as the circumstances in which quotations are discussed, are important considerations. A way to avoid being bound by a mere estimate is to ensure that the quotation clearly states that it is not a binding offer. The next time you make a quote or accept one, just make sure you expressly convey your intention and desire to be bound by the quote.

[ad_2]

Source by Kyle Kimball

Pike Fishing in Ireland

[ad_1]

You Can Do Some Of The Best Pike Fishing In Ireland

When pike fishing in Ireland you have the best of pike fishing Lakes to choose from. Ireland has fishing Lakes or Loughs in every County, which you will find pike in the majority of them. At every Irish Lake you will find beautiful scenery, whether its a big Lake or small, you will be sure to find a Lake to suit you. In most of the Lakes in Ireland you will find pike, perch, roach and hybrids, then the rest of them you will find rainbow and brown trout.

Great Lakes To Catch Big Pike In Ireland

Best Pike Lakes in galway: lough corrib, lough mask, lough coolin, lough cutra, lough inagh, loughrea lake, mountbellew lake, ballynakill lough, lough derg, lough na hinch.

Cork: The Inniscarra Dam on the River Lee in is full of big Pike.

Cavan: lough ramor, drumkeary lake, skeagh lake, castle lake, galloncurra lake.

Longford: from Rooskey to Lanesborough holds excellent stocks of pike in its weedy waters.

Dublin: Blessington Lake has some big pike in it, but you do need a permit.

Pike Eat Everything They Can Get There Teeth On

Pike eat everything in Lakes and Loughs, from trout, perch and roach, and smaller pike. Some times if you catch a pike, you might see another pike come up and grab the one you are reeling in on your line. If you still get your pike you had on your line, you will see a chunk gone out of its back or fins. This happened to me a good few times fishing in Ireland. Pike are the biggest predators in the Irish Lakes and Loughs, They grow huge in Ireland, they grow anywhere from 3lb to 35lb, with some 40lb being caught over the years. One of the best fishing places in Ireland is Lough Acalla in Galway, i have caught over 30lb pike there year after year spinning and dead bating.

Ways For You To Catch pike

There is a number of ways you can catch pike from wobbling to spinning, fly fishing to dead baiting. If you go spinning for trout all the time your sure to come across a pike. There is no season for pike fishing you can fish all year round for them. In the winter months i would prefer dead baiting, and spinning does work quite well once you have gloves on your hand your sorted. Pike move around Lakes and Loughs in the winter looking for food because all the smaller fish hibernate. Spinning is great all year round, there is nothing like a 30lb pike grabbing your rod when your not expecting it. You get the trill of your life, and a nice fight. Pike love to catch fish moving around the water, its what they do best.

[ad_2]

Source by Stephen A Reynolds

Storage Beds With Drawers Pros and Cons

[ad_1]

People who love neat and spacious bedroom prefer to buy storage beds with drawers due to its ability to store stuff and save space. You room can look at its best when clutters are removed and you can freely design it based on your preferences. Although there are lots of advantages in storage beds, you also need to be aware that they also carry disadvantages.

If you’re planning to buy storage bed, check these pros and cons first before finally deciding to get one.

Pros

1. You can save a lot of space-saving space is one of the best assets in storage beds. Most manufacturers will make use of almost all space of the bed just to give you a more organized compartment to store your valuables. So much like a cabinet in a form of bed, it has drawers that you can just easily pull to open.

2. Neat and Spacious Bedroom-Unlike the typical beds like those with spring mattress in which you cannot store whatever stuff underneath, storage beds with drawers do the job of storing efficiently. Since you can store as much as you want, you’ll have a clean and neat bedroom and your space will be widened. By then, it would be easier for you to layout the bedroom based on your preferred design, and cleaning won’t be an issue since your dust-collecting things are stored in a much sealed storage-underneath your bed.

3. Impressive Design-Simplicity is beauty! Most storage beds are topnotch when it comes to the design. Upon the first look, you’ll see how simple and elegant it is and most of the time you wouldn’t notice the drawers that underneath. Its solid built makes it an ideal bed for small rooms and since it comes with wide variety of materials-wood, plastic, metal, or mixed, it would be easy to find the one that matches your taste.

Cons

1. Too Bulky and Heavy to Transport-this is one of the biggest issues in buying a storage bed. Due to its solid built-with all the drawers and compartments, it’s too heavy to transport that it won’t easily slip through doors. So it won’t be ideal for those who are living in condominiums, apartments or for people who tend to move from one place to another.

2. “Jack of all trade-master of none” – This is somewhat true in some cases like the storage bed. Since it’s like an all-in-one product, you wouldn’t expect that its use as a bed and as a drawer has the same level of excellence when it comes to quality. There might be glitches on the knobs, drawer closure and so on.

Based on the pros and cons, we can see that the advantages outweigh the disadvantages of storage beds with drawers. However, it is in our own discernment if it’s ideal for our home or not, especially if we are living in a high rise and closed-space area (like apartments), where it’s hard to transport the bed.

[ad_2]

Source by Carlos Alonzo

10 Effective and Easy Steps for Clean Room Design, ISO 14644

[ad_1]

In clean room design in which we establishing & maintaining an environment with a low level of environmental pollutants such as dust, airborne microbes, aerosol particles & chemical vapors. Designing the such sensitive environment like the clean room is not easy thing but below 10 steps definitely helps you and define the easy way to design it.

Most of the clean room manufacturer processes required the extremely stringent conditions provided by the clean room. Clean room design in each proper orderly way is very important, since cleanrooms have complex mechanical frameworks and high development, working, and vitality costs. Below steps present evaluating methods and cleanroom designing, people/material flow in factories, classification of space cleanliness, space pressurization, space supply airflow, space air exfiltration, space air balance, variables to be evaluated, selection of mechanical system, calculations of heating/cooling load, and requirements of support space.

1. People/Material Flow Evaluation Layout:

It is essential to assess the material and people stream inside the cleanroom suite. All critical processes should be isolated from personnel access doors and pathways, this help cleanroom labourers because they are a cleanroom’s biggest sullying source.

There should be strategy for critcal spaces that is the as compare to less critical spaces the most critical spaces should have a single access to prevent the space from being a pathway to other. Some pharmaceutical and biopharmaceutical processes are susceptible to cross-contamination from other pharmaceutical and biopharmaceutical processes. For material process isolation, raw material inflow routes and containment, and finished product outflow routes and containment the process cross-contamination needs to be carefully evaluated.

2. Indentify classification for Space Cleanliness:

It is very important to know the primary cleanroom classification standard and what the particulate performance requirements are for each cleanliness classification at the time of selection. It is very important to know the primary cleanroom classification standard and what the particulate performance requirements are for each cleanliness classification at the time of selection. There are different cleanliness classifications (1, 10, 100, 1000, 10000, and 100000) and the allowable number of particles at different particle sizes which provided by the Institute of Environmental Science and Technology (IEST) Standard 14644-1.

3. Indentify Pressurization for Space:

Keeping up a positive air space pressure, in connection to abutting dirtier tidiness order spaces, is basic in keeping contaminants from invading into a cleanroom. It is extremely hard to reliably keep up a space’s neatness order when it has unbiased or negative space pressurization. What should the space weight differential be between spaces? Different examinations assessed contaminant penetration into a cleanroom versus space weight differential between the cleanroom and connecting uncontrolled condition. These examinations found a weight differential of 0.03 to 0.05 in w.g. to be viable in diminishing contaminant invasion. Space weight differentials over 0.05 in. w.g. try not to give considerably better contaminant penetration control then 0.05 in. w.g.

4. Indentify Supply Airflow of Space:

The space cleanliness classification is the primary variable in determining a cleanroom’s supply airflow. Looking at table 3, each clean classification has an air change rate. For example, a Class 100,000 cleanroom has a 15 to 30 ach range. The cleanroom’s air change rate should take the anticipated activity within the cleanroom into account. A Class 100,000 (ISO 8) cleanroom having a low occupancy rate, low particle generating process, and positive space pressurization in relation to adjacent dirtier cleanliness spaces might use 15 ach, while the same cleanroom having high occupancy, frequent in/out traffic, high particle generating process, or neutral space pressurization will probably need 30 ach.

5. Indentify Air Exfiltration Flow of Space:

The larger part of cleanrooms are under positive weight, bringing about arranged air exfiltrating into connecting spaces having lower static weight and impromptu air exfiltration through electrical outlets, light apparatuses, window outlines, entryway outlines, divider/floor interface, divider/roof interface, and access entryways. It is critical to comprehend rooms are not hermetically fixed and do have spillage. An all around fixed cleanroom will have a 1% to 2% volume spillage rate. Is this spillage terrible? Not really.

6. Indentify Air Balance of Space:

The larger part of cleanrooms are under positive weight, bringing about arranged air exfiltrating into connecting spaces having lower static weight and impromptu air exfiltration through electrical outlets, light apparatuses, window outlines, entryway outlines, divider/floor interface, divider/roof interface, and access entryways. It is critical to comprehend rooms are not hermetically fixed and do have spillage. An each fixed cleanroom will have a 1% to 2% volume spillage rate. Is this spillage terrible? Not really.

7. Assess Remaining Variables:

Different factors waiting to be assessed include:

Temperature: Cleanroom specialists wear frocks or full bunny suits over their normal garments to lessen particulate age and potential tainting. As a result of their additional garments, it is critical to keep up a lower space temperature for specialist comfort. A space temperature extend somewhere in the range of 66°F and 70° will give agreeable conditions.

Humidity: Due to a cleanroom’s high wind stream, a vast electrostatic charge is created. At the point when the roof and dividers have a high electrostatic charge and space has a low relative dampness, airborne particulate will join itself to the surface. At the point when the space relative dampness expands, the electrostatic charge is released and all the caught particulate is discharged in a brief timeframe period, causing the cleanroom to leave detail. Having high electrostatic charge can likewise harm electrostatic release delicate materials. It is vital to keep the space relative moistness sufficiently high to lessen the electrostatic energize construct. A RH or 45% +5% is viewed as the ideal stickiness level.

Laminarity: Very basic procedures may require laminar stream to lessen the shot of pollutes getting into the air stream between the HEPA channel and the procedure. IEST Standard #IEST-WG-CC006 gives wind current laminarity necessities.

Electrostatic Discharge: Beyond the space humidification, a few procedures are exceptionally touchy to electrostatic release harm and it is important to introduce grounded conductive deck.

Vibration and Noice Levels: Some exactness forms are exceptionally delicate to clamor and vibration.

8.Mechanical System Layout Indentification:

Various factors influence a cleanroom’s mechanical framework design: space accessibility, accessible subsidizing, process necessities, neatness arrangement, required unwavering quality, vitality cost, construction standards, and neighborhood atmosphere. Not at all like typical A/C frameworks, cleanroom A/C frameworks have considerably more supply air than expected to meet cooling and warming burdens.

Class 100,000 (ISO 8) and lower ach Class 10,000 (ISO 7) cleanrooms can have all the air experience the AHU. Taking a gander at Figure 3, the arrival air and outside air are blended, separated, cooled, warmed, and humidified before being provided to terminal HEPA channels in the roof. To forestall contaminant distribution in the cleanroom, the arrival air is gotten by low divider returns. For higher class 10,000 (ISO 7) and cleaner cleanrooms, the wind currents are too high for all the air to experience the AHU. Taking a gander at Figure 4, a little part of the arrival air is sent back to the AHU for molding. The rest of the air is come back to the course fan.

9. Perform Cooling/Heating Calculations:

When playing out the cleanroom warming/cooling computations, think about the accompanying:

Utilize the most moderate atmosphere conditions (99.6% warming plan, 0.4% drybulb/middle wetbulb cooling stoop, and 0.4% wetbulb/middle drybulb cooling outline information).

  • Incorporate filtration into figurings.
  • Incorporate humidifier complex warmth into figurings.
  • Incorporate process stack into figurings.
  • Incorporate distribution fan warm into estimations.

10. Mechanical Room Space Fight

Cleanrooms are mechanically and electrically concentrated. As the cleanroom’s tidiness arrangement moves toward becoming cleaner, more mechanical framework space is expected to give satisfactory help to the cleanroom. Utilizing a 1,000-sq-ft cleanroom for instance, a Class 100,000 (ISO 8) cleanroom will require 250 to 400 sq ft of help space, a Class 10,000 (ISO 7) cleanroom will require 250 to 750 sq ft of help space, a Class 1,000 (ISO 6) cleanroom will require 500 to 1,000 sq ft of help space, and a Class 100 (ISO 5) cleanroom will require 750 to 1,500 sq ft of help space.

For Clean Room Design under expertise read also https://www.operonstrategist.com/clean-room-design-consultant/

[ad_2]

Source by Neha Mate

Living And Working In Sustainable Environments – Energy Management Systems

[ad_1]

Energy Management Systems can range from a simple dual light switch or a dimmer to a full-blown server-based system controlling climate and lighting from an integrated energy management system. It all depends on your application which technology, if any, is most appropriate to achieve an energy-saving that outweighs the cost of the management system itself. This means the implementation cost should amortize over the lifetime of the building and the management product as well as the ongoing cost should be far less than the saving benefit attributable to the energy management system.

It is important to know that the smart grid can control mission critical energy distribution on a larger scale but local energy management devices and software can save a much larger amount of energy. Local dimming, motion sensing and daylight sensing can automate and save energy use to a far larger extent than the smart grid can also allowing users to decide for themselves what they consider mission critical for their home or business rather than the government or the energy providers.

Energy management systems of the future, and some do already deliver the future today, have to combine electrical devices, lighting, air-conditioning and heating, fresh air and heat exchangers from one central and independent system.

When replacing an outdated energy management system or implementing energy management for the first time, you may want to consider what the near future brings. For the experts it is already clear today that solid state lighting will be the future and that conventional and gas-discharge lighting is going to disappear with digital dimming rather than conventional dimming taking the stage.

In 2012 the a new ASHRAE/IES 90.1-2010 standard came into effect and it is expected to be implemented or used as the basis for a model code for states and municipalities, focusing on its prescriptive lighting power requirements as well as significant changes to its scope and administrative requirements. The updated standard has extensive new mandatory and optional lighting control requirements and its changes regarding controls are nothing short of historic.

However, those model codes do not consider the possibility of highly efficient lighting devices that can produce more light output for even less power input, allowing higher than prescribed light levels while staying well below the maximum power allowed for the application nor do they take into consideration that the power may be generated and used locally in a fully sustainable way, in which case none of the ordinances can apply as they relate only to grid supplied or publicly generated power.

This brings me to my favorite subject DC Systems mixed with AC Systems and devices that can be grid and 48-V DC powered as well as having the kind of controls required to cost effectively provide the highest levels of energy savings. Electricians have to be introduced to those new systems and the need to upgrade their knowledge to DC Systems and Controls is urgent.

Architects and Interior Designers have to request those features from Electrical and Mechanical Design companies and the ME companies have to get trained to understand the new requirements and what kind of infrastructure they need and what is available. They may want to look outside the incumbent players and consider some more advanced systems which are currently not provided by the major brands in that space but are available from new players in the field of Building Automation and 48V-DC Systems.

[ad_2]

Source by Klaus Bollmann

What Would They Say Today?

[ad_1]

Eighteen months after the terrorist attacks of 9/11, America’s healthcare leadership announced that while they had not been ready on September 11, 2001, now they were. On March 13, 2003, in a much ballyhooed statement, still sited to this day, the American College of Healthcare Executives announced:

HOSPITAL CEOs SAY BIOTERRORISM PLANS ARE IN PLACE CHICAGO

Since September 11, 2001, hospitals have faced new challenges protecting and caring for their communities, especially the threat of bioterrorism. According to a new survey conducted by the American College of Healthcare Executives (ACHE), 84 percent of hospital CEOs agree that since 9/11, their hospitals have worked more closely with public agencies (e.g. fire, police, and public health departments). Further, 95 percent of the respondents said their hospitals already have, or within six months will have, a bioterrorism disaster plan in place, developed in coordination with local emergency or health agencies.”

Little did they know the sense of false security and the cooling of momentum this assertion would cause from that day forward.

The Clear View of Reality

Since 2003, multiple independent evaluations of hospital preparedness and hospital disaster planning have found the reality in each successive year to be far below that purported in 2003. A brief survey three reports by the Institutes of Medicine in June, 2006 serve as proof that any hint of hospital preparedness is false and that momentum towards preparedness has been lost. These reports, Hospital-Based Emergency Care: At the Breaking Point, Emergency Care for Children: Growing Pains, and Emergency Medical Services at the Crossroads found a disparity between self reported preparedness on multiple association and government surveys compared to actual preparedness measured across the five core indicators of hospital preparedness.

“Evaluations of ED disaster preparedness consistently yield the same finding: EDs are better prepared than they used to be, but still fall short of where they should be”

At first blush, this seems to confirm the ACHE assertions, but the report goes on to point out that hospitals lack patient surge capacity due to cost related downsizing, nursing shortages, loss of specialists, physical space constrains and overcrowding. Failures of planning and coordination were also identified and linked to erroneous planning assumptions.

“When a disaster occurs, the normal operating assumptions about patients, responses, and treatments often must be jettisoned. Depending on the type of event, some of the nonroutine things that can happen include the following:

· Victims who are less injured and mobile will often self-transport to the nearest hospitals, quickly overwhelming those facilities.

· Casualties are likely to bypass on-site triage, first aid, and decontamination stations.

· EMS responders will often self-dispatch. Providers from other jurisdictions may appear at the scene and transport patients, sometimes without coordination or communication with local officials.

· In some cases, local facilities are not aware of the event until or just before patients start arriving. Hospitals may receive no advance notice of the extent of the event or the numbers and types of patients they can expect.

· There may be little or no communication among regional hospitals, incident commanders, public safety, and EMS responders to coordinate the response region wide.”

The Institute of Medicine reports goes on to call for improved communications and integration across disaster response services including Emergency Medical Services (EMS), community emergency operations and most importantly the implementation of the standardized Incident Command System.

“To respond effectively, hospitals must interface with incident command at multiple levels and be prepared to deal with transitions between levels, for example, when incident command shifts from the local to the state or federal level. Each hospital should be familiar with the local office of emergency preparedness and know how hospitals are represented at the emergency operations center during an event, whether through the hospital association, the health department, the EMS system, or some other mechanism.”

They Didn’t Think of That Either

Beyond the problems common to all disaster care environments, special needs populations (children, elderly, mentally and physically challenged) have needs and preparedness issues unique to them. Unfortunately, the “one size fits none” approach taken by America’s hospitals has ignored issues highlighted by the Institutes of Medicine Emergency Care for Children: Growing Pains report.

“The needs of children have traditionally been overlooked in disaster planning. Historically, the military was considered the only target of potential biological, chemical, and radiological attacks, so the focus for training, equipment, and facilities was on the care of healthy young adults.”

“Younger patients require specialized equipment and different approaches to treatment in the event of a disaster. Children cannot be properly decontaminated in adult decontamination units because they require adjustments to the water temperature and pressure (heated, high-volume, low-pressure water). Rescuers also need to have child-size clothing on-hand for use after the decontamination.”

The problems are compounded for rural hospitals. Despite the fact that many both inside and outside hospital leadership believe that rural hospitals are at lower risk and thus require less commitment to preparedness, the truth is quite the opposite.

“The focus of emergency preparedness has been on urban areas in part because of the perceived increased risk of terrorism in these areas. However, there is a danger associated with neglecting rural areas. Indeed, one might argue that rural areas may be even more vulnerable to a terrorist attack. Many nuclear power facilities, hydroelectric dams, uranium and plutonium storage facilities, and agricultural chemical facilities, as well as all U.S. Air Force missile launch facilities, are located in rural areas and are potential targets for attack. Additionally, if individuals with infectious diseases, such as smallpox, enter the country through Canadian or Mexican borders, rural providers may be the first to identify the threat.”

A Problem of Their Own Making

The greatest indictment of hospitals by the Institute of Medicine Reports however dealt with disaster preparedness training and drills finding great variability in the training of even key healthcare personnel with even less training for non-clinical hospital staff.

“Serious clinical and operational deficiencies, fragmentation, and lack of standardization exist across a broad spectrum of key professional personnel (nurses, physicians, ancillary care providers, administrators, and public health officials) in both individual training and coordination of a team response.”

This failure to provide training not only effects patient care, but hospital employee safety. Despite public statements by hospitals that “safety is worth the cost” and “preparedness is priceless” The American College of Emergency Physicians (ACEP) and the Agency for Healthcare Quality and Research (AHQR) separately found a very different financial and leadership commitment to preparedness and training.

“Many hospitals report inadequate funding to cover the attendance costs (e.g., time off, tuition, travel) of training (ACEP, 2001). At the University of Pittsburgh Medical Center, a disaster drill in the Emergency Department costs $3,000 per hour in staff salaries alone (AHRQ, 2004).”

“Additionally, the failure of hospital administrators or Emergency Department personnel to recognize the importance of training can result in a lack of support (ACEP, 2001).”

Multiple agencies, including the Institutes of Medicine have called for an increased coordinated financial commitment to preparedness on the part of individual hospitals, hospital corporations, hospital management / holding companies, as well as local, state and federal governments.

“This lack of coordination is reflected in the haphazard funding of preparedness initiatives. EMS and trauma systems have consistently been underfunded relative to their presence and role in the field.”

“States and communities should play an important role in determining how they will prepare for emergencies. To the extent that they are supported in this effort through federal preparedness grants, the critical role and vulnerabilities of hospitals must be more widely acknowledged, and the particular needs of hospitals and hospital personnel must be taken explicitly into account”

Despite this, funding for preparedness has decreased across the board including congressional cuts in healthcare preparedness funding for 2007, 2008 and again for 2009. These cuts have been mirrored in state funding initiatives; meanwhile hospitals continue to believe that they are prepared despite evidence to the contrary.

So What Should They Say Today?

Given these realities leaders in the field of healthcare and hospital management must now confront the fact that self reporting on preparedness is a failed method, no different than asking a 10 year old to grade their own final exam. With the curtain pulled back it is time for healthcare and hospitals to say:

“It is our corporate and personal responsibility to ensure the safety and preparedness of our entire staff, clinical and non-clinical as well as prepare to respond to the needs of the patients we serve every day and the patients we will serve when disaster strikes.”

The problem is that healthcare and hospital leaders have done everything in their power to quietly avoid the need to make this statement much less bring this statement into reality. In the two years since the Institutes of Medicine published their reports, hospitals have lobbied first to delay and forestall the deadlines for both Joint Commission preparedness guidelines and National Incident Management System (NIMS) compliance elements. The effect of this has been to make such things as facility beautification a higher financial priority than facility preparedness.

What is Needed?

While the Institutes of Medicine and many other organizations have made recommendations to improve hospital disaster preparedness, the sad fact is that the only way to force hospitals to properly and adequately prepare is to enforce the existing guidelines, mandate meaningful external certification of compliance and engage the public in demanding local hospitals “just do it.” There is an old adage in healthcare law:

“No change in healthcare has ever come without regulation, legislation or litigation.”

Enforcement of existing guidelines will require that the applicable government agencies including the Department of Homeland Security, FEMA, the Department of Justice, the Department of Health and Human Services and the Center for Medicare Services mandate full and complete NIMS compliance by the original September 30, 2008 deadline. Further, these agencies must be willing to use the full force of law to induce hospitals to invest in preparedness rather than pianos and fountains. Federal preparedness legislation carries with it implications of Medicare fraud, Sarbanes-Oxley violations and federal false claims issues. It is an unfortunate reality that government must all too often prosecute to create compliance.

The private sector has a responsibility to enforce preparedness guidelines as well. Joint Commission has repeatedly chosen to “partner with hospitals” rather than “punish” the recalcitrant faculties who repeatedly delay and curtail preparedness efforts. Joint Commission accreditation is a powerful force for change in hospital healthcare. The current tendency of hospitals to do as little as possible as slowly as possible necessitates that Joint Commission enforce the original preparedness compliance deadline in January of 2009 rather than permitting yet another extension.

Perhaps the best thing everyone in healthcare oversight and leadership can say to the American people is:

“We’re Sorry and We Will Do Better!

[ad_2]

Source by Maurice Ramirez